1STQ007093A0000 ABB PTBB7576 System pro E power IP65 Blind Top/Bottom Panel W750 D700

Why Choose the ABB PTBB7576 System pro E power IP65 Blind Top/Bottom Panel?

The ABB PTBB7576 (1STQ007093A0000) is a dedicated IP65 blind top/bottom enclosure panel designed for compatible ABB System pro E power low-voltage switchboard assemblies. Specified for a 750 mm nominal enclosure width and 700 mm nominal depth, this accessory provides a closed panel arrangement for the upper or lower section of a matching electrical distribution cabinet.

As part of the ABB System pro E power modular switchboard range, the PTBB7576 supports enclosure configurations requiring protection against dust ingress and water jets. Its blind panel design closes a designated cabinet opening without incorporating intentional cable-entry or ventilation apertures, helping maintain the protective enclosure boundary when correctly installed as part of a compatible IP65 assembly.

The ABB PTBB7576 is particularly suitable for electrical panel builders, switchboard manufacturers and industrial contractors constructing 750 mm wide × 700 mm deep System pro E power cabinet arrangements. Its dedicated top/bottom application supports professional low-voltage distribution installations where dimensional compatibility, enclosure protection and coordinated assembly are essential.

Key Advantages

• Purpose-designed IP65 blind top/bottom panel for ABB System pro E power enclosures.
• IP65-designated configuration for compatible protected switchboard assemblies.
• 750 mm nominal enclosure width for matching cabinet structures.
• 700 mm nominal enclosure depth for the specified top or bottom arrangement.
• Blind panel design provides a closed enclosure surface without dedicated cable-entry openings.
• Supports protection against dust ingress and water jets when correctly incorporated into an IP65 enclosure.
• Helps maintain a coordinated protective boundary across modular switchboard components.
• Designed for integration with the ABB System pro E power enclosure system.
• Suitable for industrial, commercial and infrastructure electrical distribution applications.

Key Features

• ABB System pro E power enclosure accessory.
• ABB product designation PTBB7576.
• ABB order code 1STQ007093A0000.
• IP65 blind top/bottom panel configuration.
• 750 mm nominal cabinet width.
• 700 mm nominal cabinet depth.
• Designed for compatible upper or lower enclosure positions.
• Closed panel arrangement for designated cabinet openings.
• Supports dust-tight and water-jet-resistant enclosure configurations when correctly installed.
• Dedicated mechanical component for modular low-voltage switchboard construction.
• Suitable for professional electrical panel manufacturing and cabinet assembly.
• Intended for installation in accordance with ABB System pro E power assembly instructions.

Reliable Enclosure Protection for Low-Voltage Switchboards

ABB System pro E power is a modular low-voltage switchboard system developed for electrical distribution applications in industrial, commercial and infrastructure environments. Its coordinated range of cabinet structures, doors, panels and mounting accessories enables switchboard manufacturers to configure enclosures for different equipment layouts and environmental protection requirements.

The ABB PTBB7576 IP65 blind top/bottom panel is specified for compatible 750 mm wide × 700 mm deep cabinet arrangements. By closing the designated top or bottom opening, the panel contributes to the physical enclosure boundary and helps eliminate an otherwise exposed opening in the cabinet structure.

Under the ingress protection classification system defined by IEC 60529, IP65 denotes a dust-tight enclosure and protection against water jets. The PTBB7576 is identified as an IP65 accessory, but the completed switchboard's protection rating depends on the overall enclosure configuration, including correctly selected seals, joints, doors, cable-entry systems and other associated components.

The blind configuration is appropriate where a closed upper or lower cabinet surface is required rather than a dedicated cable-entry or ventilation opening. Where cable access is necessary, a compatible ABB cable-entry component or an approved installation arrangement should be selected to preserve the intended enclosure protection.

For switchboard builders, selecting a dedicated panel for the specified cabinet dimensions helps maintain consistency across the modular assembly. The 750 mm width and 700 mm depth identify the intended enclosure configuration and should not automatically be interpreted as the exact manufactured outside dimensions of the individual panel.

Correct installation is essential for achieving the intended protective performance. The ABB PTBB7576 should be fitted using the mounting and sealing arrangements required by the applicable System pro E power documentation. The panel does not independently establish the protection rating, electrical performance or environmental suitability of the finished switchboard.

Typical Applications

• ABB System pro E power low-voltage switchboard assemblies.
• IP65-designated top and bottom enclosure closure arrangements.
• Compatible 750 mm wide × 700 mm deep electrical distribution cabinets.
• Industrial electrical power distribution enclosures.
• Commercial building main and sub-distribution switchboards.
• Electrical control and distribution installations requiring protected cabinet configurations.
• Modular electrical enclosure construction and assembly projects.
• Professional switchboard manufacturing and electrical panel building.
• Compatible enclosure maintenance, refurbishment and blind panel replacement.