Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ007107A0000 ABB PTBB3020 IP40 Blind Top/Bottom Panel 300 x 200 mm System pro E Power
ABB PTBB3020 blind top/bottom panel, order code 1STQ007107A0000, is a 300 x 200 mm pickled sheet steel enclosure accessory for compatible IP40 System pro E Power low-voltage distribution switchboards.
£30.78
Why Choose the ABB PTBB3020 IP40 Blind Top/Bottom Panel?
The ABB PTBB3020, manufacturer order code 1STQ007107A0000, is an IP40 blind top/bottom enclosure panel designed for compatible ABB System pro E Power modular low-voltage switchboards. With nominal dimensions of 300 mm wide × 200 mm deep, this enclosure accessory provides a solid covering solution for the upper or lower sections of appropriately configured electrical distribution cabinets.
As part of the ABB System pro E Power enclosure accessory range, the PTBB3020 supports modular switchboard construction by providing a dedicated blind panel for compatible top and bottom enclosure openings. Its solid configuration helps complete the protective enclosure boundary, limiting access to internal electrical equipment and reducing the entry of solid foreign objects when correctly installed.
The IP40 protection classification makes the PTBB3020 suitable for compatible indoor electrical distribution assemblies requiring protection against solid objects of 1 mm diameter and greater. Its 300 mm width and 200 mm depth enable integration into corresponding System pro E Power structures, supporting organised and professional switchboard assembly.
Key Advantages
- Designed specifically for ABB System pro E Power modular switchboards.
- IP40 protection classification for compatible completed enclosure assemblies.
- 300 mm width × 200 mm depth for matching enclosure configurations.
- Blind panel construction provides solid coverage without intentional cable entry openings.
- Suitable for compatible top or bottom enclosure positions.
- Helps protect enclosed equipment against accidental contact and solid foreign object ingress.
- Supports coordinated modular switchboard construction and enclosure completion.
- Suitable for industrial and commercial low-voltage electrical distribution installations.
Key Features
- ABB System pro E Power modular switchboard accessory.
- PTBB3020 manufacturer model designation.
- Blind top/bottom enclosure panel.
- IP40 intended protection classification.
- 300 mm nominal width.
- 200 mm nominal depth.
- Solid panel configuration without intentional ventilation or cable entry openings.
- Designed for compatible upper or lower enclosure mounting positions.
- Supports enclosure integrity and internal equipment separation.
- Suitable for modular low-voltage power distribution cabinets.
- Manufacturer order code 1STQ007107A0000.
Technical Specifications
- Manufacturer: ABB
- Series: System pro E Power
- Model: PTBB3020
- ABB order code: 1STQ007107A0000
- Product type: Blind top/bottom enclosure panel
- Product category: Switchboard Enclosure Accessories
- Protection classification: IP40
- Nominal width: 300 mm
- Nominal depth: 200 mm
- Panel configuration: Blind / solid
- Installation position: Top or bottom of compatible enclosure
- Compatible enclosure system: ABB System pro E Power
- Protection against solid objects: IP4X, objects of 1 mm diameter and greater
- Water ingress protection: IPX0, no rated water protection
- Application: Low-voltage electrical distribution switchboards
Reliable Top and Bottom Enclosure Protection for Modular Switchboards
The ABB PTBB3020 provides a solid covering component for compatible System pro E Power switchboard top and bottom openings. Blind enclosure panels are used to close unused openings and complete the protective boundary around internal electrical equipment. Correctly installed panels help restrict access to hazardous parts and contribute to the overall enclosure protection of the finished switchboard assembly.
The IP40 classification provides protection against solid foreign objects of 1 mm diameter and greater, but it does not provide rated protection against water ingress. The protection achieved by the complete electrical switchboard depends on the correct combination of enclosure frames, doors, side panels, top and bottom panels, fixing arrangements and any other required components. The PTBB3020 must be matched to the specified 300 mm × 200 mm enclosure configuration.
Typical Applications
- ABB System pro E Power modular low-voltage switchboards.
- Top enclosure opening closure in electrical distribution cabinets.
- Bottom enclosure opening closure in compatible switchboard structures.
- Industrial main electrical distribution boards.
- Commercial building power distribution assemblies.
- Electrical switchgear and controlgear enclosures.
- Modular switchboard manufacturing and panel building.
- Compatible enclosure refurbishment and replacement panel installations.
Frequently Asked Questions
What is the ABB PTBB3020 used for?
The ABB PTBB3020 is an IP40 blind top/bottom panel designed to close compatible upper or lower openings in ABB System pro E Power modular electrical switchboard enclosures.
What are the dimensions of the ABB PTBB3020?
The PTBB3020 is specified for a nominal enclosure width of 300 mm and depth of 200 mm.
What is the protection rating of the ABB PTBB3020?
The PTBB3020 is specified for IP40 enclosure applications, providing protection against solid foreign objects of 1 mm diameter and greater when correctly installed as part of a suitable enclosure assembly.
Which ABB enclosure system is compatible with the PTBB3020?
The PTBB3020 belongs to the ABB System pro E Power modular switchboard range and is designed for appropriately dimensioned enclosure structures.
Can the ABB PTBB3020 be installed at the top or bottom of a switchboard?
Yes. The PTBB3020 is designated as a top/bottom blind panel for compatible System pro E Power enclosure arrangements.
Does the ABB PTBB3020 have cable entry openings?
The PTBB3020 is a blind panel, meaning it provides a solid covering rather than a pre-opened cable entry arrangement. Where cable entry is required, the appropriate enclosure accessories must be selected.
Is the ABB PTBB3020 suitable for outdoor installations?
The specified IP40 rating does not provide water ingress protection. Outdoor installations require a suitably protected complete enclosure, so the PTBB3020 should not be treated as a weatherproof panel.
Does the ABB PTBB3020 provide IP40 protection by itself?
No. The panel is one component of an enclosure assembly. The final IP40 protection classification depends on the complete switchboard configuration and correct installation of all associated enclosure components.
What is the ABB order code for the PTBB3020?
The manufacturer order code is 1STQ007107A0000, corresponding to the PTBB3020 IP40 blind top/bottom panel.
Trusted by Electrical Panel Builders and Switchboard Engineers
ABB System pro E Power enclosure accessories support professional modular low-voltage electrical distribution installations. The ABB PTBB3020 IP40 blind top/bottom panel, order code 1STQ007107A0000, provides a coordinated 300 mm × 200 mm enclosure covering solution for compatible switchboard structures, helping electrical contractors, panel builders and switchboard manufacturers create organised and protected electrical distribution assemblies.
