Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ007099B0000 ABB System pro E Power XT5 3/4P Plug-In Motorised 400A Horizontal Installation Kit W400
ABB 1STQ007099B0000 is a System pro E Power installation kit for compatible three-pole or four-pole plug-in motorised Tmax XT5 circuit breakers in a 400 A configuration, designed for horizontal installation in a 400 mm wide switchboard.
£210.63
Why Choose the ABB XT5 3/4-Pole Plug-In Motorised Circuit Breaker Installation Kit?
The ABB 1STQ007099B0000 is a dedicated Tmax XT5 circuit breaker installation kit from the ABB System pro E Power modular low-voltage switchboard accessory range. Identified by the manufacturer as XT5 KIT 3-4P PLUG IN MOT.400A HOR.W=400, this kit is designed for compatible three-pole or four-pole, plug-in, motorised ABB Tmax XT5 circuit breaker arrangements within electrical distribution switchboards.
The kit is specified for a 400 A equipment configuration, horizontal installation and a 400 mm wide switchboard arrangement. Its designated plug-in mounting configuration distinguishes it from fixed-mounted and withdrawable circuit breaker installation kits, helping panel builders select the appropriate mechanical components for the intended equipment layout.
Developed for integration into the ABB System pro E Power platform, the ABB 1STQ007099B0000 supports the installation of compatible motor-operated XT5 circuit breaker assemblies. It is a mechanical installation accessory rather than a complete circuit breaker or motor operating mechanism, making correct selection of the associated electrical equipment essential.
Key Advantages
- Genuine ABB accessory: Designed for the System pro E Power modular low-voltage switchboard platform.
- Tmax XT5 compatibility: Intended for the specified ABB XT5 circuit breaker installation arrangement.
- Three-pole and four-pole options: Supports compatible 3P and 4P equipment configurations.
- Plug-in mounting: Specifically identified for plug-in rather than fixed-mounted circuit breaker arrangements.
- Motorised configuration: Designed for compatible XT5 equipment incorporating a motor operating mechanism.
- 400 A specification: Matches the manufacturer's designated 400 A equipment configuration.
- Horizontal installation: Intended for the specified horizontal circuit breaker arrangement.
- 400 mm switchboard width: Suited to the corresponding System pro E Power cabinet configuration.
- Coordinated mechanical integration: Helps align circuit breaker mounting with the selected modular switchboard layout.
- Precise product identification: ABB order code 1STQ007099B0000 simplifies specification, ordering and maintenance planning.
Key Features
- Manufacturer: ABB.
- Product series: System pro E Power.
- ABB manufacturer order code: 1STQ007099B0000.
- Manufacturer description: XT5 KIT 3-4P PLUG IN MOT.400A HOR.W=400.
- Product type: Circuit breaker installation kit.
- Compatible circuit breaker family: ABB Tmax XT5.
- Pole configurations: 3P and 4P.
- Circuit breaker mounting: Plug-in.
- Operating mechanism arrangement: Motorised.
- Specified equipment current configuration: 400 A.
- Installation orientation: Horizontal.
- Specified switchboard width: 400 mm.
- Compatible enclosure platform: ABB System pro E Power.
- Primary function: Mechanical integration of compatible plug-in motorised XT5 circuit breaker equipment.
Horizontal Motorised Plug-In XT5 Integration in System pro E Power Switchboards
The ABB System pro E Power platform provides coordinated enclosure structures, mounting components and equipment installation accessories for constructing modular low-voltage electrical distribution switchboards. Dedicated circuit breaker kits allow panel builders to select mechanical installation components that correspond to the required equipment type, mounting configuration and switchboard dimensions.
The ABB 1STQ007099B0000 is specifically designated for three-pole or four-pole ABB Tmax XT5 circuit breakers with plug-in mounting and a compatible motorised operating arrangement. Its manufacturer specification identifies a 400 A configuration, horizontal orientation and a 400 mm wide switchboard installation.
Plug-in circuit breaker arrangements use compatible connection and mounting components that permit the circuit breaker to be separated from its installed base in accordance with the manufacturer's procedures. A motor operating mechanism can enable electrically commanded operation when the appropriate XT5 breaker, motor operator and control accessories are fitted. The installation kit itself does not provide circuit protection, remote operation or electrical switching.
Correct integration requires verification of the exact XT5 circuit breaker version, three-pole or four-pole arrangement, plug-in connection system, motor operator and corresponding System pro E Power cabinet configuration. The completed assembly's electrical ratings, short-circuit withstand capability, temperature-rise performance and applicable compliance requirements must be established from the installed equipment and verified switchboard design.
Typical Applications
- ABB System pro E Power modular low-voltage switchboards.
- Compatible ABB Tmax XT5 400 A circuit breaker installations.
- Three-pole motorised plug-in XT5 arrangements.
- Four-pole motorised plug-in XT5 arrangements.
- Horizontal circuit breaker installation configurations.
- Switchboard installations with a specified width of 400 mm.
- Industrial electrical power distribution switchboards.
- Commercial building electrical distribution assemblies.
- Switchboards incorporating compatible electrically operated circuit breakers.
- Electrical panel building and switchboard manufacturing.
- Modular distribution projects requiring coordinated ABB circuit breaker mounting accessories.
Technical Specifications
| Brand | ABB |
|---|---|
| Manufacturer order code | 1STQ007099B0000 |
| SKU / MPN | 1STQ007099B0000 |
| Product description | XT5 KIT 3-4P PLUG IN MOT.400A HOR.W=400 |
| Product family | System pro E Power |
| ABB product group | System Pro E Power |
| Product category | Circuit breaker mounting and installation accessories |
| Component type | XT5 installation kit |
| Compatible circuit breaker series | ABB Tmax XT5 |
| Number of poles | 3 or 4 |
| Mounting configuration | Plug-in |
| Operating mechanism configuration | Motorised |
| Specified equipment current | 400 A |
| Installation orientation | Horizontal |
| Specified switchboard width | 400 mm |
| Compatible switchboard system | ABB System pro E Power |
| Installation type | Modular low-voltage switchboard equipment installation |
| Component function | Mechanical installation of compatible motorised plug-in XT5 circuit breaker arrangements |
Frequently Asked Questions
What is the ABB 1STQ007099B0000 used for?
The ABB 1STQ007099B0000 is an installation kit for compatible three-pole or four-pole, plug-in, motorised ABB Tmax XT5 circuit breaker arrangements within System pro E Power modular low-voltage switchboards.
Which circuit breaker rating and pole configurations does this kit support?
The manufacturer specifies a 400 A XT5 equipment configuration with three-pole or four-pole plug-in mounting. Compatibility with the exact circuit breaker and motor operating mechanism should be confirmed against ABB installation documentation.
What installation orientation and switchboard width are required?
The ABB 1STQ007099B0000 is specified for horizontal installation within a compatible 400 mm wide System pro E Power switchboard configuration.
Does the ABB 1STQ007099B0000 provide motorised circuit breaker operation?
No. The product is a mechanical installation kit for a motorised XT5 arrangement. Actual motorised operation requires the appropriate circuit breaker, compatible motor operating mechanism and associated control equipment.
Does the ABB 1STQ007099B0000 include the XT5 circuit breaker and plug-in base?
The manufacturer identifies 1STQ007099B0000 as an XT5 installation kit rather than a complete circuit breaker assembly. The required XT5 circuit breaker, plug-in connection components, motor operator and other accessories should be specified separately unless their inclusion is explicitly confirmed for the supplied kit.
Trusted by Electrical Panel Builders Worldwide
ABB System pro E Power installation accessories support the coordinated integration of low-voltage circuit protection equipment into modular electrical distribution switchboards. The ABB 1STQ007099B0000 provides a dedicated installation kit for compatible three-pole or four-pole, plug-in, motorised Tmax XT5 circuit breaker arrangements in a 400 A configuration, with horizontal installation and a specified 400 mm switchboard width.
