Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ007098B0000 ABB System Pro E Power XT5 3 Pole Plug-In Motor-Operated Installation Kit 400 A Horizontal W800
ABB 1STQ007098B0000 System Pro E Power internal installation kit for a 3-pole, 400 A Tmax XT5 plug-in, motor-operated circuit breaker in a horizontal mounting arrangement designed for 800 mm wide low-voltage switchboards.
£256.96
Why Choose the ABB 1STQ007098B0000 System Pro E Power XT5 Installation Kit?
The ABB 1STQ007098B0000 is a dedicated internal circuit breaker installation kit designed for the ABB System Pro E Power modular low-voltage switchboard range. Identified by the manufacturer as XT5 KIT 3P PLUG IN MOT.400A HORIZ.W=800, this accessory is specifically intended for the installation of an ABB Tmax XT5 3-pole, plug-in, motor-operated moulded case circuit breaker (MCCB) in a horizontal mounting arrangement.
As part of the ABB System Pro E Power product group, the 1STQ007098B0000 provides a coordinated mechanical mounting solution for electrical panel builders, switchboard manufacturers and industrial electrical contractors. Its application-specific design supports the integration of compatible Tmax XT5 circuit breakers into professional electrical distribution assemblies, helping achieve organised equipment positioning and consistent switchboard construction.
Designed for a 400 A Tmax XT5 circuit breaker configuration and a nominal switchboard width of 800 mm, this installation kit supports a horizontal, plug-in, motor-operated arrangement. It is particularly suitable for industrial and commercial power distribution systems requiring compatible plug-in circuit breaker mounting and electrically operated switching functionality.
Key Advantages
- Purpose-designed installation kit for ABB Tmax XT5 circuit breakers.
- Compatible with the specified 3-pole MCCB configuration.
- Designed for plug-in circuit breaker installation.
- Supports motor-operated Tmax XT5 arrangements.
- 400 A compatible circuit breaker rating for industrial distribution applications.
- Horizontal mounting orientation for coordinated switchboard layouts.
- Designed for 800 mm nominal switchboard width.
- Integrates with the modular ABB System Pro E Power distribution system.
- Supports professional circuit breaker positioning and mechanical installation.
- Suitable for industrial and commercial low-voltage electrical distribution assemblies.
Key Features
- ABB System Pro E Power internal installation kit.
- Manufacturer order code: 1STQ007098B0000.
- Manufacturer designation: XT5 KIT 3P PLUG IN MOT.400A HORIZ.W=800.
- Designed for ABB Tmax XT5 moulded case circuit breakers.
- 3-pole circuit breaker compatibility.
- Plug-in mounting configuration.
- Designed for a motor-operated circuit breaker arrangement.
- 400 A compatible breaker rating.
- Horizontal installation orientation.
- 800 mm nominal switchboard width.
- Dedicated mechanical mounting solution for compatible System Pro E Power assemblies.
- Supports integration of plug-in circuit breaker equipment within electrical distribution panels.
- Suitable for professional switchboard manufacturing and installation.
- Manufacturer-specific accessory for the designated Tmax XT5 installation arrangement.
Technical Specifications
- Manufacturer: ABB
- Product group: System Pro E Power
- Series: System Pro E Power
- Model / type: 1STQ007098B0000
- Manufacturer order code: 1STQ007098B0000
- Manufacturer designation: XT5 KIT 3P PLUG IN MOT.400A HORIZ.W=800
- Product type: Internal circuit breaker installation kit
- Accessory category: Switchboard circuit breaker mounting accessories
- Compatible circuit breaker series: ABB Tmax XT5
- Compatible pole configuration: 3-pole
- Circuit breaker mounting version: Plug-in
- Operating arrangement: Motor-operated
- Compatible circuit breaker current rating: 400 A
- Installation orientation: Horizontal
- Nominal switchboard width: 800 mm
- Installation system: ABB System Pro E Power modular switchboards
- Primary function: Mechanical mounting and integration of a compatible XT5 circuit breaker
- Component classification: Mechanical switchboard installation accessory
- Application: Low-voltage electrical distribution assemblies
Reliable Circuit Breaker Integration for Industrial Switchboards
The ABB 1STQ007098B0000 installation kit is designed to support the mechanical integration of a compatible Tmax XT5 3-pole plug-in circuit breaker within the System Pro E Power switchboard platform. Its horizontal mounting configuration provides a dedicated installation arrangement for electrical distribution systems using motor-operated circuit breaker equipment.
Plug-in circuit breaker designs use a compatible connection base and associated electrical contacts to connect the breaker to the distribution system. This arrangement can simplify circuit breaker replacement and maintenance compared with permanently connected configurations, provided the equipment is correctly isolated and all manufacturer safety procedures are followed.
The motor-operated configuration allows a suitably equipped Tmax XT5 circuit breaker to be operated electrically through compatible motor operating accessories and control circuitry. This functionality can support automated switching arrangements, remote operation and integration with electrical distribution control systems when the necessary circuit breaker accessories and controls are installed.
The kit is specified for a 400 A breaker configuration within an 800 mm wide System Pro E Power switchboard. These specifications identify the intended installation arrangement and do not represent an independent current-carrying rating or the physical width of the installation kit itself.
The ABB 1STQ007098B0000 is a mechanical installation kit rather than a complete circuit breaker assembly. The Tmax XT5 circuit breaker, compatible plug-in base, motor operator, trip unit and any additional electrical accessories must be selected according to the intended installation and verified against the supplied kit contents. The electrical protection characteristics of the finished assembly depend on the selected circuit breaker and its protective equipment.
Typical Applications
- ABB System Pro E Power low-voltage distribution switchboards.
- ABB Tmax XT5 3-pole plug-in circuit breaker installations.
- Motor-operated circuit breaker mounting arrangements.
- Industrial electrical power distribution panels.
- Commercial building electrical infrastructure.
- Main and secondary electrical distribution boards.
- Electrical distribution systems incorporating remotely operated circuit breakers.
- Manufacturing facilities and industrial production environments.
- OEM switchboard manufacturing and professional electrical panel building.
- Electrical infrastructure upgrades and compatible switchboard refurbishment projects.
Frequently Asked Questions
What is the ABB 1STQ007098B0000 used for?
The ABB 1STQ007098B0000 is an internal installation kit designed for mounting a 3-pole, 400 A Tmax XT5 plug-in, motor-operated circuit breaker horizontally within an ABB System Pro E Power low-voltage switchboard.
Which circuit breaker is compatible with this installation kit?
The kit is specifically designated for an ABB Tmax XT5 moulded case circuit breaker in a 3-pole, plug-in, motor-operated, 400 A configuration.
What current rating is associated with the ABB 1STQ007098B0000?
The manufacturer designation specifies a 400 A compatible Tmax XT5 circuit breaker configuration. This is the breaker rating associated with the installation arrangement rather than a separate electrical rating of the mechanical kit.
Is this kit suitable for plug-in circuit breakers?
Yes. The 1STQ007098B0000 is specifically designed for a plug-in Tmax XT5 circuit breaker arrangement. The selected breaker and plug-in connection components must be compatible with the complete installation.
Does the kit support motor-operated circuit breakers?
Yes. The manufacturer designation identifies a motor-operated installation configuration. Compatible motor operating accessories and control equipment are required to provide electrical operation of the installed Tmax XT5 circuit breaker.
What mounting orientation does the ABB 1STQ007098B0000 use?
The kit is designed for horizontal circuit breaker installation within a compatible ABB System Pro E Power switchboard assembly.
What switchboard width is required for this installation kit?
The ABB 1STQ007098B0000 is specified for a nominal switchboard width of 800 mm within the System Pro E Power modular enclosure range.
Does the ABB 1STQ007098B0000 include the circuit breaker?
The product is identified as an installation kit rather than a complete circuit breaker assembly. The Tmax XT5 breaker and required plug-in, motor-operated and protective accessories should be selected separately unless explicitly included in the supplied kit contents.
Can this installation kit be used with a 4-pole circuit breaker?
The manufacturer designation specifies a 3-pole Tmax XT5 configuration. The 1STQ007098B0000 should therefore be selected for the specified 3-pole installation rather than assumed to support a 4-pole circuit breaker.
What is the ABB manufacturer order code for this product?
The official ABB manufacturer order code is 1STQ007098B0000, corresponding to the System Pro E Power installation kit designated XT5 KIT 3P PLUG IN MOT.400A HORIZ.W=800.
Trusted by Electrical Panel Builders Worldwide
ABB System Pro E Power installation accessories provide coordinated mechanical solutions for professional low-voltage switchboard construction. The ABB 1STQ007098B0000 supports the horizontal installation of a 3-pole, 400 A Tmax XT5 plug-in, motor-operated circuit breaker within compatible 800 mm wide switchboard structures, helping electrical panel builders deliver organised and dependable power distribution assemblies.
