Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PTBO3050 (1STQ007137A0000) is a System pro E power IP65-designated open top/bottom enclosure panel for compatible low-voltage switchgear configurations with nominal dimensions of 300 mm and 500 mm, subject to correct assembly and sealing arrangements.
£38.92
The ABB PTBO3050 (1STQ007137A0000) is a dedicated IP65 open top/bottom enclosure panel designed for compatible ABB System pro E power low-voltage switchgear assemblies. Identified by ABB as PTBO3050 — IP65 OPEN TOP/BOTTTOM W/D300MM D/W=500MM, this accessory is specified for an enclosure configuration with nominal dimensions of 300 mm and 500 mm.
Part of the ABB System pro E power modular switchgear range, the PTBO3050 supports professional electrical panel construction where enclosure compatibility, cable routing and coordinated assembly are important. Its open top/bottom configuration distinguishes it from blind enclosure panels, making it relevant to installations requiring an opening in the designated top or bottom enclosure position.
The manufacturer's IP65 designation identifies the intended protection configuration for the compatible enclosure system. IP65 denotes a dust-tight enclosure arrangement with protection against water jets when the complete assembly is correctly designed and installed. Because the PTBO3050 is an open panel, the finished enclosure's protection depends on the appropriate treatment of openings, cable entries, seals and associated components. The panel alone should not be assumed to provide an IP65 seal.
Top and bottom enclosure panels are important components of modular electrical distribution cabinets. An open panel is selected where the enclosure design requires a planned opening rather than a completely blind covering surface. Depending on the completed installation, this may support cable entry arrangements or other compatible enclosure interface components. Selecting the appropriate ABB accessory helps coordinate the mechanical construction of the switchgear cabinet.
The ABB PTBO3050 is designated for a 300 mm × 500 mm System pro E power enclosure configuration. ABB's description uses the paired notation W/D300MM D/W=500MM, so the exact width/depth orientation should be verified against the intended enclosure and the relevant ABB assembly drawings. These dimensions identify the nominal application configuration and should not automatically be treated as the panel's measured external dimensions.
Although the product carries an IP65 designation, its open construction means that suitable sealing arrangements and any associated cable entry or closure components must be considered when completing the enclosure. The finished cabinet's ingress protection depends on the entire installed assembly, not the panel designation alone.
| Product group | System pro E power |
|---|---|
| Product designation | PTBO3050 |
| ABB order code | 1STQ007137A0000 |
| Manufacturer description | IP65 OPEN TOP/BOTTTOM W/D300MM D/W=500MM |
| Product type | Open top/bottom enclosure panel |
| Ingress protection designation | IP65 |
| Protection associated with IP65 | Dust-tight and protected against water jets in a correctly assembled enclosure |
| First nominal enclosure dimension | 300 mm |
| Second nominal enclosure dimension | 500 mm |
| Manufacturer dimension notation | W/D 300 mm; D/W 500 mm |
| Panel configuration | Open |
| Installation position | Top or bottom |
| Compatible enclosure system | ABB System pro E power |
| Application | Low-voltage electrical distribution and switchgear enclosures |
The ABB PTBO3050 is an open top/bottom enclosure panel for compatible ABB System pro E power low-voltage switchgear assemblies. It is intended for applications where the enclosure design requires an open panel rather than a blind covering plate.
IP65 describes a dust-tight enclosure configuration protected against water jets. Because the PTBO3050 is an open panel, the complete assembly must use suitable compatible sealing and closure arrangements to achieve the intended ingress protection. The panel alone does not establish an IP65 rating for an open aperture.
ABB specifies nominal dimensions of 300 mm and 500 mm, using the notation W/D300MM D/W=500MM. The exact width/depth orientation and compatibility should be checked against the intended System pro E power enclosure and ABB assembly documentation.
An open panel provides an opening for the intended enclosure arrangement, while a blind panel provides a closed covering surface without a designated opening. The correct option depends on the cabinet layout, cable entry requirements and protection design.
ABB identifies the PTBO3050 as a top/bottom enclosure panel. Installation in either position must follow the relevant ABB assembly instructions, including any required fixings, sealing components and compatible accessories.
ABB System pro E power enclosure accessories provide application-specific components for professional low-voltage switchgear construction. The PTBO3050 IP65 open top/bottom panel supports compatible 300 mm × 500 mm enclosure configurations where a planned opening is required, helping panel builders coordinate modular cabinet construction with the appropriate sealing and cable entry arrangements.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.