Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ007092B0000 ABB System pro E power XT5 Plug-In RHD Installation Kit 3/4P 400A Horizontal W800
ABB 1STQ007092B0000 System pro E power horizontal plug-in installation kit for compatible 3-pole and 4-pole Tmax XT5 400 A moulded case circuit breakers with an RHD rotary-handle arrangement in 800 mm wide switchboard sections.
£261.18
Why Choose the ABB 1STQ007092B0000 System pro E power XT5 Plug-In Circuit Breaker Installation Kit?
The ABB 1STQ007092B0000 is a dedicated XT5 plug-in circuit breaker installation kit with RHD arrangement for compatible ABB System pro E power low-voltage switchboard assemblies. Designed for 3-pole and 4-pole ABB Tmax XT5 moulded case circuit breakers in the 400 A frame range, this kit supports a horizontal plug-in installation configuration within switchboard sections with a nominal width of 800 mm.
As part of the ABB System pro E power modular switchboard range, the installation kit provides a coordinated mounting solution for integrating compatible XT5 plug-in circuit breaker arrangements into electrical distribution cabinets. Its designated RHD configuration identifies an operating arrangement associated with the installation, allowing panel builders to select the appropriate mounting kit for the intended breaker and enclosure combination.
The ABB 1STQ007092B0000 is particularly suitable for professional switchboard manufacturers, electrical contractors and industrial panel builders requiring a dedicated XT5 400 A plug-in mounting arrangement for compatible 800 mm wide System pro E power sections. Its specified pole compatibility, horizontal orientation and RHD designation help simplify the selection of suitable installation accessories for modular low-voltage distribution assemblies.
Key Advantages
- Purpose-designed installation kit for ABB Tmax XT5 moulded case circuit breakers.
- Supports compatible 3-pole and 4-pole XT5 configurations.
- Specified for the 400 A XT5 frame range.
- Designed for plug-in circuit breaker installation within compatible switchboards.
- Horizontal mounting configuration for the designated enclosure arrangement.
- Supports the manufacturer's specified RHD operating arrangement.
- Suitable for compatible 800 mm nominal width System pro E power sections.
- Helps coordinate circuit breaker positioning, mounting and enclosure integration.
- Supports modular switchboard construction using dedicated ABB installation accessories.
Key Features
- ABB System pro E power circuit breaker installation accessory.
- ABB order code 1STQ007092B0000.
- ABB Tmax XT5 circuit breaker compatibility.
- 3-pole and 4-pole installation arrangements.
- 400 A XT5 frame designation.
- Plug-in circuit breaker mounting configuration.
- Horizontal installation orientation.
- RHD operating arrangement designation.
- 800 mm nominal switchboard section width.
- Designed for compatible ABB System pro E power modular enclosures.
- Suitable for professional low-voltage electrical distribution panel assembly.
- Intended for installation according to ABB's applicable circuit breaker and switchboard assembly instructions.
Reliable XT5 Plug-In Integration for Low-Voltage Switchboards
ABB System pro E power is a modular low-voltage switchboard system developed for electrical distribution applications in industrial, commercial and infrastructure environments. Its coordinated range of cabinet structures, mounting kits and installation accessories allows switchboard manufacturers to integrate compatible switching and protection equipment into organised electrical assemblies.
The ABB 1STQ007092B0000 XT5 installation kit is specifically designated for compatible ABB Tmax XT5 400 A circuit breakers in 3-pole or 4-pole configurations. Its plug-in mounting arrangement is intended for horizontal installation within an ABB System pro E power switchboard section with a nominal width of 800 mm.
Plug-in circuit breaker arrangements use a compatible connection system that allows the breaker to be installed and removed from its designated mounting arrangement without dismantling permanent power conductors in the same manner as a conventional fixed-terminal installation. This can support planned equipment replacement and maintenance procedures, subject to the complete breaker configuration and the manufacturer's safety instructions.
The manufacturer's RHD designation identifies the operating arrangement associated with this installation kit. ABB uses RHD terminology for rotary-handle operating configurations; however, the exact handle components, operating accessories and installation requirements must be checked against the relevant ABB documentation for this specific order code.
ABB Tmax XT5 moulded case circuit breakers are used in low-voltage electrical distribution systems for switching and circuit protection. Depending on the selected breaker and trip unit, XT5 devices may provide overload, short-circuit and additional protective functions. The 1STQ007092B0000 is an installation accessory and does not independently provide circuit protection or switching functionality.
Correct selection of the plug-in circuit breaker, associated connection components, operating arrangement and enclosure mounting accessories is essential. The complete installation must meet the applicable requirements for electrical clearances, mechanical support, accessibility and safe isolation. Plug-in construction does not make it safe to remove or install equipment while energised unless a specifically approved procedure and equipment arrangement permit the operation.
Using coordinated ABB System pro E power installation accessories helps panel builders maintain consistent cabinet layouts and integrate compatible XT5 circuit breakers into suitable modular distribution systems. The completed assembly's electrical ratings, protection characteristics and enclosure protection level depend on the selected circuit breaker, associated components and overall switchboard design.
Typical Applications
- ABB System pro E power low-voltage switchboard assemblies.
- Horizontal installation of compatible ABB Tmax XT5 plug-in circuit breakers.
- 3-pole and 4-pole XT5 400 A frame configurations.
- Plug-in circuit breaker installations with compatible RHD operating arrangements.
- Compatible 800 mm wide electrical distribution cabinet sections.
- Industrial electrical power distribution switchboards.
- Commercial building main and sub-distribution assemblies.
- Electrical distribution projects requiring compatible plug-in breaker mounting arrangements.
- Professional switchboard manufacturing, electrical panel building and compatible cabinet refurbishment.
Technical Specifications
| Product range | System pro E power |
|---|---|
| ABB order code | 1STQ007092B0000 |
| Model / part number | 1STQ007092B0000 |
| Manufacturer description | XT5 KIT 3-4P PLUG IN+RHD(400A)H.W=800 |
| Product type | Circuit breaker installation kit |
| Compatible circuit breaker family | ABB Tmax XT5 |
| Compatible frame designation | XT5 400 |
| Specified current frame | 400 A |
| Supported pole configurations | 3-pole / 4-pole |
| Circuit breaker mounting type | Plug-in |
| Installation orientation | Horizontal |
| Operating arrangement | RHD designation |
| Nominal switchboard section width | 800 mm |
| Compatible enclosure system | ABB System pro E power |
| Associated equipment type | Moulded case circuit breaker (MCCB) |
| Component function | Installation of compatible XT5 plug-in circuit breaker arrangements |
| Application | Low-voltage electrical distribution switchboards |
| Component category | Circuit breaker mounting and installation accessories |
Frequently Asked Questions
What is the ABB 1STQ007092B0000 used for?
The ABB 1STQ007092B0000 is an installation kit for compatible ABB Tmax XT5 moulded case circuit breakers. It is specified for 3-pole and 4-pole, 400 A plug-in configurations with an RHD operating arrangement in horizontally mounted System pro E power switchboard installations.
Which ABB XT5 circuit breaker frame is supported?
The kit is specified for the ABB Tmax XT5 400 A frame. Compatibility with an individual breaker, trip unit and plug-in connection arrangement should be confirmed against ABB's installation documentation.
Does the ABB 1STQ007092B0000 support both 3-pole and 4-pole circuit breakers?
Yes. The manufacturer's description specifies 3-pole and 4-pole compatibility for the designated XT5 400 A plug-in installation arrangement.
What does plug-in with RHD mean for this XT5 installation kit?
Plug-in identifies the circuit breaker's connection and mounting arrangement, while RHD identifies a rotary-handle operating configuration. The exact operating components and plug-in connection accessories required should be verified against the ABB technical documentation for order code 1STQ007092B0000.
What cabinet width and installation orientation are specified?
The kit is designed for a compatible 800 mm nominal width ABB System pro E power switchboard section with a horizontal plug-in circuit breaker installation arrangement. It is not identified as a fixed or withdrawable mounting kit.
Trusted by Professional Switchboard Builders
ABB System pro E power installation accessories support electrical panel builders, switchboard manufacturers and industrial electrical contractors in integrating compatible Tmax XT circuit breakers into coordinated low-voltage distribution assemblies using dedicated modular mounting solutions.
