Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ007131B0000 ABB XT5 4-Pole Fixed RCD Installation Kit 400 A Vertical W400
ABB 1STQ007131B0000 System Pro E Power XT5 installation kit for compatible four-pole fixed Tmax XT5 circuit-breaker arrangements with residual current protection equipment, specified for a 400 A current class and vertical mounting in a 400 mm nominal width switchboard.
£221.80
Why Choose the ABB 1STQ007131B0000 XT5 Four-Pole Fixed RCD Installation Kit?
The ABB 1STQ007131B0000 is a dedicated XT5 four-pole fixed circuit-breaker installation kit for residual current protection configurations, designed for compatible ABB Tmax XT5 moulded case circuit breakers within the ABB System Pro E Power modular switchboard system. This accessory supports the integration of suitable circuit-breaker equipment into professional low-voltage electrical distribution assemblies.
Identified by ABB as XT5 KIT 4P FIXED+RCD.(400A)VERT. W=400MM, the kit is specified for a four-pole fixed-mounted XT5 circuit-breaker arrangement incorporating a compatible residual current device configuration. The manufacturer designation identifies a 400 A current class, vertical installation orientation and 400 mm nominal switchboard width.
Part of the established ABB System Pro E Power range, the 1STQ007131B0000 is intended for electrical panel builders, switchboard manufacturers and installation engineers who require a dedicated mounting solution for an XT5 circuit breaker with residual current protection equipment. Its defined configuration helps support accurate component selection, coordinated panel layouts and professional switchboard assembly.
Key Advantages
- Original ABB System Pro E Power installation accessory designed for compatible low-voltage switchboards.
- ABB Tmax XT5 compatibility designation for the specified circuit-breaker installation arrangement.
- Four-pole configuration suitable for compatible four-pole electrical distribution applications.
- Fixed-mounted installation provides a dedicated arrangement for the specified circuit-breaker configuration.
- RCD-compatible configuration supports integration with suitable residual current protection equipment.
- 400 A current-class designation for the intended XT5 installation.
- Vertical mounting orientation supports the corresponding switchboard compartment layout.
- Designed for a 400 mm nominal switchboard width.
- Supports coordinated electrical panel construction using ABB modular switchboard components.
- Dedicated manufacturer order code helps ensure accurate product identification and procurement.
Key Features
- ABB System Pro E Power modular switchboard accessory.
- XT5 installation kit for compatible ABB Tmax XT5 moulded case circuit breakers.
- Four-pole circuit-breaker configuration.
- Fixed installation version rather than a plug-in or withdrawable mounting arrangement.
- Residual current device configuration identified by the manufacturer's RCD designation.
- 400 A specified current class.
- Vertical circuit-breaker mounting orientation.
- 400 mm nominal switchboard width.
- Designed for integration into compatible low-voltage distribution switchboards.
- Supports installation planning for circuit-breaker and residual current protection assemblies.
- ABB order code 1STQ007131B0000 for precise identification and replacement selection.
Engineered for Fixed XT5 Circuit Breakers with Residual Current Protection
The ABB Tmax XT5 moulded case circuit-breaker family is used in low-voltage electrical distribution systems requiring circuit protection and switching functionality. Depending on the selected circuit-breaker version and associated accessories, XT5 equipment can be incorporated into distribution assemblies with additional protection and control functions.
The ABB 1STQ007131B0000 is specifically designated for a four-pole fixed XT5 installation with an RCD configuration. This distinguishes it from XT5 installation accessories intended for standard fixed arrangements without residual current equipment, as well as plug-in and withdrawable circuit-breaker configurations.
Residual current protection is used to detect specified imbalances between outgoing and returning currents in an electrical circuit. When a compatible residual current protection device is correctly selected and installed, it can contribute to protection against earth-fault conditions in accordance with the requirements of the electrical installation.
The manufacturer's FIXED+RCD designation identifies the intended mechanical installation arrangement. It does not independently establish that a residual current device is supplied with the kit, nor does it specify the residual operating current, tripping time, sensitivity or protection characteristics of the completed installation. Those properties depend on the actual residual current equipment and circuit breaker selected.
The vertical mounting orientation and 400 mm nominal switchboard width are important parameters for matching this accessory to the intended System Pro E Power compartment. Panel builders should verify the exact XT5 breaker variant, compatible RCD equipment, mounting components, electrical clearances and enclosure arrangement using the applicable ABB technical documentation.
The 400 A designation identifies the specified current class of this installation configuration. It should not be treated as independent confirmation of the rated current or current-carrying capacity of the completed switchboard. Final assembly ratings depend on the selected protective devices, connections, thermal conditions and verified switchboard design.
The ABB 1STQ007131B0000 is an installation accessory kit rather than a complete protective circuit breaker or standalone residual current device. The precise supplied contents and any separately required electrical or mechanical accessories should be confirmed against ABB's product documentation before installation.
Typical Applications
- ABB System Pro E Power modular low-voltage switchboards.
- Compatible ABB Tmax XT5 four-pole fixed circuit-breaker installations.
- Electrical distribution assemblies incorporating residual current protection.
- Industrial low-voltage power distribution cabinets.
- Commercial building electrical distribution switchboards.
- Vertical circuit-breaker mounting in compatible switchboard compartments.
- Three-phase distribution systems requiring suitable four-pole protection equipment.
- Industrial electrical control and distribution infrastructure.
- Professional switchboard manufacturing and electrical panel assembly.
- Compatible switchboard maintenance, refurbishment and installation accessory replacement.
Technical Specifications
| Product group | System Pro E Power |
|---|---|
| ABB order code | 1STQ007131B0000 |
| Manufacturer designation | XT5 KIT 4P FIXED+RCD.(400A)VERT. W=400MM |
| Product type | Fixed circuit-breaker installation kit for RCD configuration |
| Product category | Circuit-breaker mounting and installation accessories |
| Compatible circuit-breaker family | ABB Tmax XT5 |
| Pole configuration | 4-pole |
| Installation version | Fixed |
| Residual current protection configuration | RCD-compatible arrangement |
| Specified current class | 400 A |
| Mounting orientation | Vertical |
| Nominal switchboard width | 400 mm |
| Compatible switchboard system | ABB System Pro E Power |
| Primary application | Low-voltage electrical distribution assemblies |
| Equipment classification | Switchboard installation accessory |
Frequently Asked Questions
What is the ABB 1STQ007131B0000 used for?
The ABB 1STQ007131B0000 is an XT5 installation kit designed for compatible four-pole, fixed-mounted ABB Tmax XT5 circuit-breaker arrangements incorporating residual current protection equipment within System Pro E Power switchboards.
Which circuit breakers are compatible with the ABB 1STQ007131B0000?
The kit is designated for compatible ABB Tmax XT5 four-pole circuit breakers in fixed-mounted configurations with suitable residual current protection equipment. Exact breaker and RCD compatibility must be verified against ABB's installation documentation.
What does FIXED+RCD mean in the product designation?
FIXED+RCD identifies a fixed-mounted circuit-breaker installation arrangement intended to accommodate compatible residual current protection equipment. It does not confirm that the circuit breaker or residual current device is included with the installation kit.
What current class, orientation and switchboard width are specified?
The ABB 1STQ007131B0000 is specified for a 400 A current-class configuration, vertical installation and a compatible 400 mm nominal switchboard width. The final electrical ratings depend on the selected equipment and completed assembly.
Does the ABB 1STQ007131B0000 include a complete circuit breaker and RCD?
The ABB 1STQ007131B0000 is identified as a circuit-breaker installation accessory kit, not a complete circuit-breaker and residual current protection assembly. The inclusion of protective devices should not be assumed; check ABB's product documentation for the exact supplied components and any separately required accessories.
Trusted ABB Low-Voltage Switchboard Engineering
ABB System Pro E Power accessories support coordinated, modular and maintainable low-voltage electrical switchboard construction. The 1STQ007131B0000 XT5 installation kit provides a dedicated mounting solution for compatible four-pole, fixed circuit-breaker arrangements with residual current protection equipment, designed for vertical installation in a 400 mm nominal width switchboard configuration.
