Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ007147A0000 ABB PTBO6020 IP65 Open Top/Bottom Panel 600 x 200 mm
ABB PTBO6020 1STQ007147A0000 is an IP65-designated open top/bottom enclosure accessory for compatible ABB System Pro E Power low-voltage switchboards with a nominal cabinet width of 600 mm and depth of 200 mm.
£70.91
Why Choose the ABB PTBO6020 IP65 Open Top/Bottom Panel?
The ABB PTBO6020 (1STQ007147A0000) is a dedicated IP65 open top/bottom enclosure accessory designed for compatible ABB System Pro E Power low-voltage electrical switchboards and distribution cabinets. This original ABB component provides an open enclosure arrangement for the upper or lower section of a modular switchboard, supporting professional electrical panel construction where a designated opening is required.
Identified by ABB as PTBO6020 — IP65 OPEN TOP/BOTTOM W=600MM D=200MM, the product is specified for a 600 mm nominal enclosure width and 200 mm nominal enclosure depth. Its open configuration distinguishes it from blind top/bottom panels, making it suitable for compatible switchboard arrangements requiring an opening for appropriately protected cable routing or other approved enclosure interfaces.
As part of the ABB System Pro E Power range, the PTBO6020 supports coordinated modular switchboard construction. Its IP65 configuration designation makes it relevant to assemblies designed for dust-tight protection and resistance to water jets, provided that the complete enclosure, opening treatments, seals and associated components are correctly selected and installed to achieve the required ingress protection rating.
Key Advantages
- Original ABB System Pro E Power accessory for compatible modular low-voltage electrical switchboards.
- IP65 protection configuration for enclosure arrangements requiring enhanced dust and water ingress protection.
- Designed for a 600 mm nominal width and 200 mm nominal depth cabinet configuration.
- Open top/bottom design provides a designated opening within a compatible enclosure structure.
- Flexible mounting position for the corresponding top or bottom section of suitable switchboards.
- Supports planned cable-entry and equipment-interface arrangements when combined with approved accessories.
- Provides a coordinated component for ABB modular switchboard construction.
- Helps distinguish open enclosure configurations from solid blind closure arrangements.
- Suitable for professional switchboard manufacturing, maintenance and refurbishment.
- ABB order code 1STQ007147A0000 supports accurate product identification and procurement.
Key Features
- ABB System Pro E Power modular switchboard accessory.
- PTBO6020 manufacturer model designation.
- IP65 open top/bottom configuration.
- 600 mm nominal enclosure width.
- 200 mm nominal enclosure depth.
- Open panel arrangement rather than a blind, fully closed configuration.
- Top or bottom installation position in compatible enclosure structures.
- Designed for integration with coordinated ABB System Pro E Power components.
- Suitable for low-voltage electrical distribution cabinet construction.
- Supports appropriately protected cable-routing and enclosure-interface arrangements.
- Applicable to compatible electrical installations requiring an IP65-configured enclosure.
- ABB manufacturer reference 1STQ007147A0000 for specification and replacement selection.
IP65 Enclosure Protection and Open Top/Bottom Integration
The ABB PTBO6020 is intended for compatible System Pro E Power switchboard structures requiring an open top or bottom enclosure arrangement. Unlike a blind panel, which provides a solid closure, the PTBO6020 is identified as an open configuration. This distinction is important when planning cable-entry routes, equipment connections and other enclosure interfaces.
The IP65 designation refers to an ingress protection classification defined by IEC 60529. The first digit, 6, identifies dust-tight protection and protection against access to hazardous parts with a wire. The second digit, 5, identifies protection against water jets under the applicable test conditions.
However, an open enclosure accessory does not independently make an exposed opening dust-tight or resistant to water jets. The achieved ingress protection rating depends on the design and assembly of the complete switchboard. Appropriate covers, seals, cable-entry components or other ABB-approved accessories may be necessary to preserve the intended IP65 protection.
The PTBO6020 is specified for a 600 mm nominal enclosure width and 200 mm nominal enclosure depth. These measurements identify the compatible cabinet configuration and should not be interpreted as independently verified external dimensions of the supplied accessory or as the dimensions of its opening.
The relatively shallow 200 mm nominal enclosure depth makes correct accessory selection particularly important when planning the available cabinet space and associated cable-entry arrangements. The precise opening dimensions, mounting details and permitted supplementary components must be checked against the applicable ABB technical drawings.
For professional panel builders, selecting the correct top/bottom component is an essential part of coordinated switchboard construction. The PTBO6020 provides the designated open arrangement for its compatible enclosure configuration while allowing the required opening treatment to be specified as part of the wider assembly design.
Before installation, engineers should confirm the compatible System Pro E Power enclosure structure, intended mounting position, required sealing components and any applicable cable-entry accessories. Modifications, additional openings or incorrectly installed components can affect the protection characteristics of the finished switchboard.
Typical Applications
- ABB System Pro E Power modular low-voltage switchboards.
- Industrial electrical power distribution cabinets.
- Commercial building electrical distribution assemblies.
- Compatible IP65-configured switchboard structures.
- Top enclosure arrangements requiring appropriately protected openings.
- Bottom enclosure arrangements incorporating suitable cable-entry provisions.
- Electrical control and industrial automation cabinets.
- Distribution systems requiring coordinated dust and water ingress protection.
- Professional switchboard manufacturing and panel assembly.
- Compatible enclosure refurbishment, maintenance and accessory replacement.
Technical Specifications
| Product group | System Pro E Power |
|---|---|
| Model / type | PTBO6020 |
| ABB order code | 1STQ007147A0000 |
| Manufacturer designation | IP65 OPEN TOP/BOTTOM W=600MM D=200MM |
| Product type | Open top/bottom enclosure accessory |
| Product category | Electrical enclosure and switchboard accessories |
| Nominal enclosure width | 600 mm |
| Nominal enclosure depth | 200 mm |
| Protection configuration | IP65 |
| IP65 first digit | 6 — dust-tight protection |
| IP65 second digit | 5 — protection against water jets |
| Panel configuration | Open top/bottom |
| Mounting location | Top or bottom |
| Compatible enclosure system | ABB System Pro E Power |
| Primary application | Low-voltage electrical distribution switchboards |
| Ingress protection consideration | Final protection depends on the complete enclosure and appropriate treatment of openings. |
Frequently Asked Questions
What is the ABB PTBO6020 1STQ007147A0000 used for?
The ABB PTBO6020 is an IP65-designated open top/bottom enclosure accessory for compatible ABB System Pro E Power low-voltage switchboards. It provides an open configuration where a designated opening is required in the upper or lower section of the enclosure.
What dimensions does the ABB PTBO6020 support?
The PTBO6020 is specified for a 600 mm nominal enclosure width and 200 mm nominal enclosure depth. These are compatible cabinet configuration dimensions rather than independently confirmed external panel or aperture measurements.
What does the IP65 protection rating mean for the PTBO6020?
IP65 identifies a dust-tight enclosure classification and protection against water jets under IEC 60529 test conditions. Because the PTBO6020 has an open configuration, suitable opening treatments and associated components are required for the completed switchboard to achieve its intended ingress protection rating.
What is the difference between an open and a blind top/bottom panel?
An open top/bottom panel provides a designated opening within a compatible enclosure arrangement, while a blind top/bottom panel provides a solid closure without a designated opening. The appropriate product depends on the switchboard design and whether cable-entry or other enclosure interfaces are required.
Can the ABB PTBO6020 be installed at either the top or bottom of a switchboard?
Yes. The ABB PTBO6020 is designated as an open top/bottom accessory for the corresponding positions in compatible System Pro E Power enclosure structures. Exact mounting compatibility and any required sealing or cable-entry accessories should be verified against ABB's installation documentation.
Trusted ABB Electrical Enclosure Engineering
ABB System Pro E Power accessories support coordinated, modular and maintainable low-voltage electrical switchboard construction. The PTBO6020 IP65 open top/bottom accessory provides a dedicated enclosure configuration for compatible 600 mm wide and 200 mm deep cabinets, supporting professional installation planning where appropriately protected top or bottom openings are required.
