Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB 1STQ007122B0000 is a System pro E power installation kit for two compatible XT5 three-pole or four-pole circuit breakers in a 400 A equipment configuration, designed for horizontal integration into 800 mm-wide low-voltage switchgear assemblies.
£582.19
The ABB 1STQ007122B0000 is a dedicated dual XT5 circuit breaker installation kit designed for integration into ABB System pro E power low-voltage switchgear assemblies. Identified by ABB as 2 XT5 KIT 3-4P WITHD. I 400A HOR.W=800, this accessory is intended for an arrangement incorporating two compatible ABB XT5 moulded-case circuit breakers in three-pole or four-pole configurations.
As part of the ABB System pro E power product group, the kit provides an application-specific installation solution for electrical panel builders, switchboard manufacturers and industrial power distribution specialists. Its dual-device designation makes it relevant to switchgear layouts where two compatible XT5 circuit breakers must be integrated into the same designated assembly arrangement.
The kit is specified for 400 A circuit breaker equipment configurations and a horizontal installation arrangement within an 800 mm-wide System pro E power assembly. The manufacturer's WITHD. I notation is retained as part of the product designation; the exact associated mechanism and component requirements should be confirmed against the applicable ABB installation documentation.
Low-voltage switchgear assemblies frequently incorporate multiple moulded-case circuit breakers to distribute and protect electrical circuits. Where two breakers must be accommodated within a designated panel arrangement, application-specific installation accessories help panel builders plan component positioning and maintain compatibility with the surrounding switchgear structure. Three-pole and four-pole configurations allow the selected circuit breakers to be matched to the requirements of the electrical distribution system.
The ABB 1STQ007122B0000 is identified for a two-device XT5 installation arrangement with 400 A equipment compatibility, horizontal positioning and an 800 mm assembly width. The kit is an installation accessory rather than a complete circuit breaker assembly. The actual protective ratings, switching functions, connection arrangements and any requirements associated with the WITHD. I designation depend on the compatible equipment and ABB assembly instructions selected for the installation.
| Product group | System pro E power |
|---|---|
| ABB order code | 1STQ007122B0000 |
| Manufacturer designation | 2 XT5 KIT 3-4P WITHD. I 400A HOR.W=800 |
| Product type | Dual circuit breaker installation kit |
| Compatible circuit breaker family | ABB XT5 |
| Circuit breaker arrangement | Two XT5 devices |
| Compatible pole configurations | 3P / 4P |
| Compatible equipment current designation | 400 A |
| Installation orientation | Horizontal |
| Assembly width designation | 800 mm |
| Manufacturer configuration notation | WITHD. I |
| Compatible switchgear system | ABB System pro E power |
| Application | Low-voltage electrical distribution and switchgear assemblies |
The ABB 1STQ007122B0000 is an installation kit for a designated arrangement of two compatible ABB XT5 moulded-case circuit breakers within System pro E power low-voltage switchgear assemblies.
Yes. The manufacturer designation specifies 3-4P, identifying compatibility with the designated three-pole and four-pole XT5 circuit breaker configurations. The exact compatible devices should be checked against the applicable ABB assembly documentation.
The 400 A designation identifies the compatible circuit breaker equipment range associated with this installation kit. It does not mean that the kit itself has an independent current rating or provides overcurrent protection.
The ABB 1STQ007122B0000 is designated for a horizontal installation arrangement within a compatible 800 mm-wide ABB System pro E power switchgear configuration.
The product is identified as a dual XT5 installation kit, not a complete two-breaker assembly. The inclusion of circuit breakers, connection components or other accessories should not be assumed; confirm the supplied contents and the meaning of the manufacturer's WITHD. I configuration notation before ordering.
ABB System pro E power installation accessories provide application-specific solutions for professional low-voltage switchgear construction. The 1STQ007122B0000 dual XT5 installation kit supports a designated two-breaker arrangement for compatible three-pole or four-pole, 400 A equipment configurations within an 800 mm-wide horizontal switchgear layout.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.