Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PTBO6030 IP65-designated open top/bottom enclosure panel for compatible System pro E power low-voltage switchgear cabinets with a nominal width of 600 mm and depth of 300 mm.
£71.67
The ABB PTBO6030, manufacturer order code 1STQ007148A0000, is an IP65 open top/bottom enclosure panel designed for ABB System pro E power low-voltage switchgear assemblies. It is specified for cabinets with a nominal 600 mm width and 300 mm depth, providing a dedicated open panel configuration for compatible top or bottom enclosure positions.
As part of the ABB System pro E power modular switchgear range, the PTBO6030 supports electrical distribution cabinet construction where an opening is required in the top or bottom of an enclosure. Its open configuration can accommodate appropriately designed cable entry arrangements or other compatible installation provisions, depending on the requirements of the completed switchgear assembly.
The IP65 designation identifies the panel for use in compatible enclosure systems designed to provide dust-tight protection and resistance to water jets. Because the PTBO6030 has an open configuration, the finished enclosure's ingress protection depends on the correct selection and installation of associated components, covers and sealing arrangements.
Top and bottom enclosure panels form part of the external construction of modular electrical distribution cabinets. Open configurations are selected when a switchgear design requires an opening rather than a solid blind closure. These arrangements may accommodate suitable cable entry systems or other compatible enclosure provisions, subject to the requirements of the complete installation.
The ABB PTBO6030 provides an open top/bottom panel configuration for compatible System pro E power cabinets with a nominal width of 600 mm and depth of 300 mm. Its IP65 designation supports use in enclosure systems designed for protection against dust and water jets. However, an unsealed opening does not independently provide IP65 protection, so the complete cabinet must incorporate appropriate components and sealing methods to achieve its required ingress protection rating.
| Product range | System pro E power |
|---|---|
| ABB order code | 1STQ007148A0000 |
| Product type | Open top/bottom enclosure panel |
| Protection designation | IP65 |
| Nominal cabinet width | 600 mm |
| Nominal cabinet depth | 300 mm |
| Panel configuration | Open |
| Installation position | Top or bottom |
| Compatible enclosure range | ABB System pro E power |
| Application | Low-voltage switchgear enclosure opening arrangement |
The ABB PTBO6030 is an open top/bottom enclosure panel designed for compatible ABB System pro E power low-voltage switchgear cabinets.
The PTBO6030 is specified for cabinets with a nominal width of 600 mm and depth of 300 mm.
The product carries an IP65 designation for compatible enclosure systems designed to provide dust-tight protection and resistance to water jets when correctly completed and assembled.
An open panel provides an opening within the enclosure arrangement, whereas a blind panel provides a solid closure without a designated opening.
Yes. The PTBO6030 is designated as an open top/bottom panel for compatible ABB System pro E power enclosure configurations.
No. Because the PTBO6030 has an open configuration, the complete enclosure must incorporate appropriate compatible components and sealing arrangements to achieve the intended IP65 protection level.
The open configuration may be incorporated into a cabinet design requiring cable entry provisions. The appropriate cable entry components and sealing methods must be selected according to the complete enclosure requirements.
The IP65 designation indicates an intended ingress protection level, but outdoor suitability depends on the complete enclosure's construction, environmental ratings and correctly sealed openings. The PTBO6030 alone does not establish outdoor suitability.
ABB System pro E power enclosure accessories support professional low-voltage switchgear construction and modular electrical distribution assemblies. The PTBO6030 provides a dedicated IP65-designated open top/bottom panel configuration for compatible 600 mm wide and 300 mm deep cabinets, supporting flexible and organised switchboard construction.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.