Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ007055A0000 ABB PPFM1080 System Pro E Power 2 Front/Rear Plinth Flanges H100 W800
ABB PPFM1080 1STQ007055A0000 is a System Pro E Power set of two front/rear plinth flanges for compatible low-voltage switchboard enclosures with a nominal plinth height of 100 mm and width configuration of 800 mm.
£80.90
Why Choose the ABB PPFM1080 Front and Rear Plinth Flanges H100 W800?
The ABB 1STQ007055A0000, product reference PPFM1080, is a set of two front/rear plinth flanges designed for compatible ABB System Pro E Power low-voltage switchboard assemblies. Identified by the manufacturer as 2 F/R PLINTH FLANGES H=100MM W=800MM, these components are intended for the mechanical base arrangement of modular electrical distribution enclosures.
Part of the ABB System Pro E Power range, the PPFM1080 is specified for a nominal 100 mm plinth height and 800 mm width configuration. Its front/rear designation identifies the intended positions within a compatible switchboard plinth assembly, making it a relevant accessory for professional electrical panel builders and switchgear manufacturers.
The ABB PPFM1080 provides a manufacturer-designated solution for incorporating front and rear flange components into the appropriate enclosure base. The flanges form part of a mechanical plinth arrangement rather than a complete enclosure or electrical protection system. Their precise fixing geometry, supplied hardware and compatibility with other System Pro E Power accessories should be checked against ABB's applicable technical documentation.
Key Advantages
- Genuine ABB System Pro E Power plinth accessory for compatible low-voltage switchboard enclosures.
- Manufacturer-designated set of two front/rear plinth flanges.
- Specified for a nominal 100 mm plinth height.
- Designed for compatible 800 mm width configurations.
- Supports the construction of designated modular switchboard base arrangements.
- Provides application-specific components for front and rear plinth positions.
- Helps panel builders select the appropriate flange configuration for the intended cabinet dimensions.
- Designed for integration with compatible ABB System Pro E Power plinth and structural accessories.
- Suitable for new switchboard construction and compatible enclosure refurbishment projects.
- Supports consistent mechanical assembly using manufacturer-designated components.
Key Features
- ABB System Pro E Power product family.
- PPFM1080 manufacturer product reference.
- 1STQ007055A0000 ABB ordering code.
- 2 F/R PLINTH FLANGES H=100MM W=800MM official manufacturer designation.
- Set of two plinth flange components.
- F/R designation for front/rear plinth positions.
- 100 mm nominal plinth height.
- 800 mm nominal width configuration.
- Mechanical accessory for compatible switchboard plinth construction.
- Intended for integration with appropriately selected System Pro E Power enclosure components.
- Suitable for professional electrical panel-building and switchgear manufacturing applications.
Front and Rear Plinth Flanges for 800 mm Switchboard Base Configurations
The ABB System Pro E Power range provides modular enclosure and structural components for constructing low-voltage electrical distribution switchboards. Plinth accessories are used in compatible assemblies to establish the designated mechanical base arrangement beneath the cabinet structure.
The ABB PPFM1080 is specifically identified as two front/rear plinth flanges associated with a nominal 100 mm height and 800 mm width. These dimensions distinguish the product from alternative plinth configurations, including those intended for narrower cabinet arrangements. They should not automatically be interpreted as independently verified overall measurements of each individual flange.
The F/R designation identifies the front and rear positions associated with the plinth components. Correct installation depends on the selected enclosure structure, matching plinth accessories and the relevant ABB assembly instructions. The product designation alone does not confirm the inclusion of fixing hardware, corner elements, side components or other parts required to complete a plinth assembly.
These flanges are mechanical enclosure accessories rather than a complete plinth, switchboard enclosure or electrical protection device. Their designation does not independently establish an IP rating, mechanical load capacity, anchoring performance or electrical rating. The completed switchboard should be designed, assembled and verified in accordance with ABB's applicable instructions and the relevant requirements of the IEC 61439 series.
Typical Applications
- ABB System Pro E Power low-voltage switchboard plinth assemblies.
- Compatible enclosure bases with a 100 mm nominal plinth height.
- Compatible modular cabinets with an 800 mm nominal width configuration.
- Front and rear plinth flange integration in designated enclosure arrangements.
- Industrial electrical distribution cabinet construction.
- Commercial building low-voltage switchgear assemblies.
- Main and secondary power distribution switchboards.
- OEM electrical panel manufacturing and switchgear assembly.
- Compatible enclosure maintenance, replacement and refurbishment projects.
Technical Specifications
| Product group | System Pro E Power |
|---|---|
| ABB order code | 1STQ007055A0000 |
| Manufacturer product reference | PPFM1080 |
| Manufacturer designation | 2 F/R PLINTH FLANGES H=100MM W=800MM |
| Product type | Front/rear plinth flanges |
| Designated quantity | 2 flanges |
| Designated positions | Front and rear |
| Nominal plinth height | 100 mm |
| Nominal width configuration | 800 mm |
| Primary function | Mechanical integration within a compatible switchboard plinth arrangement |
| Compatible enclosure system | ABB System Pro E Power |
| Equipment category | Low-voltage switchboard plinth and enclosure accessories |
| Application | Compatible modular electrical enclosure base construction |
| Installation arrangement | Designated front/rear plinth positions |
Frequently Asked Questions
What is the ABB 1STQ007055A0000 PPFM1080 used for?
The ABB 1STQ007055A0000 PPFM1080 is a set of front/rear plinth flanges for compatible ABB System Pro E Power low-voltage switchboard enclosures. The flanges are intended for mechanical integration into the designated modular cabinet plinth arrangement.
How many plinth flanges are specified for the ABB PPFM1080?
The manufacturer's designation specifies two front/rear plinth flanges. The exact packaging contents and any separately required fixing hardware or additional plinth components should be confirmed against ABB's product documentation.
What dimensions are specified for the ABB PPFM1080 plinth flanges?
The manufacturer specifies a nominal 100 mm plinth height and 800 mm width configuration. These values identify the intended installation arrangement rather than independently verifying every physical dimension of the individual flanges.
What does F/R mean in the ABB PPFM1080 designation?
F/R identifies the front/rear positions associated with the plinth flanges. Their exact orientation, fixing points and connection requirements should be confirmed using the relevant ABB System Pro E Power assembly instructions.
Are the ABB PPFM1080 flanges compatible with every System Pro E Power cabinet?
No. The PPFM1080 flanges are designated for compatible System Pro E Power plinth arrangements with a nominal 100 mm height and 800 mm width. Compatibility depends on the selected enclosure configuration and corresponding plinth and structural components.
Designed for Professional Electrical Panel Builders
ABB System Pro E Power plinth accessories support professional electrical panel builders and switchgear manufacturers in constructing modular low-voltage distribution enclosures. The ABB 1STQ007055A0000 PPFM1080 provides two manufacturer-designated front/rear plinth flanges for compatible 100 mm high and 800 mm wide plinth configurations, supporting the assembly of the intended switchboard base arrangement.
