1STQ007057A0000 ABB PPFM1250 System pro E power Front/Rear Plinth Flanges H100 W1250 Set of 4

1STQ007057A0000 ABB PPFM1250 System pro E power Front/Rear Plinth Flanges H100 W1250 Set of 4

ABB PPFM1250 1STQ007057A0000 System pro E power set of four front/rear plinth flanges for compatible low-voltage switchboard enclosures with a nominal plinth height of 100 mm and cabinet width of 1250 mm.

SKU: 1STQ007057A0000Alt SKU: PPFM1250MPN: 1STQ007057A0000
Price
List Price £92.37 ex VAT
Your Price (ex VAT)
£92.37
Manufacturer Lead Time Estimated Delivery 5 weeks
Get the best trade prices Trade exclusive

Create an online account to unlock exclusive pricing, special offers and more.

Create an online account Quick & easy setup
SUBTOTAL (EX VAT) £92.37
Trade pricing is personalised to your account

Manufacturer Lead Time

£92.37

Why Choose the ABB PPFM1250 System pro E power Front/Rear Plinth Flanges?

The ABB PPFM1250 (1STQ007057A0000) is a dedicated set of four front/rear plinth flanges designed for compatible ABB System pro E power low-voltage switchboard enclosures. Specified for a 100 mm nominal plinth height and 1250 mm nominal enclosure width, these components support the construction of coordinated plinth base assemblies for modular electrical distribution cabinets.

As part of the ABB System pro E power modular switchboard range, the PPFM1250 plinth flanges provide mechanical components for the front and rear sections of compatible cabinet base structures. Plinth assemblies are used to establish an elevated enclosure base, helping accommodate installation requirements and supporting the integration of electrical distribution cabinets into industrial and commercial environments.

The ABB PPFM1250 comprises four front/rear plinth flanges for matching 1250 mm wide System pro E power configurations with a 100 mm nominal plinth height. This makes the set a practical choice for switchboard manufacturers, electrical contractors and industrial panel builders requiring dedicated plinth accessories for new installations, compatible cabinet modifications and enclosure refurbishment projects.

Key Advantages

  • Purpose-designed front/rear plinth flanges for ABB System pro E power switchboards.
  • Supplied as a set of four flanges for the specified plinth arrangement.
  • 100 mm nominal plinth height for compatible cabinet base configurations.
  • 1250 mm nominal enclosure width for matching modular switchboard structures.
  • Supports coordinated construction of front and rear plinth sections.
  • Helps establish consistent mechanical arrangements during enclosure base assembly.
  • Designed for integration with the ABB System pro E power modular enclosure system.
  • Suitable for industrial and commercial low-voltage electrical distribution installations.

Key Features

  • ABB System pro E power plinth accessory.
  • ABB product designation PPFM1250.
  • Four front/rear plinth flanges.
  • 100 mm nominal plinth height.
  • 1250 mm nominal enclosure width.
  • Designed for compatible front and rear cabinet base arrangements.
  • Supports modular low-voltage switchboard plinth construction.
  • Dedicated mechanical components for electrical enclosure assembly.
  • Suitable for professional electrical panel manufacturing and cabinet installation.
  • Intended for installation in accordance with ABB System pro E power assembly instructions.

Reliable Plinth Integration for Low-Voltage Switchboard Enclosures

ABB System pro E power is a modular low-voltage switchboard system developed for electrical distribution applications in industrial, commercial and infrastructure environments. Its coordinated range of cabinet structures, panels, mounting accessories and plinth components enables switchboard manufacturers to configure electrical enclosures for different installation requirements.

The ABB PPFM1250 front/rear plinth flange set provides four dedicated components for compatible 1250 mm wide System pro E power enclosures using a 100 mm nominal plinth height. These flanges form part of the intended cabinet base arrangement and are selected to match the dimensions and configuration of the associated enclosure structure.

A correctly configured plinth can help provide clearance beneath an electrical cabinet and accommodate installation requirements such as floor-level cable routing, where supported by the complete enclosure design. The PPFM1250 flanges contribute to the mechanical construction of the plinth but do not independently establish its overall structural capacity or cable access arrangement.

Using dedicated ABB plinth accessories helps electrical panel builders maintain consistent cabinet dimensions and coordinate the installation of associated base components. The front/rear designation identifies the intended positioning of these flanges within the plinth arrangement. Any corresponding side sections, fixing hardware and additional components should be selected according to the relevant ABB System pro E power assembly documentation.

The ABB PPFM1250 is a mechanical enclosure accessory rather than an electrical switching or protection device. The completed switchboard's stability, load-bearing performance and enclosure protection rating depend on the overall cabinet design, installation environment and correct assembly of all required components.

Typical Applications

  • ABB System pro E power low-voltage switchboard assemblies.
  • Front and rear plinth construction for compatible 1250 mm wide cabinets.
  • 100 mm nominal height switchboard base configurations.
  • Industrial electrical power distribution enclosures.
  • Commercial building main and sub-distribution switchboards.
  • Modular electrical cabinet installation projects.
  • Professional switchboard manufacturing and electrical panel building.
  • Compatible plinth maintenance, refurbishment and component replacement.

Technical Specifications

Product range System pro E power
Product designation PPFM1250
ABB order code 1STQ007057A0000
Model / part number PPFM1250
Product type Front/rear plinth flange set
Component quantity 4 flanges
Plinth position Front/rear
Nominal plinth height 100 mm
Nominal enclosure width 1250 mm
Component function Mechanical plinth base assembly
Compatible enclosure system ABB System pro E power
Application Low-voltage electrical distribution switchboard enclosures
Component category Enclosure plinth accessories / front and rear flanges
Installation arrangement Integration into a compatible System pro E power plinth assembly

Frequently Asked Questions

What is the ABB PPFM1250 used for?

The ABB PPFM1250 (1STQ007057A0000) is a set of four front/rear plinth flanges used in compatible ABB System pro E power low-voltage switchboard enclosure base assemblies.

How many plinth flanges are included in the ABB PPFM1250 set?

The manufacturer description specifies four front/rear plinth flanges for the designated System pro E power plinth configuration.

What plinth height is the ABB PPFM1250 designed for?

The PPFM1250 is specified for a 100 mm nominal plinth height. This dimension identifies the intended cabinet base configuration rather than necessarily representing every physical dimension of an individual flange.

What enclosure width is compatible with the ABB PPFM1250?

The PPFM1250 is designed for compatible ABB System pro E power enclosures with a nominal width of 1250 mm. The exact flange dimensions and fixing arrangement should be checked against the relevant ABB assembly documentation.

Does the ABB PPFM1250 include a complete enclosure plinth?

The product is identified as a set of four front/rear plinth flanges, not a complete plinth assembly. Additional components, such as compatible side sections and fixing hardware, may be required depending on the selected cabinet configuration.

Trusted by Professional Switchboard Builders

ABB System pro E power plinth accessories support electrical panel builders, switchboard manufacturers and industrial electrical contractors in constructing organised and dependable low-voltage distribution enclosures using coordinated modular cabinet base components.