1STQ007131A0000 ABB PTBB1290 IP40 Blind Top/Bottom Panel 1250 x 900 mm

1STQ007131A0000 ABB PTBB1290 IP40 Blind Top/Bottom Panel 1250 x 900 mm

ABB PTBB1290 1STQ007131A0000 is an IP40 blind top/bottom enclosure panel for compatible ABB System Pro E Power low-voltage switchboards with a nominal cabinet width of 1250 mm and depth of 900 mm.

SKU: 1STQ007131A0000Alt SKU: PTBB1290MPN: 1STQ007131A0000
Price
List Price £186.07 ex VAT
Your Price (ex VAT)
£186.07
Manufacturer Lead Time Estimated Delivery 6 weeks
Get the best trade prices Trade exclusive

Create an online account to unlock exclusive pricing, special offers and more.

Create an online account Quick & easy setup
SUBTOTAL (EX VAT) £186.07
Trade pricing is personalised to your account

Manufacturer Lead Time

£186.07

Why Choose the ABB PTBB1290 IP40 Blind Top/Bottom Panel?

The ABB PTBB1290 (1STQ007131A0000) is a dedicated IP40 blind top/bottom enclosure panel designed for compatible ABB System Pro E Power low-voltage electrical switchboards and power distribution cabinets. This original ABB enclosure accessory provides a solid closure for the upper or lower section of a switchboard, supporting the construction of organised, protected and professionally assembled electrical distribution systems.

Identified by ABB as PTBB1290 — IP40 BLIND TOP/BOTTOM W=1250MM D=900MM, the panel is specified for a 1250 mm nominal enclosure width and 900 mm nominal enclosure depth. Its blind construction provides a closure without designated cable-entry openings, making it suitable for compatible switchboard configurations where a solid top or bottom panel is required.

As part of the ABB System Pro E Power series, the PTBB1290 is intended for professional electrical panel builders, switchboard manufacturers and installation engineers. Its IP40 protection configuration supports the enclosure's intended protection against access to hazardous parts and the entry of solid foreign objects when the complete assembly is correctly constructed and installed.

Key Advantages

  • Original ABB System Pro E Power accessory for compatible modular low-voltage switchboards.
  • IP40 protection configuration for electrical enclosures requiring protection against solid foreign objects.
  • Designed for a 1250 mm wide × 900 mm deep nominal switchboard configuration.
  • Blind panel design provides a solid enclosure closure without designated cable-entry openings.
  • Top or bottom installation allows use in the corresponding positions of compatible enclosure assemblies.
  • Supports the protective separation of internal electrical equipment from the surrounding environment.
  • Provides a coordinated enclosure component for ABB modular switchboard construction.
  • Suitable for professional electrical distribution cabinet assembly, maintenance and refurbishment.
  • Dedicated ABB product identification helps simplify accessory selection and replacement.

Key Features

  • ABB System Pro E Power modular switchboard accessory.
  • PTBB1290 manufacturer type designation.
  • IP40 blind top/bottom panel for compatible electrical enclosures.
  • 1250 mm nominal enclosure width.
  • 900 mm nominal enclosure depth.
  • Solid closure configuration without designated cable-entry openings.
  • Top or bottom mounting position in compatible System Pro E Power assemblies.
  • Designed for integration with coordinated ABB enclosure components.
  • Suitable for low-voltage electrical switchboard construction.
  • Supports indoor distribution cabinet applications where IP40 protection is appropriate.
  • ABB order code 1STQ007131A0000 for accurate specification, procurement and product identification.

IP40 Protection and Enclosure Integration

The ABB PTBB1290 is intended to provide a blind closure for the top or bottom of a compatible System Pro E Power switchboard. In a modular electrical enclosure, these closure panels form part of the overall protective barrier around circuit breakers, busbars, distribution equipment and other installed components.

The IP40 designation refers to the ingress protection classification defined by IEC 60529. The first digit, 4, indicates protection against access to hazardous parts with a wire and against solid foreign objects measuring 1 mm or greater. The second digit, 0, indicates that the classification does not provide a rated level of protection against water ingress.

For this reason, the PTBB1290 is most appropriately considered for compatible indoor switchboard installations where the specified environmental conditions are consistent with an IP40 enclosure arrangement. The protection rating of the completed switchboard must be assessed as a whole and cannot be determined from the top/bottom panel alone.

The panel's 1250 mm nominal width and 900 mm nominal depth are important selection parameters when configuring the enclosure structure. These values identify the intended cabinet size configuration and should not be interpreted as independently verified external measurements of the manufactured panel.

Because the PTBB1290 is a blind enclosure component, it is intended for positions where a solid closure is required rather than a dedicated cable-entry or ventilation arrangement. Any subsequent modification, drilling or cutting may affect the completed assembly's protective characteristics and should be evaluated against the applicable ABB installation requirements.

Typical Applications

  • ABB System Pro E Power modular low-voltage switchboards.
  • Industrial electrical power distribution cabinets.
  • Commercial building main and sub-distribution assemblies.
  • IP40 electrical enclosure construction.
  • Top closures for compatible switchboard structures.
  • Bottom closures for compatible electrical distribution cabinets.
  • Electrical control and industrial automation enclosures.
  • Manufacturing facility electrical distribution infrastructure.
  • Switchboard assembly, refurbishment and compatible replacement projects.

Technical Specifications

Product group System Pro E Power
Model / type PTBB1290
ABB order code 1STQ007131A0000
Manufacturer designation IP40 BLIND TOP/BOTTOM W=1250MM D=900MM
Product type Blind top/bottom enclosure panel
Product category Electrical enclosure and switchboard accessories
Nominal enclosure width 1250 mm
Nominal enclosure depth 900 mm
Protection configuration IP40
Solid foreign object protection Objects of 1 mm diameter and greater
Water ingress protection No rated water protection under IP40
Panel configuration Blind / solid closure
Mounting location Top or bottom
Compatible enclosure system ABB System Pro E Power
Primary application Low-voltage electrical distribution switchboards
Typical installation environment Compatible indoor electrical enclosures

Frequently Asked Questions

What is the ABB PTBB1290 1STQ007131A0000 used for?

The ABB PTBB1290 is an IP40 blind top/bottom enclosure panel designed to close the upper or lower section of compatible ABB System Pro E Power low-voltage electrical switchboards.

What dimensions does the ABB PTBB1290 support?

The PTBB1290 is specified for a 1250 mm nominal enclosure width and 900 mm nominal enclosure depth. These are the compatible cabinet configuration dimensions rather than independently confirmed external measurements of the panel itself.

What does the IP40 protection rating mean?

IP40 indicates protection against access to hazardous parts with a wire and against solid foreign objects measuring 1 mm or greater. It does not provide a rated level of water ingress protection. The completed enclosure must be correctly assembled to achieve its intended protection rating.

Can the ABB PTBB1290 be installed at both the top and bottom of a switchboard?

Yes. The ABB PTBB1290 is designated as a blind top/bottom panel for use in the corresponding positions of compatible System Pro E Power enclosure structures, subject to ABB's installation instructions.

Which ABB enclosure system is compatible with the PTBB1290?

The PTBB1290 belongs to the ABB System Pro E Power product group and is intended for compatible switchboard structures with a 1250 mm nominal width and 900 mm nominal depth. Exact enclosure compatibility should be confirmed against the relevant ABB assembly documentation.

Trusted ABB Electrical Enclosure Engineering

ABB System Pro E Power accessories support the construction of coordinated, modular and maintainable low-voltage electrical switchboards. The PTBB1290 IP40 blind top/bottom panel provides a dedicated enclosure closure solution for compatible 1250 mm wide and 900 mm deep cabinet configurations, helping electrical panel builders achieve consistent installation and enclosure protection.