Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB 1STQ007083B0000 System pro E power fixed horizontal motor-operated installation kit for compatible 3-pole and 4-pole Tmax XT5 400 A and 630 A moulded case circuit breaker configurations in 600 mm wide switchboard sections.
£238.69
The ABB 1STQ007083B0000 is a dedicated XT5 fixed motorised circuit breaker installation kit designed for compatible ABB System pro E power low-voltage switchboard assemblies. Specified for 3-pole and 4-pole ABB Tmax XT5 moulded case circuit breakers in the 400 A and 630 A frame ranges, this kit supports a fixed horizontal mounting arrangement within switchboard sections with a 600 mm nominal width.
As part of the ABB System pro E power modular switchboard range, the installation kit facilitates the integration of compatible XT5 circuit breakers equipped for motor-operated applications. Its designated MOT configuration identifies an installation arrangement intended to accommodate a suitable motor-operated circuit breaker assembly, making it relevant to electrical distribution systems requiring electrically operated switching equipment.
The ABB 1STQ007083B0000 combines compatibility with 3-pole and 4-pole XT5 devices, support for 400 A and 630 A frames, and a dedicated horizontal fixed installation arrangement. It is suitable for professional switchboard manufacturers, industrial panel builders and electrical contractors constructing coordinated ABB System pro E power distribution assemblies.
ABB System pro E power is a modular low-voltage switchboard system developed for electrical distribution applications in industrial, commercial and infrastructure environments. Its coordinated range of cabinet structures, mounting kits and installation accessories enables switchboard manufacturers to incorporate compatible switching and protection equipment into organised electrical assemblies.
The ABB 1STQ007083B0000 XT5 installation kit is specified for 400 A and 630 A ABB Tmax XT5 circuit breaker frames in compatible 3-pole and 4-pole arrangements. The kit is intended for fixed horizontal installation within a System pro E power switchboard section with a nominal width of 600 mm.
The manufacturer's MOT designation identifies the motor-operated installation configuration. Motor operators are used with compatible circuit breakers to enable electrically initiated switching operations, potentially supporting remote control and automated distribution functions when incorporated into a suitably designed control system. The installation kit itself should not be confused with the circuit breaker, motor operator or associated control equipment.
ABB Tmax XT5 moulded case circuit breakers are used for low-voltage power distribution and circuit protection. Depending on the selected breaker and trip unit, they may provide overload, short-circuit and additional protection functions. The 1STQ007083B0000 is a mechanical installation accessory and does not independently provide electrical protection or switching functionality.
The fixed mounting arrangement is intended for circuit breakers installed in their designated position rather than withdrawable configurations. When a motor-operated XT5 arrangement is selected, the overall installation must also accommodate the relevant operating mechanism, electrical connections, control wiring, clearances and maintenance access.
Correct compatibility checks are essential before installation. The selected XT5 frame, pole configuration, motor operator, mounting orientation and cabinet section must match the applicable ABB assembly documentation. The exact supplied kit components and any separately required accessories should be confirmed against the manufacturer's installation instructions.
Using coordinated ABB System pro E power accessories helps switchboard manufacturers maintain consistent installation arrangements and integrate motor-operated switching equipment into suitable low-voltage distribution systems. The completed assembly's electrical performance, enclosure protection and operating characteristics depend on the selected circuit breaker, control equipment and overall switchboard design.
| Product range | System pro E power |
|---|---|
| ABB order code | 1STQ007083B0000 |
| Model / part number | 1STQ007083B0000 |
| Manufacturer description | XT5 KIT 3-4P FIXED MOT(400/630A)H.W=600 |
| Product type | Circuit breaker installation kit |
| Compatible circuit breaker family | ABB Tmax XT5 |
| Supported pole configurations | 3-pole / 4-pole |
| Compatible XT5 frame ratings | 400 A / 630 A |
| Circuit breaker mounting type | Fixed |
| Installation orientation | Horizontal |
| Operating arrangement designation | MOT (motor-operated configuration) |
| Nominal switchboard section width | 600 mm |
| Compatible enclosure system | ABB System pro E power |
| Associated equipment type | Moulded case circuit breaker (MCCB) |
| Component function | Installation of compatible fixed XT5 circuit breaker assemblies with motor-operated arrangements |
| Application | Low-voltage electrical distribution switchboards |
| Component category | Circuit breaker mounting and installation accessories |
The ABB 1STQ007083B0000 is an installation kit for compatible ABB Tmax XT5 moulded case circuit breakers. It is specified for fixed horizontal mounting with a motor-operated (MOT) arrangement in compatible ABB System pro E power switchboard assemblies.
The manufacturer specifies compatibility with the 400 A and 630 A XT5 frame ranges. The exact circuit breaker version, trip unit and motor-operated configuration must be checked against the applicable ABB installation documentation.
Yes. The kit is designated for compatible 3-pole and 4-pole ABB Tmax XT5 circuit breaker configurations, subject to the specified fixed horizontal motor-operated installation arrangement.
MOT identifies the motor-operated installation arrangement in the manufacturer's description. The kit is intended for a compatible XT5 motor-operated configuration, but the description does not establish that a motor operator or circuit breaker is included in the kit.
The kit is specified for a 600 mm nominal width ABB System pro E power switchboard section with a fixed horizontal mounting arrangement. The complete assembly should follow the applicable ABB mounting and installation instructions.
ABB System pro E power installation accessories support electrical panel builders, switchboard manufacturers and industrial electrical contractors in integrating compatible Tmax XT circuit breakers and motor-operated switching arrangements into coordinated low-voltage distribution assemblies.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.