1STQ007039A0000 ABB PCFM0500 Set of 4 Galvanised Sheet Crosspieces W/D 500 mm System pro E Power

Why Choose the ABB PCFM0500 Galvanised Sheet Crosspieces 500 mm?

The ABB PCFM0500, manufacturer order code 1STQ007039A0000, is a set of four galvanised sheet crosspieces for compatible low-voltage electrical distribution switchboards within the ABB System pro E Power range. Identified by the authoritative manufacturer designation 4 GALVANIZ.SHEET CROSSPIECES W/D=500MM, this mechanical accessory set is specified for a nominal 500 mm width/depth configuration.

Designed for professional electrical switchboard construction, the ABB PCFM0500 provides manufacturer-specified crosspieces for designated modular assembly arrangements. Crosspieces are transverse mechanical elements used in switchboard structures to connect, position or support compatible framework components according to the applicable assembly design.

The galvanised sheet construction identified in the product designation provides a protective metallic surface finish suited to the manufacturer's intended mechanical applications. Galvanising generally helps resist corrosion under appropriate conditions, although the exact coating specification and environmental suitability must be confirmed from ABB technical documentation.

With four crosspieces identified in the manufacturer designation and a 500 mm W/D reference, the ABB PCFM0500 supports accurate structural component selection for compatible System pro E Power installations. Its dedicated model and order code help panel builders distinguish it from other crosspiece sets intended for different nominal dimensions.

Key Advantages

• Genuine ABB System pro E Power mechanical switchboard accessory.
• Manufacturer designation specifies a set of four galvanised sheet crosspieces.
• Designed for compatible 500 mm width/depth assembly configurations.
• Galvanised sheet finish helps provide corrosion resistance under suitable service conditions.
• Supports organised mechanical framework construction in modular switchboards.
• Provides transverse structural elements for designated ABB assembly arrangements.
• Dedicated PCFM0500 model reference supports accurate product identification.
• Designed for integration with appropriate ABB System pro E Power structural components.
• Relevant to professional industrial and commercial low-voltage distribution installations.
• Manufacturer order code 1STQ007039A0000 simplifies specification, procurement and maintenance identification.

Key Features

• ABB manufacturer model: PCFM0500.
• ABB order code: 1STQ007039A0000.
• Product group: System pro E Power.
• Exact manufacturer designation: 4 GALVANIZ.SHEET CROSSPIECES W/D=500MM.
• Product type: Galvanised sheet crosspiece set.
• Quantity: Four crosspieces.
• Nominal W/D configuration: 500 mm.
• Material and finish description: Galvanised sheet.
• Mechanical accessory for compatible modular electrical switchboard structures.
• Intended for designated transverse framework arrangements.
• Designed for use with appropriate ABB supporting and fixing components.
• Manufacturer-defined configuration for accurate accessory selection.

Galvanised Crosspieces for ABB System pro E Power Switchboard Construction

The ABB PCFM0500 crosspiece set is intended for compatible mechanical assembly arrangements within the System pro E Power switchboard platform. Modular low-voltage distribution assemblies combine structural members, supporting elements, enclosure components and mounting accessories to establish the framework required for electrical equipment installation.

Crosspieces can serve as transverse mechanical members within a switchboard structure. Their exact installation positions and mechanical functions depend on the relevant ABB assembly configuration. The PCFM0500 should therefore be selected and installed according to the manufacturer's applicable drawings and assembly instructions rather than on nominal dimensions alone.

The product designation explicitly identifies four galvanised sheet crosspieces. Galvanised sheet commonly incorporates a zinc-based protective coating that helps resist corrosion. However, the designation does not establish the underlying sheet thickness, galvanising method, coating mass, mechanical load capacity or corrosion-resistance classification.

The W/D=500MM reference is an important distinction. It indicates a manufacturer-specified 500 mm width/depth configuration, rather than independently confirming that each crosspiece measures exactly 500 mm from end to end. The applicable width or depth orientation, physical dimensions, hole positions and fixing geometry must be verified against the relevant ABB technical documentation.

The ABB System pro E Power range supports modular low-voltage main distribution switchboard construction for industrial and commercial environments. The PCFM0500 is a mechanical accessory set, not a busbar, conductor, circuit breaker or electrical protective device. Its designation does not establish an electrical current rating, short-circuit withstand rating or ingress protection classification for the completed assembly.

Selecting the Correct 500 mm Width/Depth Crosspiece Set

When specifying the ABB PCFM0500, panel builders should confirm that the intended switchboard assembly requires the manufacturer's W/D=500MM configuration. The W/D notation should be retained in procurement and assembly documentation because it is part of the authoritative ABB product designation.

The PCFM0500 model and 1STQ007039A0000 order code should be matched against the appropriate System pro E Power bill of materials and structural assembly drawings. A nominal 500 mm reference alone does not establish universal compatibility with every ABB switchboard enclosure, structural frame or mounting arrangement.

The designation specifies a quantity of four crosspieces, but it does not confirm whether fixing screws, brackets, washers or additional assembly hardware are supplied. Any complementary components should be identified from the relevant ABB installation instructions before ordering.

For reliable installation, the complete assembly should be assessed for mechanical stability, correct fixing positions, equipment clearances and the required enclosure performance. Structural accessory selection must remain consistent with the manufacturer's approved switchboard configuration and applicable electrical assembly requirements.

Typical Applications

• ABB System pro E Power low-voltage main distribution switchboards.
• Compatible 500 mm width/depth structural configurations.
• Modular electrical switchboard framework construction.
• Industrial low-voltage electrical distribution cabinets.
• Commercial building electrical distribution switchboards.
• Transverse structural arrangements within compatible ABB assemblies.
• OEM electrical panel building and switchgear manufacturing.
• Electrical infrastructure and industrial power distribution projects.
• Assembly of compatible internal framework and supporting components.
• Maintenance, modification and refurbishment of compatible System pro E Power installations.