Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ007100B0000 ABB System pro E power XT5 Plug-In Motorised Installation Kit 3/4P 400A Horizontal W600
ABB 1STQ007100B0000 System pro E power horizontal plug-in motor-operated installation kit for compatible 3-pole and 4-pole Tmax XT5 400 A moulded case circuit breaker configurations in 600 mm wide switchboard sections.
£226.04
Why Choose the ABB 1STQ007100B0000 System pro E power XT5 Plug-In Motorised Installation Kit?
The ABB 1STQ007100B0000 is a dedicated XT5 plug-in motorised circuit breaker installation kit designed for compatible ABB System pro E power low-voltage switchboard assemblies. Specified for 3-pole and 4-pole ABB Tmax XT5 moulded case circuit breakers in the 400 A frame range, this kit supports a horizontal plug-in mounting arrangement within switchboard sections with a 600 mm nominal width.
As part of the ABB System pro E power modular switchboard range, this installation kit supports the integration of compatible XT5 circuit breakers configured for motor-operated switching applications. Its specified plug-in mounting type and MOT motor-operated arrangement make it suitable for electrical distribution systems where compatible motorised circuit breaker equipment is required.
The ABB 1STQ007100B0000 combines support for 3-pole and 4-pole XT5 400 A configurations, horizontal installation and a dedicated motor-operated mounting arrangement. It provides professional switchboard manufacturers, electrical contractors and industrial panel builders with a purpose-selected installation accessory for compatible 600 mm wide System pro E power cabinet sections.
Key Advantages
- Purpose-designed installation kit for ABB Tmax XT5 moulded case circuit breakers.
- Supports compatible 3-pole and 4-pole XT5 configurations.
- Specified for the 400 A XT5 frame range.
- Plug-in mounting arrangement for compatible circuit breaker assemblies.
- MOT-designated configuration for motor-operated XT5 installations.
- Horizontal installation orientation for the designated switchboard layout.
- Suitable for compatible 600 mm nominal width System pro E power sections.
- Helps coordinate circuit breaker mounting with the modular enclosure structure.
- Supports professional integration of electrically operated switching equipment into low-voltage distribution assemblies.
Key Features
- ABB System pro E power circuit breaker installation accessory.
- ABB order code 1STQ007100B0000.
- ABB Tmax XT5 circuit breaker compatibility.
- 3-pole and 4-pole installation configurations.
- 400 A XT5 frame designation.
- Plug-in circuit breaker mounting type.
- Motor-operated (MOT) installation arrangement.
- Horizontal mounting orientation.
- 600 mm nominal switchboard section width.
- Designed for integration with compatible ABB System pro E power cabinet components.
- Suitable for professional electrical panel manufacturing and switchboard construction.
- Intended for installation in accordance with ABB circuit breaker and enclosure assembly instructions.
Reliable Motorised XT5 Plug-In Integration for Low-Voltage Switchboards
ABB System pro E power is a modular low-voltage switchboard system developed for electrical distribution applications in industrial, commercial and infrastructure environments. Its coordinated range of cabinet structures, mounting kits and installation accessories allows switchboard manufacturers to integrate compatible switching and protection equipment into organised electrical assemblies.
The ABB 1STQ007100B0000 XT5 installation kit is specified for compatible ABB Tmax XT5 400 A circuit breakers in 3-pole and 4-pole configurations. Its horizontal plug-in arrangement is intended for installation within an ABB System pro E power switchboard section with a nominal width of 600 mm.
A plug-in circuit breaker configuration uses compatible plug-in connection components to connect the breaker to its designated mounting arrangement. Compared with conventional fixed-terminal installations, this arrangement can facilitate planned breaker replacement or maintenance without dismantling permanent power conductors in the same way. The exact installation and removal procedure depends on the selected breaker and associated connection equipment.
The manufacturer's MOT designation identifies a motor-operated installation arrangement. Compatible motor operators enable electrically initiated circuit breaker switching operations and can support remote switching or automated control functions when integrated into a suitable electrical control system.
The 1STQ007100B0000 is an installation kit rather than a complete motorised circuit breaker assembly. The supplied description does not establish that the circuit breaker, motor operator, plug-in connection components or associated control equipment are included. These items must be checked against the applicable ABB kit documentation and selected separately where required.
ABB Tmax XT5 moulded case circuit breakers are used in low-voltage electrical distribution systems for switching and circuit protection. Depending on the selected breaker and trip unit, XT5 devices may provide overload, short-circuit and additional protective functions. The installation kit itself does not independently provide electrical protection, motor operation or switching functionality.
Correct component selection is essential when assembling a motor-operated plug-in installation. The selected XT5 breaker, pole configuration, plug-in connection arrangement, motor operator and cabinet mounting components must be mutually compatible. Appropriate electrical clearances, control wiring arrangements, accessibility and isolation procedures must also be maintained.
Using dedicated ABB System pro E power installation accessories helps panel builders maintain consistent cabinet layouts and coordinate the mechanical integration of compatible XT5 circuit breakers. The completed switchboard's electrical ratings, operating characteristics and enclosure protection level depend on the selected devices, associated components and overall assembly design.
Typical Applications
- ABB System pro E power low-voltage switchboard assemblies.
- Horizontal installation of compatible ABB Tmax XT5 plug-in circuit breakers.
- Motor-operated XT5 400 A circuit breaker mounting arrangements.
- 3-pole and 4-pole XT5 plug-in configurations.
- Compatible 600 mm wide electrical distribution cabinet sections.
- Industrial electrical power distribution switchboards.
- Commercial building main and sub-distribution assemblies.
- Electrical distribution systems incorporating remotely operated switching equipment.
- Professional switchboard manufacturing, electrical panel building and compatible cabinet refurbishment.
Technical Specifications
| Product range | System pro E power |
|---|---|
| ABB order code | 1STQ007100B0000 |
| Model / part number | 1STQ007100B0000 |
| Manufacturer description | XT5 KIT 3-4P PLUG IN MOT.400A HOR.W=600 |
| Product type | Circuit breaker installation kit |
| Compatible circuit breaker family | ABB Tmax XT5 |
| Compatible frame designation | XT5 400 |
| Specified current frame | 400 A |
| Supported pole configurations | 3-pole / 4-pole |
| Circuit breaker mounting type | Plug-in |
| Installation orientation | Horizontal |
| Operating arrangement designation | MOT (motor-operated) |
| Nominal switchboard section width | 600 mm |
| Compatible enclosure system | ABB System pro E power |
| Associated equipment type | Moulded case circuit breaker (MCCB) |
| Component function | Installation of compatible motor-operated XT5 plug-in circuit breaker arrangements |
| Application | Low-voltage electrical distribution switchboards |
| Component category | Circuit breaker mounting and installation accessories |
Frequently Asked Questions
What is the ABB 1STQ007100B0000 used for?
The ABB 1STQ007100B0000 is an installation kit for compatible ABB Tmax XT5 moulded case circuit breakers. It is specified for 3-pole and 4-pole, 400 A plug-in motor-operated configurations with horizontal mounting in ABB System pro E power switchboard assemblies.
Which ABB XT5 circuit breaker frame is supported?
The kit is specified for the ABB Tmax XT5 400 A frame. Compatibility with the selected circuit breaker, trip unit, plug-in connection arrangement and motor operator should be confirmed against the applicable ABB installation documentation.
Does the ABB 1STQ007100B0000 support both 3-pole and 4-pole circuit breakers?
Yes. The manufacturer's description specifies compatibility with 3-pole and 4-pole ABB Tmax XT5 circuit breaker configurations, subject to the designated 400 A plug-in motor-operated installation arrangement.
What does MOT mean in the ABB 1STQ007100B0000 product description?
MOT identifies the motor-operated installation configuration. The kit is intended for a compatible XT5 plug-in circuit breaker arrangement using motor operation, but the manufacturer description does not establish that the motor operator or circuit breaker is included.
What cabinet width and mounting orientation are specified for this XT5 installation kit?
The kit is intended for a compatible 600 mm nominal width ABB System pro E power switchboard section with a horizontal plug-in circuit breaker mounting arrangement. It should not be substituted for a fixed or withdrawable installation kit without confirming compatibility.
Trusted by Professional Switchboard Builders
ABB System pro E power installation accessories support electrical panel builders, switchboard manufacturers and industrial electrical contractors in integrating compatible Tmax XT circuit breakers and motor-operated switching arrangements into coordinated low-voltage distribution assemblies using dedicated modular mounting solutions.
