Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ007112A0000 ABB PTBB4020 System pro E Power IP40 Blind Top/Bottom Panel W400 D200
ABB PTBB4020 is a System pro E power IP40 blind top or bottom enclosure panel designed for compatible low-voltage switchgear cabinets with a nominal width of 400 mm and depth of 200 mm.
£43.53
Why Choose the ABB PTBB4020 System pro E Power IP40 Blind Top/Bottom Panel?
The ABB PTBB4020 is an IP40 blind top/bottom panel designed for compatible ABB System pro E power low-voltage switchgear enclosures and electrical distribution cabinets. Specified for an enclosure arrangement measuring 400 mm wide × 200 mm deep, this component provides a dedicated closure solution for the top or bottom of compatible modular switchboard structures.
As part of the ABB System pro E power range, the PTBB4020 supports the construction of enclosed electrical distribution assemblies by covering designated top or bottom openings. Its blind-panel design provides a solid closure arrangement where an open cable entry or ventilation aperture is not required, helping maintain the intended enclosure configuration.
Identified by ABB order code 1STQ007112A0000, the PTBB4020 is specified with an IP40 protection designation and a 400 × 200 mm enclosure configuration. It is suitable for professional electrical panel builders, switchgear manufacturers and maintenance engineers requiring a compatible top or bottom closure component for ABB System pro E power installations.
Key Advantages
- IP40 blind top/bottom panel for compatible ABB System pro E power enclosures.
- Designed for 400 mm wide × 200 mm deep switchboard configurations.
- Suitable for installation at the top or bottom of compatible electrical cabinets.
- Provides a blind closure for designated enclosure openings.
- Supports the intended IP40 enclosure protection arrangement when correctly installed within a compatible assembly.
- Helps create an organised and enclosed switchboard structure.
- Suitable for new panel construction, maintenance and refurbishment.
- Genuine ABB accessory identified by order code 1STQ007112A0000.
Key Features
- ABB PTBB4020 blind enclosure panel.
- System pro E power product series.
- IP40 protection designation.
- Blind top/bottom closure configuration.
- 400 mm nominal enclosure width.
- 200 mm nominal enclosure depth.
- Designed for compatible modular low-voltage switchgear structures.
- Provides a closure solution without a designated cable-entry opening.
- Suitable for compatible industrial and commercial electrical distribution enclosures.
- Manufacturer order code 1STQ007112A0000.
Technical Specifications
- Manufacturer: ABB
- Series: System pro E power
- Model: PTBB4020
- ABB order code: 1STQ007112A0000
- Product type: Blind top/bottom enclosure panel
- Protection designation: IP40
- Panel configuration: Blind
- Installation position: Top / bottom
- Nominal enclosure width: 400 mm
- Nominal enclosure depth: 200 mm
- Nominal enclosure configuration (W × D): 400 × 200 mm
- Product group: System Pro E Power
- Application: Low-voltage switchgear enclosure closure
- System compatibility: ABB System pro E power
- Component classification: Switchgear enclosure top/bottom accessory
IP40 Enclosure Closure for Modular Electrical Distribution Systems
Top and bottom closure panels are important components in the construction of modular electrical switchboards. They close designated enclosure openings and contribute to the intended physical barrier between internal electrical equipment and the surrounding installation environment.
The ABB PTBB4020 is specifically designed as an IP40 blind top/bottom panel for a 400 × 200 mm enclosure arrangement. The blind design is suitable where the specified cabinet position requires a closed panel rather than an opening for cable entry or another accessory.
Under the IP classification system, IP40 indicates protection against access by solid objects of at least 1 mm in diameter, with no rated protection against water ingress. The protection level of a completed switchboard depends on the enclosure design, installed components and correct assembly.
The ABB System pro E power platform provides a coordinated range of modular enclosure structures, closure panels, plinth accessories and internal electrical distribution components. Using the correct top or bottom panel helps panel builders maintain consistency across compatible switchboard configurations.
The PTBB4020 is an enclosure accessory rather than a complete electrical cabinet. Its suitability for a particular installation should be verified against the relevant ABB System pro E power assembly instructions, including mounting arrangements and any additional components required to achieve the intended enclosure protection.
Typical Applications
- ABB System pro E power low-voltage switchgear enclosures.
- Blind top-panel closure for compatible electrical distribution cabinets.
- Blind bottom-panel closure for compatible switchboard structures.
- IP40-designated enclosure configurations.
- Industrial main electrical distribution boards.
- Commercial building electrical distribution cabinets.
- Professional switchboard manufacturing and electrical panel building.
- Maintenance and refurbishment of compatible ABB enclosure panels.
Frequently Asked Questions
What is the ABB PTBB4020 used for?
The ABB PTBB4020 is an IP40 blind top/bottom panel designed to close designated openings in compatible ABB System pro E power low-voltage switchgear enclosures.
What dimensions does the ABB PTBB4020 support?
The PTBB4020 is specified for a nominal enclosure configuration measuring 400 mm wide × 200 mm deep.
What does IP40 mean for the ABB PTBB4020?
IP40 indicates protection against solid objects of at least 1 mm in diameter, without a water-ingress protection rating. The completed enclosure must be correctly assembled to achieve its intended protection classification.
Can the ABB PTBB4020 be installed at the top or bottom of a switchboard?
Yes. The PTBB4020 is specifically identified as a blind top/bottom panel. The appropriate installation position depends on the compatible ABB System pro E power enclosure configuration.
What is the ABB order code for the PTBB4020?
The manufacturer's order code is 1STQ007112A0000, identifying the ABB PTBB4020 IP40 blind top/bottom panel for a 400 mm wide and 200 mm deep enclosure arrangement.
Trusted ABB Components for Professional Switchboard Enclosures
ABB System pro E power enclosure accessories support the modular construction and protection of industrial and commercial low-voltage electrical distribution switchboards. The ABB PTBB4020 provides a dedicated IP40 blind top/bottom closure solution for compatible 400 × 200 mm enclosure configurations, supporting organised and professionally assembled electrical distribution systems.
