1STQ007118A0000 ABB PTBB6030 System pro E power IP40 Blind Top/Bottom Panel W600 D300

Why Choose the ABB PTBB6030 System pro E power IP40 Blind Top/Bottom Panel?

The ABB PTBB6030 (1STQ007118A0000) is a dedicated IP40 blind top/bottom enclosure panel designed for compatible ABB System pro E power low-voltage electrical switchboard assemblies. Specified for a 600 mm nominal enclosure width and 300 mm nominal depth, this accessory provides a closed panel arrangement for the upper or lower section of a matching electrical distribution cabinet.

As part of the ABB System pro E power modular switchboard range, the PTBB6030 supports the construction of electrical distribution enclosures requiring an IP40-designated protective configuration. Its blind panel design provides a closed surface without dedicated cable-entry or ventilation openings, helping complete the physical enclosure boundary and support the intended protection against solid-object ingress.

The ABB PTBB6030 is particularly suitable for electrical panel builders, switchboard manufacturers and industrial contractors constructing 600 mm wide × 300 mm deep System pro E power cabinet arrangements. Its dedicated top/bottom application supports professional low-voltage distribution installations where dimensional compatibility, enclosure protection and coordinated assembly are important.

Key Advantages

• Purpose-designed IP40 blind top/bottom panel for ABB System pro E power enclosures.
• IP40-designated configuration for compatible low-voltage switchboard assemblies.
• 600 mm nominal enclosure width for matching cabinet structures.
• 300 mm nominal enclosure depth for the specified installation arrangement.
• Blind panel design provides a closed enclosure surface without dedicated cable-entry openings.
• Supports protection against solid-object ingress when correctly incorporated into an IP40 enclosure.
• Helps maintain a coordinated protective boundary across modular switchboard components.
• Designed for integration with the ABB System pro E power modular enclosure system.
• Supports consistent cabinet construction using dedicated ABB enclosure accessories.
• Suitable for professional industrial and commercial electrical distribution installations.

Key Features

• ABB System pro E power enclosure accessory.
• ABB product designation PTBB6030.
• ABB order code 1STQ007118A0000.
• IP40 blind top/bottom panel configuration.
• 600 mm nominal cabinet width.
• 300 mm nominal cabinet depth.
• Designed for compatible upper or lower enclosure positions.
• Closed panel arrangement for designated cabinet openings.
• Supports IP4X solid-object ingress protection in a correctly assembled IP40 enclosure.
• Dedicated mechanical accessory for modular low-voltage switchboard construction.
• Suitable for professional electrical panel manufacturing and cabinet assembly.
• Intended for installation in accordance with ABB System pro E power assembly instructions.

Reliable IP40 Enclosure Protection for Low-Voltage Switchboards

ABB System pro E power is a modular low-voltage switchboard system developed for electrical distribution applications in industrial, commercial and infrastructure environments. Its coordinated range of cabinet structures, doors, panels and mounting accessories enables switchboard manufacturers to configure enclosures for different equipment layouts and installation requirements.

The ABB PTBB6030 IP40 blind top/bottom panel is specified for compatible 600 mm wide × 300 mm deep cabinet arrangements. By closing the designated upper or lower opening, the panel contributes to the physical enclosure boundary and helps eliminate an otherwise exposed opening in the cabinet structure.

Under the ingress protection classification system defined by IEC 60529, IP40 identifies protection against access and ingress by solid objects of 1 mm diameter and greater, with no specified protection against water ingress. The PTBB6030 is designated for IP40 arrangements, but the completed switchboard's protection rating depends on the entire enclosure construction and correct installation of all associated components.

The blind panel configuration is appropriate where a closed upper or lower cabinet surface is required rather than a dedicated cable-entry or ventilation opening. This makes it relevant to electrical distribution assemblies where the selected cabinet position does not require cables or ventilation to pass through the enclosure boundary.

Where cable access or ventilation is necessary, a suitable compatible ABB enclosure accessory should be selected. Unauthorised modifications to the blind panel may affect the intended protection and mechanical characteristics of the completed switchboard.

The specified 600 mm width and 300 mm depth identify the nominal cabinet configuration for which the PTBB6030 is intended. These values should not automatically be interpreted as the exact manufactured outside dimensions of the individual panel, which may differ according to the mounting and enclosure design.

Correct installation is essential for achieving the intended protective performance. The ABB PTBB6030 should be fitted using the mounting arrangements specified in the relevant System pro E power documentation. The panel does not independently establish the electrical ratings, environmental suitability or ingress protection classification of the finished switchboard.

Typical Applications

• ABB System pro E power low-voltage switchboard assemblies.
• IP40-designated top and bottom enclosure closure arrangements.
• Compatible 600 mm wide × 300 mm deep electrical distribution cabinets.
• Industrial electrical power distribution enclosures.
• Commercial building main and sub-distribution switchboards.
• Electrical control and distribution cabinets installed in suitable indoor environments.
• Modular electrical enclosure construction and assembly projects.
• Professional switchboard manufacturing and electrical panel building.
• Compatible enclosure maintenance, refurbishment and blind panel replacement.