Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ007094A0000 ABB PTBB8026 System pro E Power IP65 Blind Top/Bottom Panel W800 D200mm
ABB PTBB8026 (1STQ007094A0000) is an IP65 blind top/bottom enclosure panel designed for compatible System pro E Power modular low-voltage switchboard cabinets with a width of 800 mm and depth of 200 mm.
£89.99
Why Choose the ABB PTBB8026 IP65 Blind Top/Bottom Panel?
The ABB PTBB8026, manufacturer order code 1STQ007094A0000, is an IP65 blind top/bottom enclosure panel designed for the ABB System pro E Power modular low-voltage electrical distribution switchboard system. Identified by the manufacturer as IP65 BLIND TOP/BOTTOM W=800MM D=200MM, this accessory is specified for compatible switchboard configurations measuring 800 mm wide and 200 mm deep.
As part of ABB's System pro E Power enclosure accessory range, the PTBB8026 provides a blind panel configuration for closing a designated top or bottom opening in a compatible electrical cabinet. Its unperforated design is intended for installations where a predefined cable-entry or ventilation opening is not required at the selected enclosure position.
The IP65 designation identifies a protection configuration intended for dust-tight construction and protection against water jets when incorporated into a correctly assembled enclosure. The ABB PTBB8026 is an appropriate choice for professional switchboard manufacturers, electrical panel builders and industrial electrical contractors requiring a coordinated enclosure closure component for a 800 mm × 200 mm System pro E Power cabinet arrangement.
Key Advantages
- Genuine ABB accessory: Designed for the System pro E Power modular switchboard platform.
- IP65 configuration: Specified for compatible enclosure assemblies requiring IP65 ingress protection.
- Blind panel construction: Provides an unperforated enclosure closure without predefined cable-entry openings.
- 800 mm cabinet width: Matches the corresponding System pro E Power enclosure configuration.
- 200 mm cabinet depth: Designed for compatible switchboard structures of the specified depth.
- Top or bottom application: Identified for installation in designated upper or lower enclosure positions.
- Enclosure closure: Helps complete the cabinet structure and limit environmental exposure.
- Coordinated system integration: Intended for use with appropriately selected ABB framework, panel and sealing components.
- Modular construction: Supports organised electrical distribution cabinet assembly.
- Accurate product identification: ABB designation PTBB8026 and order code 1STQ007094A0000 simplify specification and procurement.
Key Features
- Manufacturer: ABB.
- Product designation: PTBB8026.
- ABB manufacturer order code: 1STQ007094A0000.
- Product series: System pro E Power.
- Manufacturer description: IP65 BLIND TOP/BOTTOM W=800MM D=200MM.
- Product type: Blind top/bottom enclosure panel.
- Specified ingress protection configuration: IP65.
- Compatible cabinet width: 800 mm.
- Compatible cabinet depth: 200 mm.
- Panel configuration: Blind, without predefined openings.
- Installation position: Top or bottom of a compatible enclosure.
- Compatible platform: ABB System pro E Power.
- Primary function: Closure of a designated switchboard enclosure opening.
- Application: Modular low-voltage electrical distribution cabinets.
IP65 Enclosure Protection and Modular Switchboard Integration
The ABB System pro E Power range provides coordinated structural components, enclosure panels and installation accessories for constructing modular low-voltage electrical distribution switchboards. Top and bottom panels form important elements of the enclosure structure, helping close cabinet openings and establish separation between internal electrical equipment and the surrounding environment.
The ABB PTBB8026 is specifically identified as an IP65 blind top/bottom panel for a 800 mm wide and 200 mm deep cabinet arrangement. Its blind configuration is appropriate for compatible installations where the selected top or bottom position does not require a predefined opening for cable entry or ventilation.
Under the IEC 60529 ingress protection classification, IP65 denotes protection against dust ingress and water jets. Achieving this level of protection in a completed switchboard depends on the entire enclosure assembly, including compatible panels, joints, seals, fasteners and any subsequently introduced openings. The PTBB8026's IP65 designation does not independently establish the ingress protection rating of every assembled cabinet.
The PTBB8026 is a mechanical enclosure accessory, not an electrical switching or circuit protection device. Correct installation requires matching the panel to the appropriate System pro E Power cabinet configuration and following the relevant ABB assembly instructions. Unapproved modifications, unsuitable sealing arrangements or incorrectly installed cable penetrations may compromise the completed enclosure's intended protection.
Typical Applications
- ABB System pro E Power modular switchboard enclosures.
- Compatible 800 mm wide and 200 mm deep electrical cabinets.
- Switchboard assemblies requiring an IP65 top or bottom panel configuration.
- Industrial low-voltage electrical distribution cabinets.
- Commercial building power distribution switchboards.
- Blind closure of compatible cabinet top openings.
- Blind closure of compatible cabinet bottom openings.
- Electrical panel building and switchboard manufacturing.
- Power distribution infrastructure and electrical plant rooms.
- Modular enclosure construction requiring coordinated ABB closing panels.
Technical Specifications
| Product reference | PTBB8026 |
|---|---|
| ABB order code | 1STQ007094A0000 |
| SKU / MPN | 1STQ007094A0000 |
| Product description | IP65 BLIND TOP/BOTTOM W=800MM D=200MM |
| Product series | System pro E Power |
| ABB product group | System Pro E Power |
| Product category | Switchboard enclosure panels and accessories |
| Component type | Blind top/bottom panel |
| Specified ingress protection configuration | IP65 |
| Compatible cabinet width | 800 mm |
| Compatible cabinet depth | 200 mm |
| Panel design | Blind / unperforated |
| Installation location | Top or bottom enclosure position |
| Compatible switchboard system | ABB System pro E Power |
| Installation type | Modular enclosure assembly |
| Component function | Enclosure opening closure |
| Intended application | Low-voltage electrical distribution switchboard construction |
Frequently Asked Questions
What is the ABB PTBB8026 used for?
The ABB PTBB8026 is an IP65 blind top/bottom panel designed to close a compatible enclosure opening within an ABB System pro E Power modular low-voltage electrical switchboard.
What are the specified dimensions of the ABB PTBB8026?
The ABB PTBB8026 is specified for a compatible switchboard cabinet configuration with a 800 mm width and 200 mm depth. These dimensions identify the intended enclosure arrangement.
What does IP65 mean for the ABB PTBB8026?
The IP65 designation identifies a protection configuration intended to provide dust-tight construction and protection against water jets. The completed switchboard must be correctly assembled using compatible components and appropriate sealing arrangements to achieve its specified ingress protection.
Can the ABB PTBB8026 be installed at the top or bottom of a switchboard?
Yes. ABB identifies the PTBB8026 as a blind top/bottom panel. Installation in either position must correspond to a compatible System pro E Power enclosure configuration and follow the applicable assembly instructions.
Does the ABB PTBB8026 include a complete switchboard enclosure?
No. The ABB PTBB8026 is a blind enclosure panel accessory rather than a complete electrical cabinet. Additional compatible System pro E Power framework components, panels and installation accessories are required to construct the finished switchboard.
Trusted by Electrical Panel Builders Worldwide
ABB System pro E Power enclosure accessories support the construction of coordinated modular low-voltage electrical distribution switchboards. The ABB PTBB8026 provides an IP65 blind top/bottom panel configuration for compatible 800 mm wide and 200 mm deep cabinets, helping professional panel builders select appropriately matched enclosure components for industrial and commercial electrical distribution installations.
