Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ007050A0000 ABB PPFM1030 System pro E Power 2 Front/Rear/Side Plinth Flanges H100 W/D300
ABB PPFM1030 is a System pro E power kit containing two front, rear or side plinth flanges for compatible low-voltage switchgear enclosures with a 100 mm plinth height and 300 mm width or depth configuration.
£47.78
Why Choose the ABB PPFM1030 System pro E Power Plinth Flange Kit?
The ABB PPFM1030 is a dedicated plinth flange kit from the ABB System pro E power range, comprising 2 front/rear/side (F/R/S) plinth flanges for compatible low-voltage switchgear enclosures. The flanges are specified for a 100 mm plinth height and a 300 mm enclosure width or depth, providing a manufacturer-defined accessory for modular switchboard base construction.
Designed for integration into compatible ABB System pro E power structures, the PPFM1030 supports the assembly and finishing of plinth arrangements beneath electrical distribution cabinets. Its front, rear or side application provides flexibility when selecting the correct flange components for the intended enclosure configuration.
Identified by ABB order code 1STQ007050A0000, the PPFM1030 is suitable for professional electrical panel builders, switchgear manufacturers and maintenance engineers working with compatible System pro E power enclosures. Its two-piece configuration and specified dimensions make it an identifiable accessory for new installations, structural assembly and replacement requirements.
Key Advantages
- Set of 2 plinth flanges for compatible ABB System pro E power enclosures.
- Suitable for front, rear or side (F/R/S) plinth applications.
- Designed for a 100 mm nominal plinth height.
- Specified for 300 mm enclosure width or depth arrangements.
- Supports consistent construction of modular switchboard plinth assemblies.
- Helps complete the base arrangement of compatible electrical distribution cabinets.
- Suitable for switchboard manufacturing, installation and refurbishment.
- Genuine ABB accessory identified by order code 1STQ007050A0000.
Key Features
- ABB PPFM1030 plinth flange kit.
- System pro E power product series.
- 2 plinth flanges per specified kit.
- Front/rear/side (F/R/S) configuration.
- 100 mm nominal plinth height.
- 300 mm nominal width/depth configuration.
- Designed for compatible modular low-voltage switchgear enclosures.
- Supports plinth construction and enclosure base finishing.
- Suitable for professional electrical distribution cabinet assembly.
- Manufacturer order code 1STQ007050A0000.
Technical Specifications
- Manufacturer: ABB
- Series: System pro E power
- Model: PPFM1030
- ABB order code: 1STQ007050A0000
- Product type: Plinth flange kit
- Component description: 2 F/R/S plinth flanges H=100 mm W/D=300 mm
- Quantity: 2 flanges
- Installation position: Front / rear / side
- Nominal plinth height: 100 mm
- Nominal enclosure width/depth: 300 mm
- Application: Switchgear enclosure plinth assembly
- Product group: System Pro E Power
- System compatibility: ABB System pro E power
- Component classification: Switchgear plinth and enclosure accessory
Practical Plinth Assembly for Modular Electrical Enclosures
Plinth components form part of the base structure of many floor-standing electrical distribution cabinets. They are used to construct and finish the lower enclosure arrangement, supporting an organised installation and providing a coordinated interface between compatible cabinet structures and their plinth assemblies.
The ABB PPFM1030 is specifically identified as a set of two front/rear/side plinth flanges for a 100 mm high plinth and a 300 mm width or depth configuration. This specification allows electrical panel builders to select the appropriate flange kit for the intended System pro E power enclosure arrangement.
The ABB System pro E power platform includes modular enclosure structures, plinth accessories, internal mounting systems and components for low-voltage electrical distribution. Using compatible accessories helps maintain consistency across switchboard construction, particularly where multiple cabinet sections or specific base configurations are required.
The PPFM1030 is a plinth accessory rather than a complete plinth or electrical enclosure. Compatibility with the selected cabinet, plinth corner components and associated fixing arrangements should be checked against the applicable ABB installation documentation. The overall mechanical performance and installation suitability depend on the completed assembly.
Typical Applications
- ABB System pro E power enclosure plinth assemblies.
- Front plinth flange installation on compatible switchgear cabinets.
- Rear plinth flange installation on compatible enclosure bases.
- Side plinth flange arrangements where specified.
- Industrial low-voltage main distribution boards.
- Commercial electrical distribution cabinets.
- Professional switchboard manufacturing and panel building.
- Maintenance and refurbishment of compatible enclosure plinth components.
Frequently Asked Questions
What is the ABB PPFM1030 used for?
The ABB PPFM1030 is a two-piece plinth flange kit used in compatible ABB System pro E power switchgear enclosure base assemblies. It is specified for front, rear or side plinth applications.
How many plinth flanges are included in the ABB PPFM1030 kit?
The PPFM1030 is specified as a kit containing 2 plinth flanges.
What dimensions does the ABB PPFM1030 support?
The kit is designed for a 100 mm nominal plinth height and a 300 mm enclosure width or depth configuration.
Can the ABB PPFM1030 be used at the front, rear or side of an enclosure?
Yes. The product is identified as a front/rear/side (F/R/S) plinth flange kit. The appropriate installation position depends on the compatible System pro E power enclosure and plinth configuration.
What is the ABB order code for the PPFM1030?
The manufacturer's order code is 1STQ007050A0000, identifying the ABB PPFM1030 set of two plinth flanges for a 100 mm high and 300 mm wide/deep configuration.
Trusted ABB Accessories for Professional Switchboard Construction
ABB System pro E power enclosure accessories support the modular construction and finishing of industrial and commercial low-voltage switchboards. The ABB PPFM1030 provides two dedicated front/rear/side plinth flanges for compatible 100 mm high and 300 mm wide/deep arrangements, supporting consistent enclosure base assembly and professional electrical panel construction.
