Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB 1STQ007137B0000 is a System pro E power installation kit for compatible XT5 630 three-pole or four-pole plug-in circuit breakers, designed for a vertical switchgear arrangement with a 400 mm installation height, 600 mm assembly width and N1 manufacturer configuration designation.
£257.05
The ABB 1STQ007137B0000 is a dedicated XT5 630 plug-in circuit breaker installation kit designed for compatible ABB System pro E power low-voltage switchgear assemblies. Identified by ABB as KIT XT5 630 PLUG-IN 3/4PVER H400 W600 N1, this accessory supports the integration of compatible ABB XT5 630 moulded-case circuit breakers in a vertical, plug-in installation arrangement.
Part of the ABB System pro E power modular switchgear range, the kit is specified for three-pole (3P) and four-pole (4P) circuit breaker configurations. Its designated installation space is 400 mm high and 600 mm wide, helping electrical panel builders select the appropriate assembly arrangement for the intended XT5 equipment.
The manufacturer's 630 designation identifies the associated XT5 equipment range, while PLUG-IN identifies the intended circuit breaker connection arrangement. The N1 suffix is retained as an ABB configuration identifier and should be checked against the relevant manufacturer documentation when confirming compatibility, installation requirements and supplied components.
Plug-in moulded-case circuit breaker arrangements are used in low-voltage switchgear where the selected breaker connects through a compatible plug-in mounting and connection system. This configuration differs from fixed circuit breaker installation and requires the correct associated equipment and assembly components. Selecting an installation kit with the appropriate circuit breaker family, pole configuration and mounting orientation is an important part of switchboard planning.
The ABB 1STQ007137B0000 is specifically designated for XT5 630 plug-in equipment in a vertical arrangement with an installation height of 400 mm and assembly width of 600 mm. These values identify the intended switchgear configuration rather than necessarily representing the kit's physical external dimensions. The installation kit does not itself provide circuit protection, and its XT5 630 designation should not be interpreted as an independent current rating of the accessory.
The N1 suffix forms part of the manufacturer's exact product identification. Before installation, confirm the applicable ABB assembly instructions, compatible XT5 circuit breaker variant, plug-in connection components and any additional accessories required for the completed switchgear arrangement.
| Product group | System pro E power |
|---|---|
| ABB order code | 1STQ007137B0000 |
| Manufacturer designation | KIT XT5 630 PLUG-IN 3/4PVER H400 W600 N1 |
| Product type | Circuit breaker installation kit |
| Compatible circuit breaker family | ABB XT5 |
| Compatible equipment designation | XT5 630 |
| Connection arrangement | Plug-in |
| Compatible pole configurations | 3P / 4P |
| Installation orientation | Vertical |
| Installation height designation | 400 mm |
| Assembly width designation | 600 mm |
| Manufacturer configuration suffix | N1 |
| Compatible switchgear system | ABB System pro E power |
| Application | Low-voltage electrical distribution and switchgear assemblies |
The ABB 1STQ007137B0000 is an installation kit for compatible ABB XT5 630 plug-in moulded-case circuit breakers in a vertical System pro E power switchgear arrangement.
Yes. The manufacturer's 3/4P designation identifies the intended three-pole and four-pole XT5 configurations. Exact circuit breaker and plug-in component compatibility should be confirmed against ABB's installation documentation.
H400 identifies a designated installation height of 400 mm, while W600 identifies a designated assembly width of 600 mm. These values refer to the intended switchgear arrangement rather than necessarily the kit's measured external dimensions.
N1 is part of ABB's manufacturer configuration designation for this installation kit. Its precise technical significance should be verified using the relevant ABB product and assembly documentation rather than assumed from the suffix alone.
The product is identified as an installation kit, not a complete circuit breaker assembly. The inclusion of an XT5 circuit breaker, plug-in base, connection components or other accessories should not be assumed. Check the manufacturer's bill of materials and supplied contents before ordering.
ABB System pro E power installation accessories provide application-specific solutions for professional low-voltage switchgear construction. The 1STQ007137B0000 XT5 630 plug-in installation kit supports compatible three-pole and four-pole circuit breaker arrangements within a vertical, 400 mm-high and 600 mm-wide switchgear configuration, helping panel builders coordinate equipment selection and modular assembly design.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.