Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ007146A0000 ABB PTBO5070 IP65 Open Top/Bottom Panel 500 x 700 mm
ABB PTBO5070 (1STQ007146A0000) is a System pro E power IP65-designated open top/bottom enclosure panel for compatible low-voltage switchgear cabinets with a nominal width of 500 mm and depth of 700 mm, requiring suitable assembly and sealing arrangements to achieve the intended enclosure protection.
£85.68
Why Choose the ABB PTBO5070 IP65 Open Top/Bottom Panel?
The ABB PTBO5070 (1STQ007146A0000) is a dedicated IP65 open top/bottom enclosure panel designed for compatible ABB System pro E power low-voltage switchgear assemblies. Identified by ABB as PTBO5070 — IP65 OPEN TOP/BOTTOM W=500MM D=700MM, this accessory is specified for electrical enclosure configurations with a nominal width of 500 mm and depth of 700 mm.
Part of the ABB System pro E power modular switchgear range, the PTBO5070 supports professional electrical panel construction where enclosure compatibility, planned cable routing and coordinated component installation are important. Its open top/bottom configuration distinguishes it from blind enclosure panels, making it suitable for cabinet arrangements requiring a designated opening rather than a completely closed covering surface.
The manufacturer's IP65 designation identifies the intended ingress protection configuration for the compatible enclosure system. IP65 describes a dust-tight enclosure arrangement with protection against water jets. Because the PTBO5070 is an open panel, achieving this protection level in the completed cabinet depends on the correct installation of compatible sealing, cable entry or closure components. The panel alone should not be assumed to provide an IP65 seal across an uncovered opening.
Key Advantages
- Purpose-designed ABB System pro E power enclosure accessory for compatible low-voltage switchgear assemblies.
- IP65 manufacturer designation for the specified enclosure configuration.
- Open top/bottom panel design for installations requiring a planned enclosure opening.
- Compatible with specified 500 mm-wide and 700 mm-deep enclosure arrangements.
- Supports the integration of suitable cable entry or enclosure interface components.
- Provides an application-specific alternative to a blind top/bottom panel.
- Designed for integration with compatible ABB System pro E power modular enclosure components.
- Supports organised electrical cabinet construction and assembly planning.
- Suitable for professional industrial and commercial switchboard applications.
Key Features
- ABB PTBO5070 product designation.
- ABB order code 1STQ007146A0000.
- System pro E power modular switchgear compatibility.
- IP65 manufacturer ingress protection designation.
- Open panel configuration.
- Top or bottom enclosure application.
- 500 mm nominal compatible enclosure width.
- 700 mm nominal compatible enclosure depth.
- Designed for enclosure arrangements requiring a designated opening.
- Intended for compatible low-voltage electrical distribution and switchgear cabinets.
Reliable Open Top/Bottom Integration for IP65 Switchgear Enclosures
Top and bottom enclosure panels form an important part of modular electrical distribution cabinet construction. An open panel is selected when the enclosure design requires a designated opening for compatible cable entry arrangements or other planned enclosure interfaces. Choosing the appropriate ABB panel helps electrical panel builders coordinate the enclosure layout with internal switchgear components and external connections.
The ABB PTBO5070 is specified for compatible System pro E power enclosures with a 500 mm nominal width and 700 mm nominal depth. These figures identify the intended enclosure configuration rather than necessarily representing the panel's measured external dimensions. The 700 mm depth designation is particularly important when distinguishing this accessory from similar ABB top/bottom panels intended for shallower enclosure arrangements.
Although the product carries an IP65 designation, the completed enclosure's ingress protection depends on the correct treatment of its opening. Suitable cable entry systems, seals, covers and other complementary components may be required, depending on the installation. The relevant ABB assembly instructions should be followed to establish the intended protection level of the finished cabinet.
Typical Applications
- ABB System pro E power low-voltage switchgear assemblies.
- Industrial electrical distribution cabinets and switchboards.
- Commercial electrical distribution panels.
- Compatible enclosure arrangements designed to achieve IP65 protection.
- Top or bottom enclosure positions requiring an open-panel configuration.
- Electrical cabinet designs incorporating suitably sealed cable entry systems.
- Modular switchgear assemblies with a 500 mm width and 700 mm depth designation.
- OEM electrical panel manufacturing and switchboard construction.
- Compatible electrical enclosure installation, modification and refurbishment projects.
Technical Specifications
| Product group | System pro E power |
|---|---|
| Product designation | PTBO5070 |
| ABB order code | 1STQ007146A0000 |
| Manufacturer description | IP65 OPEN TOP/BOTTOM W=500MM D=700MM |
| Product type | Open top/bottom enclosure panel |
| Ingress protection designation | IP65 |
| Solid-object protection associated with IP65 | Dust-tight |
| Water ingress protection associated with IP65 | Protection against water jets in a correctly assembled enclosure |
| Compatible enclosure width | 500 mm |
| Compatible enclosure depth | 700 mm |
| Panel configuration | Open |
| Installation position | Top or bottom |
| Compatible enclosure system | ABB System pro E power |
| Application | Low-voltage electrical distribution and switchgear enclosures |
Frequently Asked Questions
What is the ABB PTBO5070 used for?
The ABB PTBO5070 is an open top/bottom enclosure panel for compatible ABB System pro E power low-voltage switchgear assemblies. It is intended for installations requiring a designated opening rather than a completely blind covering panel.
What does the IP65 designation mean for the PTBO5070?
IP65 describes a dust-tight enclosure configuration with protection against water jets. Because the PTBO5070 is an open panel, the complete assembly must incorporate suitable compatible sealing and closure arrangements to achieve the intended ingress protection. The panel alone does not make an uncovered opening IP65-rated.
Which enclosure dimensions are compatible with the ABB PTBO5070?
The PTBO5070 is designated for compatible ABB System pro E power enclosures with a nominal width of 500 mm and depth of 700 mm. These values describe the intended enclosure configuration rather than necessarily the external measurements of the panel itself.
What is the difference between the ABB PTBO5070 open panel and a blind top/bottom panel?
The PTBO5070 open panel provides a designated enclosure opening, while a blind top/bottom panel provides a closed covering surface without a designated opening. The correct choice depends on the cabinet layout, cable entry requirements and intended enclosure protection arrangement.
Can the ABB PTBO5070 be installed at either the top or bottom of an enclosure?
ABB identifies the PTBO5070 as a top/bottom enclosure panel. Installation in the required position must follow the relevant ABB assembly instructions, including any necessary fixings, sealing components and compatible accessories.
Trusted by Electrical Panel Builders Worldwide
ABB System pro E power enclosure accessories provide application-specific components for professional low-voltage switchgear construction. The PTBO5070 IP65 open top/bottom panel offers a dedicated solution for compatible 500 mm-wide and 700 mm-deep enclosure arrangements requiring a planned opening, supporting organised modular cabinet assembly and coordinated ingress protection design.
