1STQ007118B0000 ABB System pro E power XT5 Withdrawable Motorised Installation Kit 3/4P 400A Horizontal W400

Why Choose the ABB 1STQ007118B0000 System pro E power XT5 Withdrawable Motorised Installation Kit?

The ABB 1STQ007118B0000 is a dedicated XT5 withdrawable motorised circuit breaker installation kit designed for compatible ABB System pro E power low-voltage switchboard assemblies. Specified for 3-pole and 4-pole ABB Tmax XT5 moulded case circuit breakers in the 400 A frame range, this kit supports a horizontal withdrawable installation arrangement within switchboard sections with a 400 mm nominal width.

As part of the ABB System pro E power modular switchboard range, the installation kit supports the mechanical integration of compatible XT5 circuit breakers configured for withdrawable mounting and motor-operated switching. Its manufacturer designation, XT5 KIT 3-4P WITHD.MOT.400A HORIZ.W=400, identifies the intended circuit breaker family, pole configurations, mounting execution, operating arrangement and switchboard section width.

The ABB 1STQ007118B0000 is particularly suitable for professional switchboard manufacturers, electrical contractors and industrial panel builders requiring a dedicated XT5 400 A withdrawable motorised mounting arrangement. Its defined compatibility supports coordinated equipment installation within ABB System pro E power distribution assemblies where maintainability, electrical switching control and efficient use of cabinet space are important design considerations.

Key Advantages

• Purpose-designed installation kit for ABB Tmax XT5 moulded case circuit breakers.
• Supports compatible 3-pole and 4-pole XT5 configurations.
• Specified for the 400 A XT5 frame range.
• Withdrawable mounting arrangement for compatible circuit breaker assemblies.
• Motor-operated configuration for electrically controlled XT5 switching applications.
• Horizontal installation orientation for the designated switchboard layout.
• Suitable for compatible 400 mm nominal width System pro E power sections.
• Supports maintainable circuit breaker installations using compatible withdrawable equipment.
• Helps coordinate circuit breaker mounting with the modular enclosure structure.
• Facilitates integration of motor-operated switching equipment into professional low-voltage distribution assemblies.

Key Features

• ABB System pro E power circuit breaker installation accessory.
• ABB order code 1STQ007118B0000.
• ABB Tmax XT5 circuit breaker compatibility.
• 3-pole and 4-pole installation configurations.
• 400 A XT5 frame designation.
• Withdrawable circuit breaker mounting type.
• Motor-operated installation arrangement.
• Horizontal mounting orientation.
• 400 mm nominal switchboard section width.
• Designed for compatible ABB System pro E power modular cabinet structures.
• Supports integration with appropriately selected withdrawable circuit breaker components.
• Suitable for professional electrical panel manufacturing and switchboard construction.
• Intended for installation in accordance with ABB circuit breaker and enclosure assembly instructions.

Reliable Withdrawable Motorised XT5 Integration for Low-Voltage Switchboards

ABB System pro E power is a modular low-voltage switchboard system developed for electrical distribution applications in industrial, commercial and infrastructure environments. Its coordinated range of cabinet structures, mounting kits and installation accessories enables switchboard manufacturers to integrate compatible switching and protection equipment into organised electrical assemblies.

The ABB 1STQ007118B0000 XT5 installation kit is specified for compatible ABB Tmax XT5 400 A circuit breakers in 3-pole and 4-pole configurations. Its withdrawable motor-operated arrangement is intended for horizontal installation within an ABB System pro E power switchboard section with a nominal width of 400 mm.

Withdrawable circuit breaker configurations are designed around compatible movable breaker assemblies and associated fixed connection arrangements. Depending on the complete equipment configuration, withdrawable construction can facilitate defined connected, isolated and maintenance positions without requiring permanent power conductors to be disconnected from the fixed portion of the installation.

This arrangement can support planned inspection, replacement and maintenance procedures in suitably designed electrical distribution systems. However, the available operating positions, interlocks and withdrawal procedures depend on the selected XT5 breaker and associated withdrawable equipment. The installation kit alone does not establish these functions.

The manufacturer's MOT designation identifies a motor-operated installation configuration. Compatible motor operators enable electrically initiated circuit breaker switching and may support remote control or automated distribution functions when integrated into an appropriately designed control system.

The 1STQ007118B0000 is an installation accessory rather than a complete motorised withdrawable circuit breaker assembly. The supplied manufacturer description does not establish that the circuit breaker, motor operator, withdrawable connection components or control accessories are included. The exact kit contents and any separately required equipment should be confirmed against ABB's applicable product and assembly documentation.

ABB Tmax XT5 moulded case circuit breakers are used in low-voltage electrical distribution systems for switching and circuit protection. Depending on the selected breaker and trip unit, XT5 devices may provide overload, short-circuit and additional protective functions. The installation kit itself does not independently provide electrical protection, motor operation or switching functionality.

Correct component selection is essential when assembling a withdrawable motor-operated installation. The selected XT5 circuit breaker, pole configuration, withdrawable equipment, motor operator and cabinet mounting accessories must be mutually compatible. Appropriate electrical clearances, mechanical support, interlocking arrangements, control wiring and safe isolation procedures must also be maintained.

Using dedicated ABB System pro E power installation accessories helps panel builders maintain consistent cabinet layouts and coordinate the integration of compatible XT5 circuit breakers. The completed switchboard's electrical ratings, protection characteristics, operating functions and enclosure protection level depend on the selected devices, associated components and overall assembly design.

Typical Applications

• ABB System pro E power low-voltage switchboard assemblies.
• Horizontal installation of compatible ABB Tmax XT5 withdrawable circuit breakers.
• Motor-operated XT5 400 A circuit breaker mounting arrangements.
• 3-pole and 4-pole XT5 withdrawable configurations.
• Compatible 400 mm wide electrical distribution cabinet sections.
• Industrial electrical power distribution switchboards.
• Commercial building main and sub-distribution assemblies.
• Electrical distribution systems incorporating remotely operated circuit breakers.
• Switchboard installations designed for planned circuit breaker withdrawal and maintenance.
• Professional switchboard manufacturing, electrical panel building and compatible cabinet refurbishment.