Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PCFM1250 1STQ007044A0000 is a System pro E power accessory comprising a designated set of four galvanised sheet crosspieces for compatible low-voltage switchboard assemblies with a nominal width configuration of 1250 mm.
£251.25
The ABB PCFM1250, manufacturer order code 1STQ007044A0000, is a set of four galvanised sheet crosspieces from the ABB System pro E power range of low-voltage switchgear and enclosure accessories. Identified by the authoritative manufacturer designation 4 GALVANIZ. SHEET CROSSPIECES W=1250MM, this product is specified for a nominal width of 1250 mm.
Crosspieces are mechanical components used within electrical enclosure and switchboard construction to support the intended assembly arrangement. The ABB PCFM1250 provides a manufacturer-defined crosspiece solution for compatible System pro E power configurations, helping panel builders select the appropriate structural accessories for their switchgear projects.
The product's galvanised sheet construction, four-crosspiece designation and 1250 mm width reference make it a clearly identified accessory for professional low-voltage distribution assemblies. As with other modular switchgear components, correct selection depends on the intended enclosure configuration and the applicable ABB assembly documentation.
Low-voltage switchboards use coordinated mechanical components to form enclosure structures and accommodate electrical equipment. Crosspieces are among the accessories that may be required to establish the intended mechanical arrangement of a modular assembly. Selecting the correct manufacturer-specific components helps ensure that the completed switchboard follows its designated construction system.
The ABB PCFM1250 is specified as four galvanised sheet crosspieces with a 1250 mm width designation. The galvanised sheet description identifies the manufacturer's stated material and surface treatment, while the width reference establishes the relevant configuration. The designation alone does not confirm the cross-sectional profile, sheet thickness, individual crosspiece dimensions or exact mounting geometry.
Before installation, verify the intended enclosure width, compatible frame arrangement, fixing requirements and any additional accessories using the applicable ABB System pro E power catalogue and assembly instructions. The 1250 mm designation should not be assumed to represent a measured external length of each individual crosspiece without reference to ABB technical drawings. Mechanical performance and enclosure protection characteristics must be assessed for the complete assembled system.
| Series | System pro E power |
|---|---|
| ABB order code | 1STQ007044A0000 |
| Manufacturer part number | 1STQ007044A0000 |
| Product type | Galvanised sheet crosspieces |
| Manufacturer designation | 4 GALVANIZ. SHEET CROSSPIECES W=1250MM |
| Crosspiece quantity designation | 4 |
| Material description | Galvanised sheet |
| Nominal width | 1250 mm |
| System compatibility | ABB System pro E power, subject to the designated assembly configuration |
| Application | Mechanical construction of compatible low-voltage switchboards and electrical enclosures |
| Accessory function | Crosspiece components for designated modular enclosure arrangements |
The ABB PCFM1250, order code 1STQ007044A0000, is a galvanised sheet crosspiece accessory for compatible ABB System pro E power low-voltage switchboard assemblies. It is intended for designated mechanical enclosure construction arrangements.
The manufacturer's designation states 4 GALVANIZ. SHEET CROSSPIECES, identifying a four-crosspiece product configuration. The exact packaging and any additional included fixing components should be confirmed against ABB's official product documentation.
The manufacturer specifies W=1250MM, corresponding to a nominal width of 1250 mm. This identifies the intended configuration and should not be treated as confirmation of each crosspiece's exact external dimensions without checking ABB technical drawings.
Yes. The authoritative manufacturer description identifies the components as galvanised sheet crosspieces. The specific sheet grade, coating thickness and corrosion-resistance classification are not established by the abbreviated designation and should be verified if required for the application.
No universal compatibility is established by the product designation. The PCFM1250 belongs to the ABB System pro E power product group and is specified for a 1250 mm width configuration. Compatibility with a particular enclosure, frame or assembly should be checked against ABB's applicable technical catalogue before ordering.
ABB System pro E power provides a modular platform for professional low-voltage switchgear and electrical distribution construction. The PCFM1250 galvanised sheet crosspiece accessory, order code 1STQ007044A0000, offers a manufacturer-defined four-crosspiece arrangement for compatible 1250 mm width configurations, supporting coordinated mechanical assembly within appropriately engineered switchboard installations.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.