Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB 1STQ007086B0000 System Pro E Power internal installation kit for two fixed 3-pole or 4-pole Tmax XT5 circuit breakers in an interlocked, motor-operated 400/630 A configuration designed for 600 mm wide low-voltage switchboards.
£556.30
The ABB 1STQ007086B0000 is a dedicated internal circuit breaker installation kit for the ABB System Pro E Power low-voltage switchboard range. Identified by the manufacturer as 2 XT5 KIT 3-4P F.IM 400/630A H.W=600, this accessory is designed for an installation arrangement incorporating two ABB Tmax XT5 moulded case circuit breakers (MCCBs) in compatible 3-pole or 4-pole configurations.
As part of the ABB System Pro E Power modular switchboard system, the 1STQ007086B0000 provides a coordinated mechanical mounting solution for electrical panel builders, switchboard manufacturers and industrial electrical contractors. The kit is intended for fixed circuit breaker installations with the specified interlocked motor-operated arrangement, supporting the integration of compatible Tmax XT5 circuit breakers into professional low-voltage distribution assemblies.
Designed for 400/630 A circuit breaker configurations and a 600 mm nominal switchboard width, the ABB 1STQ007086B0000 supports the installation of two compatible XT5 circuit breakers. Its application-specific design helps simplify component selection and provides a practical mounting solution for industrial power distribution systems requiring coordinated circuit breaker arrangements.
The ABB 1STQ007086B0000 installation kit is designed to support the mechanical integration of two compatible Tmax XT5 circuit breakers within the System Pro E Power switchboard platform. Its specified fixed, interlocked and motor-operated configuration makes it suitable for electrical distribution applications requiring coordinated switching arrangements between two circuit breakers.
The kit is identified for 3-pole or 4-pole Tmax XT5 circuit breakers in designated 400/630 A configurations. The 600 mm width designation identifies the nominal switchboard arrangement for which the kit is intended. It should not be interpreted as the overall physical width of the packaged installation kit.
Mechanically interlocked circuit breaker arrangements can be used in power distribution systems where the operating positions of two breakers must be coordinated. Motor-operated circuit breakers also allow electrical actuation when equipped with the appropriate operating accessories and control equipment. The exact interlocking method and operating sequence depend on the complete circuit breaker and accessory configuration.
The ABB 1STQ007086B0000 is an installation kit rather than a complete circuit breaker assembly. It should not be assumed to include the Tmax XT5 circuit breakers, motor operators, interlocking mechanisms or electrical control equipment unless these are explicitly listed in the supplied kit contents. The current rating, breaking capacity, trip unit and protection characteristics are determined by the separately selected circuit breakers.
For correct installation, the kit must be matched with the appropriate System Pro E Power enclosure structure, compatible XT5 circuit breaker versions and any additional mounting or operating accessories specified in the relevant ABB assembly documentation.
The ABB 1STQ007086B0000 is an internal installation kit designed for mounting two compatible ABB Tmax XT5 circuit breakers in a fixed, interlocked and motor-operated arrangement within System Pro E Power low-voltage switchboards.
The kit is specified for ABB Tmax XT5 moulded case circuit breakers in compatible 3-pole or 4-pole configurations, with designated 400/630 A breaker arrangements.
The kit is designed for an installation arrangement incorporating two compatible Tmax XT5 circuit breakers within the specified System Pro E Power switchboard configuration.
The manufacturer designation specifies 400/630 A circuit breaker configurations. These values identify the compatible breaker arrangements rather than an independent electrical current rating of the mechanical installation kit.
The ABB 1STQ007086B0000 is designated for a 600 mm nominal switchboard width within the compatible System Pro E Power enclosure system.
Yes. The manufacturer designation 3-4P identifies compatibility with the specified 3-pole and 4-pole Tmax XT5 configurations.
Yes. The kit is designated for a fixed, interlocked and motor-operated circuit breaker arrangement. Compatible motor operators and associated control accessories must be selected according to the complete installation requirements.
The product is identified as an installation kit, not a complete circuit breaker assembly. The Tmax XT5 breakers and any required operating or interlocking accessories should be treated as separately specified components unless the supplied kit contents explicitly state otherwise.
The official ABB manufacturer order code is 1STQ007086B0000, corresponding to the System Pro E Power installation kit designated 2 XT5 KIT 3-4P F.IM 400/630A H.W=600.
ABB System Pro E Power installation accessories provide coordinated mechanical solutions for professional low-voltage switchboard construction. The ABB 1STQ007086B0000 supports the installation of two compatible fixed Tmax XT5 circuit breakers in a designated interlocked, motor-operated arrangement for 600 mm wide switchboard configurations, helping panel builders create organised and dependable electrical distribution assemblies.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.