Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PPFM1075 1STQ007054A0000 is a System Pro E Power set of two front/rear plinth flanges for compatible low-voltage switchboard enclosures with a nominal plinth height of 100 mm and width configuration of 750 mm.
£100.66
The ABB 1STQ007054A0000, product reference PPFM1075, is a set of two front/rear plinth flanges designed for compatible ABB System Pro E Power low-voltage switchboard assemblies. Identified by the manufacturer as 2 F/R PLINTH FLANGES H=100MM W=750MM, this accessory is intended for the plinth arrangement of modular electrical distribution enclosures.
Part of the ABB System Pro E Power range, the PPFM1075 is specified for a nominal 100 mm plinth height and 750 mm width configuration. Its front/rear designation identifies the intended plinth positions, making it relevant to professional panel builders constructing compatible switchboard base assemblies.
The ABB PPFM1075 provides a manufacturer-designated solution for incorporating front and rear plinth flange components into the appropriate enclosure configuration. These are mechanical enclosure accessories, not electrical protection devices or a complete plinth assembly. The precise supplied contents, fixing arrangement and compatibility with other System Pro E Power components should be confirmed against ABB's applicable technical documentation.
The ABB System Pro E Power range provides modular components for constructing low-voltage electrical distribution switchboards. Plinth accessories form part of the mechanical base arrangement of compatible enclosures, allowing panel builders to assemble the designated cabinet configuration using appropriately selected structural components.
The ABB PPFM1075 is specifically identified as two front/rear plinth flanges for a nominal 100 mm height and 750 mm width. These values help distinguish the accessory from alternative plinth configurations. They should be understood as manufacturer-designated installation dimensions rather than independently verified overall measurements of each flange.
The F/R designation identifies the intended front and rear positions within the plinth arrangement. Correct installation depends on the associated enclosure dimensions, matching plinth components and ABB's specified connection details. The designation does not establish whether fixing hardware or other plinth parts are included.
These flanges are mechanical enclosure components rather than a complete plinth, enclosure or electrical protection device. Their product designation does not independently establish an enclosure IP rating, mechanical load capacity, anchoring performance or electrical rating. The completed switchboard should be assembled and verified in accordance with ABB's applicable instructions and the relevant requirements of the IEC 61439 series.
| Product group | System Pro E Power |
|---|---|
| ABB order code | 1STQ007054A0000 |
| Manufacturer product reference | PPFM1075 |
| Manufacturer designation | 2 F/R PLINTH FLANGES H=100MM W=750MM |
| Product type | Front/rear plinth flanges |
| Designated quantity | 2 flanges |
| Designated positions | Front and rear |
| Nominal plinth height | 100 mm |
| Nominal width configuration | 750 mm |
| Primary function | Mechanical integration within a compatible switchboard plinth arrangement |
| Compatible enclosure system | ABB System Pro E Power |
| Equipment category | Low-voltage switchboard plinth and enclosure accessories |
| Application | Compatible modular electrical enclosure base construction |
| Installation arrangement | Designated front/rear plinth positions |
The ABB 1STQ007054A0000 PPFM1075 is a set of front/rear plinth flanges for compatible ABB System Pro E Power low-voltage switchboard enclosures. The flanges are intended for mechanical integration into the designated modular cabinet plinth arrangement.
The manufacturer's designation specifies two front/rear plinth flanges. The exact packaging contents and any separately required fixing hardware or additional plinth components should be confirmed against ABB's product documentation.
The manufacturer specifies a nominal 100 mm plinth height and 750 mm width configuration. These values identify the intended installation arrangement rather than independently verifying every physical dimension of the individual flanges.
F/R identifies the front/rear positions associated with the plinth flanges. Their exact orientation, fixing points and connection requirements should be confirmed using the relevant ABB System Pro E Power assembly instructions.
No. The PPFM1075 flanges are designated for compatible System Pro E Power plinth arrangements with a nominal 100 mm height and 750 mm width. Compatibility depends on the selected enclosure configuration and corresponding plinth and structural components.
ABB System Pro E Power plinth accessories support professional electrical panel builders and switchgear manufacturers in constructing modular low-voltage distribution enclosures. The ABB 1STQ007054A0000 PPFM1075 provides two manufacturer-designated front/rear plinth flanges for compatible 100 mm high and 750 mm wide plinth configurations, supporting the assembly of the intended switchboard base arrangement.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.