Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PPFM1010 1STQ007056A0000 System pro E power set of two front/rear plinth flanges for compatible low-voltage switchboard enclosures with a nominal plinth height of 100 mm and cabinet width of 1000 mm.
£86.58
The ABB PPFM1010 (1STQ007056A0000) is a dedicated set of two front/rear plinth flanges designed for compatible ABB System pro E power low-voltage switchboard enclosures. Specified for a 100 mm nominal plinth height and 1000 mm nominal cabinet width, these components support the construction of coordinated plinth base assemblies for modular electrical distribution cabinets.
As part of the ABB System pro E power modular switchboard range, the PPFM1010 plinth flanges provide components for the front and rear sections of a compatible enclosure base. Plinth assemblies are commonly used to elevate electrical cabinets above the installation floor, creating a defined base structure and supporting practical installation arrangements.
The ABB PPFM1010 includes two front/rear plinth flanges intended for matching 1000 mm wide System pro E power enclosures with a 100 mm plinth configuration. This makes the set suitable for professional switchboard manufacturers, electrical contractors and industrial panel builders requiring compatible plinth components for new electrical distribution installations or cabinet refurbishment projects.
ABB System pro E power is a modular low-voltage switchboard system developed for electrical distribution applications in industrial, commercial and infrastructure environments. Its coordinated range of cabinet structures, panels, mounting accessories and plinth components enables switchboard manufacturers to configure electrical enclosures for different installation requirements.
The ABB PPFM1010 front/rear plinth flange set provides two components for compatible 1000 mm wide System pro E power enclosures using a 100 mm nominal plinth height. These flanges form part of the intended cabinet base arrangement and are selected to match the dimensions of the associated enclosure structure.
A correctly configured plinth can help provide clearance beneath an electrical cabinet and accommodate installation requirements such as floor-level cable routing, where supported by the complete enclosure design. The PPFM1010 flanges contribute to the mechanical construction of the plinth but do not independently establish its overall structural capacity or cable access arrangement.
Using dedicated ABB plinth accessories helps panel builders maintain consistent cabinet dimensions and coordinate the installation of associated base components. The front/rear designation identifies the intended positioning of these flanges within the plinth arrangement; the corresponding side components, fixings and other required parts should be selected according to the relevant ABB assembly documentation.
The ABB PPFM1010 is a mechanical enclosure accessory rather than an electrical switching or protection device. The completed switchboard's load-bearing performance, stability and enclosure protection rating depend on the overall design, installation environment and correct assembly of all required components.
| Product range | System pro E power |
|---|---|
| Product designation | PPFM1010 |
| ABB order code | 1STQ007056A0000 |
| Product type | Front/rear plinth flange set |
| Component quantity | 2 flanges |
| Plinth position | Front/rear |
| Nominal plinth height | 100 mm |
| Nominal enclosure width | 1000 mm |
| Component function | Mechanical plinth base assembly |
| Compatible enclosure system | ABB System pro E power |
| Application | Low-voltage electrical distribution switchboard enclosures |
| Component category | Enclosure plinth accessories / front and rear flanges |
| Installation arrangement | Integration into a compatible System pro E power plinth assembly |
The ABB PPFM1010 (1STQ007056A0000) is a set of two front/rear plinth flanges used in compatible ABB System pro E power low-voltage switchboard enclosure base assemblies.
The manufacturer description specifies two front/rear plinth flanges for the designated System pro E power plinth configuration.
The PPFM1010 is specified for a 100 mm nominal plinth height. This dimension identifies the intended cabinet base configuration.
The PPFM1010 is designed for compatible ABB System pro E power enclosures with a nominal width of 1000 mm. The exact flange dimensions and fixing arrangement should be checked against the relevant ABB assembly documentation.
The product is identified as a set of two front/rear plinth flanges, not a complete plinth assembly. Additional components, such as compatible side sections and fixings, may be required depending on the selected cabinet configuration.
ABB System pro E power plinth accessories support electrical panel builders, switchboard manufacturers and industrial electrical contractors in constructing organised and dependable low-voltage distribution enclosures using coordinated modular cabinet base components.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.