Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ007083A0000 ABB PTBB4096 System pro E power IP65 Blind Top/Bottom Panel W400 D900
ABB PTBB4096 1STQ007083A0000 System pro E power IP65 blind top/bottom enclosure panel designed for compatible low-voltage electrical switchboard cabinets with a nominal width of 400 mm and depth of 900 mm.
£75.38
Why Choose the ABB PTBB4096 System pro E power IP65 Blind Top/Bottom Panel?
The ABB PTBB4096 (1STQ007083A0000) is a dedicated IP65 blind top/bottom panel designed for compatible ABB System pro E power low-voltage electrical switchboard enclosures. Specified for a 400 mm nominal enclosure width and 900 mm nominal depth, this accessory provides a closed panel arrangement for the upper or lower section of a matching electrical distribution cabinet.
As part of the ABB System pro E power modular switchboard range, the PTBB4096 supports enclosure configurations requiring protection against dust ingress and water jets. Its blind panel design provides a closed surface for the designated top or bottom opening, helping maintain the enclosure boundary when installed as part of a correctly configured IP65 switchboard assembly.
The ABB PTBB4096 is particularly suitable for switchboard manufacturers, electrical panel builders and industrial contractors working with 400 mm wide × 900 mm deep System pro E power cabinet arrangements. Its dedicated enclosure application makes it a practical choice for low-voltage distribution installations where cabinet compatibility, environmental protection and professional assembly are important.
Key Advantages
- Purpose-designed IP65 blind top/bottom panel for ABB System pro E power enclosures.
- IP65-designated configuration for compatible protected switchboard assemblies.
- 400 mm nominal enclosure width for matching cabinet arrangements.
- 900 mm nominal enclosure depth for compatible top and bottom positions.
- Blind panel construction provides a closed surface without designated cable-entry openings.
- Supports dust-tight and water-jet-resistant enclosure arrangements when correctly installed.
- Designed for integration with the ABB System pro E power modular switchboard system.
- Suitable for industrial and commercial electrical distribution applications.
Key Features
- ABB System pro E power enclosure accessory.
- ABB product designation PTBB4096.
- IP65 blind top/bottom panel configuration.
- 400 mm nominal cabinet width.
- 900 mm nominal cabinet depth.
- Designed for compatible upper or lower enclosure positions.
- Closed panel arrangement for designated cabinet openings.
- Supports the protective enclosure boundary of compatible IP65 assemblies.
- Mechanical accessory for modular low-voltage switchboard construction.
- Suitable for professional electrical panel manufacturing and cabinet assembly.
- Intended for installation in accordance with ABB System pro E power assembly instructions.
Reliable Enclosure Protection for Low-Voltage Switchboards
ABB System pro E power is a modular low-voltage switchboard system developed for electrical distribution applications in industrial, commercial and infrastructure environments. Its coordinated range of cabinet structures, doors, panels and mounting accessories enables switchboard manufacturers to configure enclosures for different equipment layouts and environmental protection requirements.
The ABB PTBB4096 IP65 blind top/bottom panel is specified for compatible 400 mm wide × 900 mm deep cabinet arrangements. By closing the designated top or bottom opening, the panel helps maintain the physical enclosure boundary and reduces potential ingress paths associated with an uncovered cabinet section.
Under the IP classification system defined by IEC 60529, IP65 indicates protection against dust ingress and water jets. The PTBB4096 is identified as an IP65 panel, but the finished switchboard's protection rating depends on the complete enclosure configuration, including correctly selected seals, joints, doors, cable entries and other associated components.
The blind configuration is suitable where a closed top or bottom surface is required rather than a dedicated cable-entry or ventilation opening. Where cable access is necessary, a compatible alternative component or manufacturer-approved installation arrangement should be selected to preserve the intended enclosure protection.
Correct installation is essential for achieving the specified assembly performance. The ABB PTBB4096 should be fitted using the mounting and sealing arrangements required by the applicable System pro E power documentation. The panel does not independently establish the IP rating, electrical characteristics or environmental suitability of the completed switchboard.
Typical Applications
- ABB System pro E power low-voltage switchboard assemblies.
- IP65-designated top and bottom enclosure closure arrangements.
- Compatible 400 mm wide × 900 mm deep electrical distribution cabinets.
- Industrial electrical power distribution enclosures.
- Commercial building main and sub-distribution switchboards.
- Electrical control and distribution installations requiring protected cabinet configurations.
- Professional switchboard manufacturing and electrical panel-building projects.
- Compatible enclosure maintenance, refurbishment and blind panel replacement.
Technical Specifications
| Product range | System pro E power |
|---|---|
| Product designation | PTBB4096 |
| ABB order code | 1STQ007083A0000 |
| Model / part number | PTBB4096 |
| Product type | Blind top/bottom enclosure panel |
| Designated protection rating | IP65 |
| Panel configuration | Blind / closed |
| Installation position | Top or bottom |
| Nominal enclosure width | 400 mm |
| Nominal enclosure depth | 900 mm |
| Compatible enclosure system | ABB System pro E power |
| Component function | Closure of compatible top or bottom enclosure openings |
| Application | Low-voltage electrical distribution switchboards |
| Component category | Enclosure closure panels / top and bottom accessories |
Frequently Asked Questions
What is the ABB PTBB4096 used for?
The ABB PTBB4096 (1STQ007083A0000) is an IP65-designated blind top/bottom panel used to close compatible upper or lower openings in ABB System pro E power low-voltage electrical switchboard enclosures.
What enclosure dimensions is the ABB PTBB4096 designed for?
The PTBB4096 is specified for compatible System pro E power cabinets with a 400 mm nominal width and 900 mm nominal depth. These dimensions identify the intended cabinet configuration rather than necessarily representing the exact manufactured dimensions of the panel.
What does the IP65 designation mean for the ABB PTBB4096?
IP65 indicates dust-tight protection and protection against water jets under IEC 60529. The completed switchboard achieves its intended protection rating only when all enclosure components, seals and installation arrangements are correctly selected and assembled.
Can the ABB PTBB4096 be fitted at the top or bottom of a switchboard?
The manufacturer identifies the PTBB4096 as a blind top/bottom panel. Its suitability for a particular upper or lower cabinet position should be confirmed against the relevant ABB System pro E power assembly instructions.
Does the ABB PTBB4096 include cable-entry openings?
The PTBB4096 is specified as a blind panel, indicating a closed configuration rather than a dedicated cable-entry panel. Where cable access is required, a suitable compatible enclosure component should be selected to maintain the intended protection arrangement.
Trusted by Professional Switchboard Builders
ABB System pro E power enclosure accessories support electrical panel builders, switchboard manufacturers and industrial electrical contractors in constructing organised and protected low-voltage distribution assemblies using coordinated modular cabinet components.
