Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PTBO4050 IP65-designated open top/bottom enclosure panel for compatible System pro E power low-voltage switchgear cabinets with a nominal width of 400 mm and depth of 500 mm.
£49.94
The ABB PTBO4050, manufacturer order code 1STQ007142A0000, is an IP65 open top/bottom enclosure panel designed for ABB System pro E power low-voltage switchgear assemblies. It is specified for cabinets with a nominal 400 mm width and 500 mm depth, providing a dedicated open panel configuration for compatible top or bottom enclosure positions.
As part of the ABB System pro E power modular switchgear range, the PTBO4050 supports professional electrical distribution cabinet construction where an open top or bottom arrangement is required. Its open configuration allows the enclosure design to accommodate appropriately selected cable entry components or other compatible installation provisions.
The IP65 designation identifies the product for use within compatible enclosure systems designed to provide dust-tight protection and resistance to water jets. Because the PTBO4050 is an open panel, the final ingress protection depends on the complete assembly, including suitable covers, cable entry components and sealing arrangements. Its 400 mm width and 500 mm depth compatibility make it a purpose-designed accessory for the specified System pro E power cabinet configuration.
Top and bottom enclosure panels are important components in modular low-voltage switchgear construction. Open configurations are used where the cabinet design requires an opening rather than a solid blind closure. Such arrangements can accommodate appropriately designed cable entry systems or other compatible enclosure provisions, depending on the requirements of the complete electrical installation.
The ABB PTBO4050 provides an open top/bottom panel configuration for compatible System pro E power cabinets with a nominal width of 400 mm and depth of 500 mm. Its IP65 designation supports use in enclosure systems designed for protection against dust and water jets. However, an unsealed opening does not independently provide IP65 protection; the complete cabinet must incorporate the correct components and sealing methods to achieve its specified ingress protection rating.
| Product range | System pro E power |
|---|---|
| ABB order code | 1STQ007142A0000 |
| Product type | Open top/bottom enclosure panel |
| Protection designation | IP65 |
| Nominal cabinet width | 400 mm |
| Nominal cabinet depth | 500 mm |
| Panel configuration | Open |
| Installation position | Top or bottom |
| Compatible enclosure range | ABB System pro E power |
| Application | Low-voltage switchgear enclosure opening arrangement |
The ABB PTBO4050 is an open top/bottom enclosure panel designed for compatible ABB System pro E power low-voltage switchgear cabinets.
The PTBO4050 is specified for cabinets with a nominal width of 400 mm and depth of 500 mm.
The product carries an IP65 designation for compatible enclosure systems designed to provide dust-tight protection and resistance to water jets when correctly completed and assembled.
An open panel provides an opening within the enclosure arrangement, whereas a blind panel provides a solid closure without a designated opening.
Yes. The PTBO4050 is designated as an open top/bottom panel for compatible ABB System pro E power enclosure configurations.
No. Because the PTBO4050 has an open configuration, the complete enclosure must incorporate appropriate compatible components and sealing arrangements to achieve the intended IP65 protection level.
The open configuration may be incorporated into a cabinet design requiring cable entry provisions. The appropriate cable entry components and sealing methods must be selected according to the complete enclosure requirements.
The IP65 designation indicates an intended ingress protection level, but outdoor suitability depends on the complete enclosure's construction, environmental ratings and correctly sealed openings. The PTBO4050 alone does not establish outdoor suitability.
ABB System pro E power enclosure accessories support professional low-voltage switchgear construction and modular electrical distribution assemblies. The PTBO4050 provides a dedicated IP65-designated open top/bottom panel configuration for compatible 400 mm wide and 500 mm deep cabinets, supporting flexible, consistent and organised switchboard construction.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.