Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB 1STQ007148B0000 is a System pro E power vertical installation kit for compatible three-pole or four-pole Tmax XT5 400 A or 630 A fixed circuit breakers with rotary handle arrangements in 800 mm wide low-voltage switchboards.
£289.22
The ABB 1STQ007148B0000 is a dedicated XT5 fixed circuit breaker installation kit with rotary handle compatibility, designed for integrating suitable ABB Tmax XT5 moulded case circuit breakers into professional low-voltage electrical switchboards. Part of the ABB System pro E power range, this accessory supports coordinated mechanical installation within compatible modular switchboard structures.
Identified by ABB as XT5 KIT 3-4P FIXED+RHD(400/630A)VW=800MM, the kit is specified for compatible three-pole or four-pole Tmax XT5 circuit breakers in 400 A or 630 A configurations. The manufacturer designation identifies a fixed mounting arrangement, compatibility with a rotary handle operating mechanism, and a vertical installation orientation.
Designed for compatible 800 mm wide ABB System pro E power switchboard structures, the 1STQ007148B0000 provides an application-specific installation solution for electrical panel builders, switchgear manufacturers and industrial electrical contractors. It helps coordinate the positioning of suitable XT5 equipment within the switchboard, supporting organised and professional electrical distribution assemblies.
The ABB 1STQ007148B0000 is intended for switchboard configurations incorporating compatible fixed-mounted ABB Tmax XT5 circuit breakers. In a fixed installation, the circuit breaker is secured in its designated mounting position rather than using a plug-in or withdrawable connection arrangement. This configuration requires correctly selected mounting components and electrical connections to support the intended switchboard design.
The manufacturer's RHD designation identifies compatibility with a rotary handle operating arrangement. When combined with the appropriate XT5 circuit breaker and operating accessories, a rotary handle provides a manual interface for operating the breaker. Depending on the selected operating mechanism and enclosure design, suitable rotary handle arrangements may support convenient breaker operation from the intended access position.
The installation kit itself is a mechanical switchboard accessory. It does not independently provide electrical switching, overload protection, short-circuit protection or a complete rotary handle operating system. These functions depend on the selected circuit breaker and associated equipment.
The specified vertical installation orientation and 800 mm nominal switchboard width identify the intended ABB System pro E power configuration. The width designation refers to the compatible switchboard structure rather than an independently verified physical dimension of the installation kit.
Before assembly, panel builders should confirm the selected XT5 breaker variant, three-pole or four-pole configuration, 400 A or 630 A arrangement, rotary handle compatibility and installation requirements against the applicable ABB technical documentation.
| Product group | System pro E power |
|---|---|
| ABB order code | 1STQ007148B0000 |
| Manufacturer description | XT5 KIT 3-4P FIXED+RHD(400/630A)VW=800MM |
| Product type | Circuit breaker installation kit |
| Product category | Low-voltage switchboard installation accessories |
| Compatible circuit breaker family | ABB Tmax XT5 |
| Compatible pole configurations | 3 or 4 |
| Designated current configurations | 400 A / 630 A |
| Circuit breaker mounting configuration | Fixed |
| Operating handle arrangement | Rotary handle (RHD) compatible |
| Installation orientation | Vertical |
| Nominal switchboard width | 800 mm |
| Compatible switchboard platform | ABB System pro E power |
| Application | Low-voltage electrical distribution switchboards |
| Primary function | Mechanical integration of compatible fixed XT5 circuit breaker assemblies with rotary handle operating arrangements |
The ABB 1STQ007148B0000 is an installation kit for integrating compatible three-pole or four-pole ABB Tmax XT5 fixed circuit breakers with rotary handle arrangements into ABB System pro E power low-voltage switchboards.
The kit is specified for compatible ABB Tmax XT5 three-pole or four-pole circuit breakers in the designated 400 A or 630 A configurations. The selected breaker must be suitable for fixed mounting and the intended rotary handle arrangement.
FIXED identifies a circuit breaker installed in a fixed mounting position rather than a plug-in or withdrawable configuration. RHD refers to a rotary handle operating arrangement, which requires compatible circuit breaker and operating accessories.
The VW=800MM designation identifies a vertical installation arrangement intended for a compatible ABB System pro E power switchboard structure with a nominal width of 800 mm. It does not independently specify the physical dimensions of the installation kit.
The ABB 1STQ007148B0000 is identified as an installation kit, not a complete circuit breaker assembly. The inclusion of a circuit breaker, rotary handle or other operating accessories should not be assumed; the exact package contents must be verified with the supplier and relevant ABB documentation.
ABB System pro E power installation accessories support coordinated construction of professional low-voltage electrical switchboards. The ABB 1STQ007148B0000 provides a dedicated installation solution for compatible three-pole or four-pole Tmax XT5 fixed circuit breakers in 400 A and 630 A configurations, with rotary handle compatibility and vertical mounting in suitable 800 mm wide switchboard structures.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.