Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ007077A0000 ABB PTBB3076 IP65 Blind Top/Bottom Panel 300mm x 700mm
ABB PTBB3076 1STQ007077A0000 is an IP65 blind top/bottom enclosure accessory for compatible System Pro E Power low-voltage switchgear assemblies, specified for a nominal width of 300 mm and depth of 700 mm.
£47.66
Why Choose the ABB PTBB3076 IP65 Blind Top/Bottom Panel – 300 mm x 700 mm?
The ABB PTBB3076 IP65 Blind Top/Bottom Panel (1STQ007077A0000) is a dedicated enclosure accessory for compatible ABB System Pro E Power low-voltage switchgear assemblies. Identified by the manufacturer's description IP65 BLIND TOP/BOTTOM W=300MM D=700MM, this component is specified for a top or bottom enclosure arrangement with a nominal width of 300 mm and depth of 700 mm.
Designed for use within the ABB System Pro E Power range, the PTBB3076 provides a manufacturer-identified solution for completing compatible switchgear enclosure configurations requiring a blind top or bottom covering component. The blind designation indicates an enclosed covering arrangement rather than a component explicitly identified with ventilation or cable-entry openings.
The product is associated with an IP65 enclosure configuration, making it relevant to switchboard designs where the specified protection against dust and water ingress is an important consideration. The declared protection level of the finished installation depends on the complete enclosure construction, including its joints, seals, doors, panels and any cable-entry arrangements.
With product reference PTBB3076 and ABB order code 1STQ007077A0000, this accessory supports accurate component identification for professional panel builders, switchgear manufacturers and maintenance engineers. Its designated 300 mm width and 700 mm depth help distinguish it from other System Pro E Power top and bottom enclosure accessories.
Key Advantages
- Purpose-designed ABB System Pro E Power blind top/bottom enclosure accessory.
- Specified for compatible IP65 enclosure configurations.
- Suitable for manufacturer-designated top or bottom installation positions.
- Blind covering arrangement for compatible switchgear enclosure openings.
- Specified for a nominal 300 mm width.
- Designed for a nominal 700 mm depth configuration.
- Supports the intended enclosure covering arrangement of modular low-voltage switchboards.
- Helps panel builders select the correct component for the specified enclosure dimensions.
- Suitable for professional electrical distribution switchboard construction.
- Provides a manufacturer-specific accessory for approved maintenance and refurbishment.
- Clearly identified by ABB order code 1STQ007077A0000.
- Part of the established ABB System Pro E Power switchgear enclosure range.
Key Features
- Manufacturer: ABB.
- Product reference: PTBB3076.
- ABB order code: 1STQ007077A0000.
- Manufacturer description: IP65 BLIND TOP/BOTTOM W=300MM D=700MM.
- Product group: System Pro E Power.
- Component type: Blind top/bottom enclosure accessory.
- Designated protection configuration: IP65.
- Installation position: Top or bottom, as specified by the assembly design.
- Nominal width: 300 mm.
- Nominal depth: 700 mm.
- Covering type: Blind.
- Intended for compatible System Pro E Power enclosure assemblies.
- Supports manufacturer-specified enclosure covering arrangements.
- Suitable for original switchboard construction and approved replacement applications.
- Requires the correct associated mounting and sealing arrangement.
Technical Specifications
- Manufacturer: ABB
- Product group: System Pro E Power
- Product reference: PTBB3076
- ABB order code: 1STQ007077A0000
- Product name: ABB PTBB3076 IP65 Blind Top/Bottom Panel – 300 mm x 700 mm
- Manufacturer description: IP65 BLIND TOP/BOTTOM W=300MM D=700MM
- Product type: Blind top/bottom enclosure component
- Accessory category: Low-voltage switchgear enclosure covering accessory
- Product family: System Pro E Power
- Designated IP configuration: IP65
- Installation position: Top/bottom
- Covering configuration: Blind
- Nominal width: 300 mm
- Nominal depth: 700 mm
- Primary function: Covering a designated top or bottom area of a compatible switchgear enclosure
- Associated equipment: ABB System Pro E Power low-voltage switchgear enclosures
- Equipment compatibility: System Pro E Power configurations specifying PTBB3076
- Mounting arrangement: According to the applicable ABB enclosure assembly instructions
- Product classification: Switchgear enclosure top/bottom covering accessory
- Application: Low-voltage electrical distribution switchboard construction and maintenance
IP65 Blind Top and Bottom Panels in ABB System Pro E Power Switchgear
The ABB System Pro E Power range provides modular enclosure solutions for constructing low-voltage electrical distribution switchboards. These assemblies can incorporate structural frames, doors, side panels, mounting systems, internal separation components and top or bottom covering accessories selected according to the requirements of the completed electrical installation.
Top and bottom enclosure components form part of the outer mechanical construction of a switchboard. Their role is to complete the designated upper or lower enclosure arrangement while accommodating the structural and installation requirements of the selected cabinet configuration.
The ABB PTBB3076 is described as a blind top/bottom component. In electrical enclosure terminology, a blind covering component is generally associated with a closed arrangement rather than a purpose-designed ventilation grille or open cable-entry plate. The exact construction, openings and fixing details of this ABB accessory should be confirmed using the relevant manufacturer drawing.
The product designation includes IP65. Under the ingress protection classification system, the first digit 6 indicates a dust-tight enclosure, while the second digit 5 indicates protection against water jets under the applicable test conditions. These classifications are defined by BS EN 60529.
Although the PTBB3076 is specified for an IP65 configuration, the component does not independently establish the ingress protection rating of a complete switchboard. The finished enclosure must use the appropriate doors, covers, sealing arrangements, joints and cable-entry components, installed in accordance with the manufacturer's instructions.
The manufacturer's description specifies W=300MM and D=700MM, identifying nominal width and depth parameters of 300 mm and 700 mm. These dimensions are important when selecting the accessory for the intended enclosure configuration. They should not automatically be interpreted as the exact overall measurements of the supplied component, including any folded edges or fixing features.
Correct top and bottom component selection is particularly important in modular switchgear systems where different enclosure widths, depths and protection configurations are available. A blind component intended for a 300 mm by 700 mm configuration should not be substituted for another size without confirmation from the applicable System Pro E Power parts list.
Where an electrical enclosure requires cable entries, ventilation or other openings, the designer must select the appropriate manufacturer-approved arrangement. Cutting or modifying a blind covering component without an approved design and suitable verification may affect the enclosure's mechanical integrity and ingress protection performance.
Low-voltage switchgear and controlgear assemblies may be designed and verified in accordance with BS EN IEC 61439. The suitability of the complete enclosure depends on the assembled system, including relevant mechanical, thermal and electrical considerations. An individual top/bottom covering accessory does not independently establish compliance with the complete assembly standard.
For new installations or replacement work, confirm the PTBB3076 product reference, ABB order code 1STQ007077A0000, IP65 designation, blind top/bottom configuration and nominal 300 mm width by 700 mm depth against the relevant ABB System Pro E Power assembly documentation.
Typical Applications
- ABB System Pro E Power low-voltage switchgear enclosures.
- Compatible switchboard configurations specifying IP65 protection.
- Blind top enclosure covering arrangements.
- Blind bottom enclosure covering arrangements.
- Enclosure configurations with a nominal width of 300 mm.
- Enclosure configurations with a nominal depth of 700 mm.
- Industrial low-voltage electrical distribution switchboards.
- Commercial building electrical distribution panels.
- Main and sub-distribution switchgear assemblies.
- Modular electrical enclosure manufacturing.
- System Pro E Power switchgear refurbishment projects.
- Manufacturer-approved top/bottom covering component replacement.
Frequently Asked Questions
What is the ABB PTBB3076 1STQ007077A0000 used for?
The ABB PTBB3076 is a blind top/bottom enclosure accessory for compatible ABB System Pro E Power low-voltage switchgear assemblies. It is specified for an IP65 configuration with a nominal width of 300 mm and depth of 700 mm.
What is the ABB order code for the PTBB3076?
The ABB order code is 1STQ007077A0000. The product reference is PTBB3076, and it belongs to the ABB System Pro E Power product group.
What does IP65 mean in the ABB PTBB3076 description?
IP65 identifies a protection classification associated with dust-tight construction and protection against water jets under the applicable test conditions. The completed switchgear enclosure must be correctly assembled and verified to achieve its declared IP65 rating.
What does Blind Top/Bottom mean for the ABB PTBB3076?
Blind Top/Bottom identifies an enclosure covering component intended for a designated top or bottom position. The blind designation distinguishes it from accessories specifically identified with ventilation or cable-entry openings. The exact construction should be checked against ABB's technical documentation.
What does W=300MM mean for the ABB PTBB3076?
W=300MM identifies a nominal enclosure width parameter of 300 mm. The exact physical width and fixing geometry of the supplied component should be confirmed using the applicable ABB technical drawing.
What does D=700MM mean in the ABB PTBB3076 specification?
D=700MM identifies a nominal enclosure depth parameter of 700 mm. It is used to select the correct component for the intended System Pro E Power configuration and does not establish every external dimension of the accessory.
Can the ABB PTBB3076 be installed at either the top or bottom of an enclosure?
The manufacturer's description identifies the product as a top/bottom accessory. Its suitability for a particular upper or lower mounting position must be confirmed against the applicable System Pro E Power assembly drawings and associated fixing arrangements.
Which ABB switchgear systems are compatible with the PTBB3076?
The PTBB3076 belongs to the ABB System Pro E Power range. It should be used only with enclosure configurations that specify this product reference and match the required IP65, blind top/bottom, 300 mm width and 700 mm depth designations.
Does the ABB PTBB3076 independently provide an IP65 rating?
No. The ABB PTBB3076 is an accessory specified for an IP65 enclosure arrangement. The actual ingress protection rating depends on the complete enclosure construction, including all panels, doors, joints, seals and any cable-entry components.
Does the ABB PTBB3076 include sealing gaskets or fixing hardware?
The manufacturer description does not confirm whether gaskets, seals, fasteners or other mounting accessories are included. Check the relevant ABB supply documentation and assembly parts list to identify any separately required components.
What should be checked before ordering the ABB PTBB3076?
Confirm the ABB order code 1STQ007077A0000, product reference PTBB3076, IP65 designation, blind top/bottom arrangement, nominal 300 mm width and 700 mm depth. Check the applicable System Pro E Power parts list for compatibility, mounting requirements and any additional sealing accessories.
Designed for Professional ABB System Pro E Power Switchgear Installations
ABB System Pro E Power enclosure accessories support the construction, maintenance and refurbishment of professionally engineered low-voltage electrical distribution switchboards. The ABB PTBB3076 IP65 Blind Top/Bottom Panel provides a manufacturer-identified covering accessory for compatible 300 mm-wide, 700 mm-deep enclosure configurations, helping panel builders and maintenance engineers select the correct component for their specified switchgear assembly.
