Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB 1STQ007146B0000 System Pro E Power N2 XT5 installation accessory for compatible 400–630 A three-pole or four-pole Tmax XT5 circuit-breaker arrangements, specified for a 600 mm nominal switchboard width with F_V, T F and NO SEG configuration designations.
£308.19
The ABB 1STQ007146B0000 is a dedicated System Pro E Power installation accessory for compatible ABB Tmax XT5 moulded case circuit-breaker arrangements. Identified by the manufacturer as N2 XT5 400_630A 3_4P F_V_W600 T F NO SEG, this product is intended for the specified N2 configuration within ABB's modular low-voltage switchboard system.
The manufacturer designation identifies compatibility with the ABB Tmax XT5 circuit-breaker family, a 400–630 A current-class range, and three-pole or four-pole configurations. It also specifies a 600 mm nominal switchboard width and includes the configuration codes N2, F_V, T F and NO SEG, which are important when selecting the correct installation accessory.
Designed for professional electrical panel builders, switchboard manufacturers and electrical engineers, the ABB 1STQ007146B0000 supports coordinated equipment integration within compatible System Pro E Power assemblies. Its specific manufacturer designation helps distinguish the required arrangement from other XT5 accessories intended for different current classes, compartment widths, mounting configurations or segregation requirements.
The ABB Tmax XT5 family comprises moulded case circuit breakers used in low-voltage electrical distribution systems. Depending on the selected breaker and installation accessories, XT5 equipment can be incorporated into switchboards with different mechanical mounting, connection and operating arrangements.
The ABB 1STQ007146B0000 is identified for an N2 XT5 configuration covering the manufacturer's stated 400–630 A range and compatible three-pole or four-pole circuit breakers. These parameters help electrical engineers distinguish the product from accessories intended for other breaker families, current classes or pole arrangements.
The F_V designation is part of ABB's installation configuration coding. It should be retained when matching the accessory to the required switchboard arrangement. Although the code may relate to mounting characteristics, the precise mechanical configuration should be verified against ABB's relevant technical drawings rather than inferred from the abbreviation alone.
Similarly, the T F designation identifies an additional manufacturer-specific variant. Its exact function and the components supplied with this accessory should be established using the corresponding ABB catalogue and assembly instructions.
The specified 600 mm nominal width is a key selection parameter for the compatible System Pro E Power cabinet arrangement. It identifies the intended switchboard width configuration rather than independently confirming the external dimensions of the supplied accessory or the full compartment dimensions.
The manufacturer's NO SEG designation indicates a configuration identified as having no segregation. This is important when considering the internal arrangement of a switchboard. However, it does not independently establish the complete assembly's form of internal separation or confirm compliance with any particular segregation classification under IEC 61439.
Where internal separation is required by the electrical design, the selected enclosure structure, barriers, mounting equipment and associated accessories must be checked against the applicable ABB System Pro E Power documentation. A product identified as NO SEG should not be substituted for a segregated configuration without verifying the design requirements.
The 400–630 A designation describes the current-class range associated with the specified installation accessory. It does not independently determine the rated current of a completed switchboard or confirm the suitability of every XT5 breaker variant within that range. Final electrical ratings depend on the selected protective devices, connections, operating conditions and verified assembly design.
The ABB 1STQ007146B0000 is an installation accessory rather than a complete protective circuit breaker. The precise supplied contents, compatible breaker variants, mounting requirements and any separately required components should be confirmed using ABB's technical documentation before procurement or installation.
| Product group | System Pro E Power |
|---|---|
| ABB order code | 1STQ007146B0000 |
| Manufacturer designation | N2 XT5 400_630A 3_4P F_V_W600 T F NO SEG |
| Product type | XT5 switchboard installation accessory |
| Product category | Circuit-breaker installation and switchboard accessories |
| Compatible circuit-breaker family | ABB Tmax XT5 |
| Manufacturer configuration | N2 |
| Specified current-class range | 400–630 A |
| Pole configuration | 3-pole / 4-pole |
| Installation configuration code | F_V |
| Nominal switchboard width | 600 mm |
| Additional manufacturer variant code | T F |
| Segregation designation | NO SEG |
| Compatible switchboard system | ABB System Pro E Power |
| Primary application | Low-voltage electrical distribution assemblies |
| Equipment classification | Switchboard installation accessory |
The ABB 1STQ007146B0000 is a System Pro E Power installation accessory intended for compatible ABB Tmax XT5 circuit-breaker arrangements in the 400–630 A current-class range, with three-pole or four-pole configurations and a 600 mm nominal switchboard width.
The manufacturer designation identifies the ABB Tmax XT5 circuit-breaker family, a 400–630 A current-class range and three-pole or four-pole configurations. Exact breaker variants and installation compatibility must be verified against ABB's technical documentation.
N2, F_V and T F are manufacturer-specific configuration codes used to identify the required ABB switchboard accessory arrangement. Their precise mechanical meaning and associated components should be confirmed from the relevant ABB catalogue and installation drawings.
NO SEG identifies the manufacturer's non-segregated configuration. It does not independently establish the complete switchboard's form of internal separation. Any segregation requirements must be assessed against the complete assembly design and applicable ABB documentation.
The ABB 1STQ007146B0000 is identified as a System Pro E Power installation accessory, not a complete XT5 protective circuit breaker. The inclusion of a breaker or other electrical and mechanical components should not be assumed. Confirm the exact supplied contents and separately required accessories with ABB's product documentation.
ABB System Pro E Power accessories support coordinated, modular and maintainable low-voltage electrical switchboard construction. The 1STQ007146B0000 N2 XT5 accessory provides a designated installation configuration for compatible three-pole and four-pole Tmax XT5 arrangements in the 400–630 A current class, with a 600 mm nominal switchboard width and the manufacturer's specified F_V, T F and NO SEG configuration codes.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.