Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PTBB4056 1STQ007081A0000 is a System Pro E Power IP65 blind top/bottom enclosure component for compatible low-voltage switchboards with a nominal width of 400 mm and depth of 500 mm.
£59.74
The ABB 1STQ007081A0000, product reference PTBB4056, is an IP65 blind top/bottom enclosure component designed for compatible ABB System Pro E Power low-voltage switchboard assemblies. Identified by the manufacturer as IP65 BLIND TOP/BOTTOM W=400MM D=500MM, this accessory is specified for a nominal 400 mm width and 500 mm depth enclosure configuration.
Part of the ABB System Pro E Power range, the PTBB4056 is intended for professional electrical panel builders, switchgear manufacturers and industrial power distribution specialists. Its blind panel configuration provides a manufacturer-designated closed enclosure component for compatible top or bottom positions where a predefined access opening is not required.
The product's IP65 designation identifies its intended application within a compatible IP65 enclosure arrangement. The ingress protection of the completed switchboard depends on the correct selection and installation of all associated enclosure components, seals, joints and fixings. The PTBB4056 should therefore be installed according to ABB's applicable System Pro E Power technical documentation.
The ABB System Pro E Power range provides modular enclosure and structural components for constructing low-voltage electrical distribution switchboards. Top and bottom enclosure accessories form part of the cabinet's mechanical boundary, helping establish the intended enclosure arrangement when combined with the appropriate structural and sealing components.
The ABB PTBB4056 is specifically identified as an IP65 blind top/bottom component for a nominal 400 mm width and 500 mm depth. These dimensions distinguish the accessory from alternative enclosure configurations and provide a clear reference for selecting the designated panel. They should not automatically be interpreted as independently verified overall physical measurements of the supplied component.
The blind configuration identifies a closed enclosure surface rather than a panel with a predefined cable-entry or access opening. This makes the PTBB4056 relevant to compatible switchboard designs where the corresponding top or bottom position is intended to remain closed. Any additional drilling, cutting or modification should be assessed against ABB's installation requirements because it may affect the enclosure's ingress protection.
The manufacturer's IP65 designation relates to the intended enclosure configuration. Under IEC 60529, an achieved IP65 classification indicates dust-tight protection and protection against water jets. However, the designation of this individual component does not independently guarantee that the completed switchboard will achieve IP65. Correct sealing, assembly and verification remain essential, alongside applicable requirements of the IEC 61439 series for the finished low-voltage switchboard.
| Product group | System Pro E Power |
|---|---|
| ABB order code | 1STQ007081A0000 |
| Manufacturer product reference | PTBB4056 |
| Manufacturer designation | IP65 BLIND TOP/BOTTOM W=400MM D=500MM |
| Product type | Blind top/bottom enclosure component |
| Designated ingress protection | IP65 enclosure configuration |
| Panel configuration | Blind |
| Designated positions | Top or bottom |
| Nominal width configuration | 400 mm |
| Nominal depth configuration | 500 mm |
| Primary function | Mechanical closure of a compatible enclosure top or bottom position |
| Compatible enclosure system | ABB System Pro E Power |
| Equipment category | Low-voltage switchboard enclosure accessories |
| Application | Compatible modular electrical enclosure construction |
| Installation requirement | Assembly according to ABB's applicable enclosure instructions |
The ABB 1STQ007081A0000 PTBB4056 is an IP65 blind top/bottom enclosure component for compatible ABB System Pro E Power low-voltage switchboards. It is intended to provide a closed enclosure surface in the designated top or bottom position.
The manufacturer specifies a nominal 400 mm width and 500 mm depth. These values identify the intended enclosure configuration rather than independently verifying every physical dimension of the individual component.
The blind top/bottom designation identifies a closed enclosure component intended for a compatible top or bottom position, without a manufacturer-designated access opening. Its exact mounting arrangement and any required sealing accessories should be confirmed using ABB's technical documentation.
No. The IP65 designation identifies the intended enclosure configuration, but the ingress protection of the completed switchboard depends on compatible enclosure components, sealing arrangements, installation methods and assembly verification. The individual accessory does not independently guarantee an IP65 rating for the finished cabinet.
No. The PTBB4056 is designated for compatible System Pro E Power top or bottom enclosure arrangements with a nominal 400 mm width, 500 mm depth and the specified IP65 configuration. Compatibility should be checked against the selected cabinet structure and ABB's applicable assembly instructions.
ABB System Pro E Power enclosure accessories support professional electrical panel builders and switchgear manufacturers in constructing modular low-voltage distribution assemblies. The ABB 1STQ007081A0000 PTBB4056 provides a manufacturer-designated IP65 blind top/bottom component for compatible 400 mm wide and 500 mm deep enclosure configurations, supporting the intended closed-panel arrangement when correctly integrated with the corresponding ABB components.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.