Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PTBB7536 1STQ007091A0000 is an IP65 blind top/bottom panel made from pickled sheet steel, designed for 750 mm wide and 300 mm deep System Pro E Power electrical switchboard enclosures and supplied with a sealing gasket and fixing screws.
£130.60
The ABB PTBB7536 (1STQ007091A0000) is a durable IP65 blind top/bottom enclosure panel designed for ABB System Pro E Power low-voltage electrical switchboards and distribution cabinets. Manufactured from pickled sheet steel and supplied with an IP65 sealing gasket, this enclosure accessory provides a solid, protective closure for compatible electrical cabinet structures.
As part of the ABB System Pro E Power series, the PTBB7536 is developed for professional switchboard builders, electrical contractors and industrial panel manufacturers requiring reliable enclosure protection and modular installation flexibility. Its blind, unperforated construction helps protect internal electrical components against dust and water ingress when correctly installed as part of a complete IP65-rated assembly.
With nominal dimensions of 750 mm width and 300 mm depth, the ABB PTBB7536 is suitable for compatible System Pro E Power enclosure configurations. The panel can be used in either a top or bottom position, simplifying component selection and installation. Each article provides one panel, allowing installers to order the required quantity for their switchboard configuration.
The ABB PTBB7536 blind top/bottom panel is designed to close the upper or lower section of compatible System Pro E Power electrical enclosures. Its solid sheet steel construction provides a protective physical barrier, while the supplied sealing gasket supports the enclosure's intended ingress protection performance.
An IP65 protection rating indicates dust-tight protection and resistance to water jets under the relevant test conditions. The final protection rating depends on the complete enclosure assembly, including its doors, covers, seals, cable entries and installation quality. The PTBB7536 is therefore particularly useful where a sealed, unperforated enclosure surface is required.
The panel's dual-purpose design allows the same article to be installed at the top or bottom of a compatible cabinet. One panel is supplied per article; installations requiring both a top and bottom closure normally require two panels. The included fixing screws support straightforward mechanical assembly in accordance with ABB installation instructions.
| Series | System Pro E Power |
|---|---|
| Model / type | PTBB7536 |
| ABB order code | 1STQ007091A0000 |
| Product type | Blind top/bottom enclosure panel |
| Product category | Electrical enclosure accessories |
| Nominal width | 750 mm |
| Nominal depth | 300 mm |
| Protection rating | IP65 when correctly installed in a compatible enclosure assembly |
| Material | Pickled sheet steel |
| Panel construction | Solid / blind |
| Sealing | IP65 gasket supplied |
| Mounting position | Top or bottom |
| Fixing hardware | Four M12 × 20 mm screws |
| Supply quantity | 1 panel |
| Compatible enclosure system | ABB System Pro E Power |
| Application | Low-voltage switchboard and electrical cabinet construction |
The ABB PTBB7536 is a blind top/bottom enclosure panel used to close compatible ABB System Pro E Power electrical switchboards, supporting mechanical protection and IP65 sealing when correctly installed.
The panel is specified for an enclosure configuration with a 750 mm nominal width and 300 mm nominal depth.
The PTBB7536 is designed for IP65 enclosure applications and is supplied with a sealing gasket. The complete switchboard must be correctly assembled with compatible components to achieve the intended IP65 protection rating.
Yes. The ABB PTBB7536 is designed for use in either the top or bottom position of a compatible enclosure. Each article contains one panel, so two units are normally required when both positions need the same closure.
The panel is manufactured from pickled sheet steel and supplied with an IP65 sealing gasket for use in compatible electrical enclosure assemblies.
ABB System Pro E Power enclosure components are designed to support modular, reliable and professionally assembled low-voltage electrical switchboards. The PTBB7536 blind top/bottom panel combines durable steel construction, IP65 sealing provision and versatile installation to meet the requirements of industrial and commercial electrical distribution projects.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.