Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ007078A0000 ABB PTBB3096 System pro E Power IP65 Blind Top/Bottom Panel W300 D900mm
ABB PTBB3096 (1STQ007078A0000) is an IP65 blind top/bottom enclosure panel designed for compatible System pro E Power modular low-voltage switchboard cabinets with a width of 300 mm and depth of 900 mm.
£56.25
Why Choose the ABB PTBB3096 IP65 Blind Top/Bottom Panel?
The ABB PTBB3096, manufacturer order code 1STQ007078A0000, is an IP65 blind top/bottom panel designed for the ABB System pro E Power modular low-voltage electrical distribution switchboard system. Identified by ABB as IP65 BLIND TOP/BOTTOM W=300MM D=900MM, this enclosure accessory is specified for compatible switchboard arrangements measuring 300 mm wide and 900 mm deep.
As part of ABB's System pro E Power enclosure accessory range, the PTBB3096 provides a blind, or unperforated, panel configuration for the top or bottom of a compatible electrical cabinet. Its purpose is to close the designated enclosure opening as part of a coordinated switchboard assembly, helping maintain the enclosure's intended separation from the surrounding environment.
The IP65 designation identifies the specified protection configuration, suitable for applications requiring dust-tight construction and protection against water jets when the complete enclosure is correctly assembled and verified. The ABB PTBB3096 is intended for professional switchboard manufacturers, electrical panel builders and industrial installation projects requiring a matching blind top/bottom component for a 300 mm × 900 mm System pro E Power cabinet arrangement.
Key Advantages
- Genuine ABB accessory: Designed for the System pro E Power modular switchboard platform.
- IP65 configuration: Specified for enclosure arrangements requiring an IP65 protection level.
- Blind panel design: Provides a closed top or bottom panel without a predefined cable-entry opening.
- 300 mm width: Matches compatible System pro E Power enclosure configurations of the specified width.
- 900 mm depth: Designed for corresponding deep cabinet arrangements.
- Top/bottom application: Identified for use in compatible upper or lower enclosure positions.
- Coordinated integration: Intended for use with appropriately selected ABB enclosure structures and sealing components.
- Modular construction: Supports organised switchboard enclosure assembly and configuration.
- Professional applications: Suitable for industrial and commercial low-voltage electrical distribution cabinets.
- Accurate identification: ABB type PTBB3096 and order code 1STQ007078A0000 simplify specification and procurement.
Key Features
- ABB System pro E Power modular enclosure accessory.
- Product designation: PTBB3096.
- ABB manufacturer order code: 1STQ007078A0000.
- Manufacturer description: IP65 BLIND TOP/BOTTOM W=300MM D=900MM.
- Product type: Blind top/bottom enclosure panel.
- Specified protection configuration: IP65.
- Compatible cabinet width: 300 mm.
- Compatible cabinet depth: 900 mm.
- Panel configuration: Blind, without a predefined opening.
- Installation position: Top or bottom of a compatible enclosure.
- Compatible platform: ABB System pro E Power.
- Primary function: Closure of a designated switchboard enclosure opening.
- Application: Modular low-voltage electrical distribution switchboards.
IP65 Blind Panel Integration for Modular Electrical Switchboards
The ABB System pro E Power range provides coordinated structural components, enclosure panels and installation accessories for constructing modular low-voltage electrical distribution switchboards. Top and bottom panels are important elements of the cabinet enclosure, helping close the framework and establish the required physical separation between internal electrical equipment and the surrounding environment.
The ABB PTBB3096 is specifically identified as an IP65 blind top/bottom panel for a 300 mm wide and 900 mm deep cabinet arrangement. Its blind configuration is appropriate where the selected top or bottom position does not require a predefined cable-entry or ventilation opening.
Under the IEC 60529 ingress protection classification, IP65 denotes protection against dust ingress and water jets. However, the protection level of the finished switchboard depends on the complete enclosure construction, including compatible panels, joints, seals, fasteners and any subsequent openings. The PTBB3096's IP65 designation should therefore not be interpreted as an independent IP65 certification for every assembled cabinet configuration.
The PTBB3096 is a mechanical enclosure accessory, not an electrical switching or circuit protection device. Correct installation requires confirmation of the corresponding System pro E Power cabinet arrangement and the applicable ABB assembly instructions. Any modifications, cable penetrations or incompatible components may affect the completed enclosure's ingress protection.
Typical Applications
- ABB System pro E Power modular switchboard enclosures.
- Compatible 300 mm wide and 900 mm deep electrical cabinets.
- Switchboard assemblies requiring an IP65 top or bottom panel configuration.
- Industrial low-voltage power distribution cabinets.
- Commercial building electrical distribution switchboards.
- Blind closure of compatible cabinet top openings.
- Blind closure of compatible cabinet bottom openings.
- Electrical panel building and switchboard manufacturing.
- Electrical plant rooms and power distribution infrastructure.
- Enclosure assembly projects requiring coordinated ABB System pro E Power closing panels.
Technical Specifications
| Product reference | PTBB3096 |
|---|---|
| ABB order code | 1STQ007078A0000 |
| SKU / MPN | 1STQ007078A0000 |
| Product description | IP65 BLIND TOP/BOTTOM W=300MM D=900MM |
| Product series | System pro E Power |
| ABB product group | System Pro E Power |
| Product category | Switchboard enclosure panels and accessories |
| Component type | Blind top/bottom panel |
| Specified ingress protection configuration | IP65 |
| Compatible cabinet width | 300 mm |
| Compatible cabinet depth | 900 mm |
| Panel design | Blind / unperforated |
| Installation location | Top or bottom enclosure position |
| Compatible switchboard system | ABB System pro E Power |
| Installation type | Modular enclosure assembly |
| Component function | Enclosure opening closure |
| Intended application | Low-voltage electrical distribution switchboard construction |
Frequently Asked Questions
What is the ABB PTBB3096 used for?
The ABB PTBB3096 is an IP65 blind top/bottom panel designed to close a compatible enclosure opening within an ABB System pro E Power modular low-voltage electrical switchboard.
What are the specified dimensions of the ABB PTBB3096?
The ABB PTBB3096 is specified for a compatible cabinet arrangement with a 300 mm width and 900 mm depth. These are the manufacturer's stated enclosure configuration dimensions.
What does IP65 mean for the ABB PTBB3096?
The IP65 designation identifies a protection configuration intended to provide dust-tight construction and protection against water jets. The completed switchboard must be correctly assembled with compatible components and sealing arrangements to achieve its specified ingress protection.
Can the ABB PTBB3096 be installed at the top or bottom of a switchboard?
Yes. The manufacturer identifies the PTBB3096 as a blind top/bottom panel. Its use in a particular position must match the compatible ABB System pro E Power enclosure configuration and installation instructions.
Does the ABB PTBB3096 include a complete switchboard enclosure?
No. The ABB PTBB3096 is a blind enclosure panel accessory rather than a complete electrical cabinet. Additional compatible System pro E Power framework components, panels and installation accessories are required to construct the finished switchboard.
Trusted by Electrical Panel Builders Worldwide
ABB System pro E Power enclosure accessories support the construction of coordinated modular low-voltage electrical distribution switchboards. The ABB PTBB3096 provides an IP65 blind top/bottom panel configuration for compatible 300 mm wide and 900 mm deep cabinets, helping professional panel builders select appropriately matched enclosure components for reliable electrical distribution installations.
