Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PTBB4026 System pro E Power IP65 blind top/bottom enclosure component for compatible low-voltage electrical distribution cabinets with a specified width of 400 mm and depth of 200 mm.
£49.74
The ABB PTBB4026, manufacturer order code 1STQ007079A0000, is an IP65 blind top/bottom enclosure component designed for compatible ABB System pro E Power low-voltage electrical distribution cabinets. Identified by the manufacturer designation IP65 BLIND TOP/BOTTOM W=400MM D=200MM, this component is specified for an enclosure configuration measuring 400 mm wide and 200 mm deep.
As part of the ABB System pro E Power range, the PTBB4026 supports the construction of modular electrical distribution assemblies requiring appropriately specified top and bottom enclosure closures. Its blind configuration identifies a closed panel arrangement, making it suitable for compatible cabinet designs where an open cable-entry or ventilation section is not required at the selected position.
The manufacturer's IP65 designation identifies the intended ingress protection configuration, while the specified width and depth help electrical panel builders select the correct component for their cabinet layout. Achieving the required protection level depends on the complete enclosure assembly, including compatible sealing components, fixings and installation methods specified by ABB.
Industrial and commercial electrical distribution systems require appropriately designed enclosures to accommodate switching, protection, metering and control equipment. Top and bottom enclosure components form part of the cabinet's external structure, helping maintain the intended enclosure arrangement while protecting installed electrical equipment from environmental exposure. Blind panels are particularly relevant where a closed enclosure section is required instead of an open cable-entry or ventilation configuration.
The ABB System pro E Power range provides modular solutions for professional low-voltage switchgear construction. The PTBB4026 is specified for an IP65 blind top/bottom configuration with a width of 400 mm and depth of 200 mm. Under the IP classification system, IP65 indicates dust-tight protection and protection against water jets when achieved by a correctly assembled enclosure. The final protection level must be confirmed for the complete cabinet, including the selected seals, fixings, adjoining panels and any modifications made during installation.
| Series | System pro E Power |
|---|---|
| Manufacturer designation | IP65 BLIND TOP/BOTTOM W=400MM D=200MM |
| Manufacturer order code | 1STQ007079A0000 |
| Product type | Blind top/bottom electrical enclosure component |
| Product group | System pro E Power |
| Ingress protection designation | IP65 |
| Panel configuration | Blind |
| Application position | Top / bottom |
| Specified enclosure width | 400 mm |
| Specified enclosure depth | 200 mm |
| Installation system | ABB System pro E Power |
| Primary function | Closure of compatible enclosure top or bottom sections |
| Application | Low-voltage electrical distribution and switchgear enclosure construction |
The ABB PTBB4026 is an IP65 blind top/bottom enclosure component intended to close compatible top or bottom sections of ABB System pro E Power low-voltage electrical distribution cabinets.
The manufacturer designation specifies a 400 mm width and 200 mm depth. These values identify the intended enclosure configuration; detailed component dimensions and installation clearances should be confirmed using ABB technical documentation.
IP65 identifies an ingress protection classification associated with dust-tight protection and resistance to water jets. The completed enclosure must be correctly assembled and verified to achieve its specified protection level.
Blind top/bottom identifies a closed enclosure component intended for a compatible cabinet top or bottom position. The exact mounting arrangement and associated sealing requirements should be confirmed using ABB installation instructions.
The PTBB4026 belongs to the ABB System pro E Power range. Compatibility with a particular cabinet configuration and its required ingress protection should be confirmed using the applicable ABB technical documentation.
ABB System pro E Power accessories support professional low-voltage switchgear and electrical enclosure construction. The PTBB4026 IP65 blind top/bottom component provides a dedicated 400 mm width and 200 mm depth configuration for compatible cabinet assemblies, helping electrical panel builders and industrial engineers select appropriate enclosure closure components for protected power distribution installations.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.