Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PCFM0400, order code 1STQ007038A0000, is a set of four galvanised sheet crosspieces specified for a nominal width of 400 mm and intended for compatible ABB System pro E Power low-voltage switchboard structural arrangements.
£70.34
The ABB PCFM0400, manufacturer order code 1STQ007038A0000, is a set of four galvanised sheet crosspieces designed for compatible low-voltage electrical distribution switchboards within the ABB System pro E Power range. Identified by the authoritative manufacturer designation 4 GALVANIZ. SHEET CROSSPIECES W=400MM, this accessory set provides four mechanical crosspieces specified for a nominal width of 400 mm.
Designed for professional electrical panel building, the ABB PCFM0400 supports the construction of compatible modular switchboard structures. Crosspieces are used in mechanical assembly arrangements to provide transverse structural elements and help establish the required framework for associated enclosure and internal mounting components.
The galvanised sheet construction identified in the manufacturer designation makes these crosspieces suitable for the intended ABB mechanical assembly applications. Galvanising provides a protective zinc-based surface finish that helps resist corrosion under appropriate service conditions. The actual environmental suitability of the completed switchboard depends on the overall enclosure design and installation environment.
Supplied as a four-crosspiece set, the ABB PCFM0400 offers a manufacturer-specified solution for compatible 400 mm width arrangements. Its dedicated product designation and order code help switchboard manufacturers, electrical contractors and maintenance professionals select the correct structural accessories for ABB System pro E Power installations.
The ABB PCFM0400 crosspiece set is intended for compatible mechanical assembly arrangements within the System pro E Power switchboard platform. Modular electrical distribution assemblies use structural elements, supporting members, enclosure components and mounting accessories to create the framework required for the installation of electrical distribution equipment.
Crosspieces are transverse mechanical members that can form part of a switchboard's supporting arrangement. Depending on the specific assembly design, such components may contribute to the positioning and connection of compatible structural elements. The exact mechanical role, fixing locations and installation sequence of the ABB PCFM0400 must be established from the applicable ABB assembly instructions.
The manufacturer identifies this product as four galvanised sheet crosspieces. Galvanised sheet typically features a protective zinc-based coating intended to help resist corrosion. However, the product designation does not establish the sheet thickness, coating mass, specific galvanising process or corrosion-resistance classification. These characteristics should not be assumed without the relevant manufacturer documentation.
The W=400MM reference specifies a nominal width of 400 mm. This identifies the intended width configuration but does not necessarily represent the exact end-to-end measurement of each crosspiece. The physical dimensions, hole positions, fixing arrangements and compatibility with individual structural members should be verified using ABB technical drawings.
The ABB System pro E Power range supports modular low-voltage main distribution switchboard construction for industrial and commercial applications. The PCFM0400 is a mechanical accessory set rather than an electrical protective device, busbar, conductor or switching component. It does not independently establish the current rating, short-circuit withstand capability or degree of ingress protection of the completed assembly.
When specifying the ABB PCFM0400, panel builders should confirm that the intended switchboard structure requires four galvanised sheet crosspieces for the manufacturer's 400 mm width configuration. Correct identification is particularly important where a modular switchboard design incorporates structural members of different lengths, widths or mounting arrangements.
The manufacturer model PCFM0400 and order code 1STQ007038A0000 should be checked against the relevant System pro E Power bill of materials and assembly drawings. A matching nominal width alone does not establish compatibility with every ABB enclosure, crosspiece fixing position or internal switchboard arrangement.
Before installation, the required complementary fixing components, structural supports and assembly sequence should be verified. Although the manufacturer designation specifies four crosspieces, it does not confirm the inclusion of screws, brackets, washers or other mounting hardware.
The completed switchboard should be assembled according to ABB's applicable technical instructions and the requirements of the finished low-voltage electrical assembly. Mechanical stability, equipment clearances and enclosure performance must be assessed at the complete assembly level.
| Product model | PCFM0400 |
|---|---|
| Product group | System pro E Power |
| ABB order code | 1STQ007038A0000 |
| Manufacturer part number | 1STQ007038A0000 |
| Product designation | 4 GALVANIZ. SHEET CROSSPIECES W=400MM |
| Product type | Galvanised sheet crosspieces |
| Accessory category | Switchboard structural and mechanical assembly accessories |
| Number of crosspieces | 4 |
| Nominal width | 400 mm |
| Material / finish description | Galvanised sheet |
| Compatible switchboard range | ABB System pro E Power |
| Primary application | Compatible switchboard structural arrangements |
| Primary function | Transverse mechanical components for designated switchboard assemblies |
| System application | Low-voltage electrical distribution switchboards |
The ABB PCFM0400, order code 1STQ007038A0000, is a set of four galvanised sheet crosspieces for compatible ABB System pro E Power switchboards. The crosspieces are mechanical accessories intended for designated structural assembly arrangements.
The manufacturer's designation 4 GALVANIZ. SHEET CROSSPIECES W=400MM specifies four galvanised sheet crosspieces. The inclusion of any additional fixing hardware is not established by the designation and should be confirmed before ordering.
The ABB PCFM0400 is specified for a nominal width of 400 mm. This is the manufacturer's stated width configuration and should not automatically be interpreted as the exact physical length of each crosspiece. Detailed dimensions and fixing positions should be confirmed using ABB technical drawings.
Yes. The manufacturer designation explicitly identifies the product as galvanised sheet crosspieces. The galvanised finish provides a protective surface treatment, but the specific coating specification and environmental suitability should be verified against ABB's technical documentation.
The ABB PCFM0400 belongs to the System pro E Power product group and is intended for compatible 400 mm width structural arrangements. It should not be assumed to fit every System pro E Power configuration. The exact structural layout, fixing arrangements and required accessories must be checked against ABB's assembly instructions.
ABB System pro E Power accessories support the construction of modular low-voltage electrical distribution switchboards for industrial and commercial applications. The ABB PCFM0400 galvanised sheet crosspiece set, order code 1STQ007038A0000, provides four manufacturer-specified crosspieces for compatible 400 mm width structural arrangements, supporting accurate component selection, organised assembly and professional switchboard construction.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.