Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB 1STQ006923B0000 is a System Pro E Power two-anchoring-plate accessory designated for compatible T6, T7 and E1.2 circuit-breaker installations with nominal 400 mm and 500 mm height configurations and manufacturer reference (70).
£107.20
The ABB 1STQ006923B0000 is a dedicated anchoring plate accessory for compatible ABB System Pro E Power low-voltage switchboard assemblies. Identified by the manufacturer as N.2 ANCH.PL.T6-T7-E1.2 H=400/500 (70), this product is associated with the mounting arrangements for specified ABB T6, T7 and E1.2 circuit-breaker equipment.
Part of the ABB System Pro E Power range, the accessory is intended for professional electrical panel builders, switchgear manufacturers and industrial power distribution specialists. The designation identifies two anchoring plates for the specified equipment families and installation configurations, helping panel builders select the appropriate mechanical mounting components for compatible switchboard assemblies.
The manufacturer designation includes H=400/500, indicating nominal installation height configurations of 400 mm and 500 mm, together with the additional reference (70). The exact significance of the 70 reference, fixing geometry and compatible circuit-breaker arrangements should be confirmed against ABB's applicable technical drawings and assembly instructions.
The ABB System Pro E Power range provides a modular platform for constructing low-voltage electrical distribution switchboards. Circuit-breaker installation accessories form part of the mechanical assembly, helping integrate compatible protective equipment into the intended enclosure structure.
The ABB 1STQ006923B0000 is designated as an anchoring plate accessory for T6, T7 and E1.2 equipment arrangements. Anchoring plates are mechanical installation components used to establish specified fixing or support interfaces within an assembly. Their suitability depends on the circuit-breaker configuration, supporting structure and corresponding ABB installation instructions.
The designation H=400/500 identifies nominal 400 mm and 500 mm installation height configurations. The additional (70) reference should be retained when checking the correct accessory against ABB's technical documentation. It should not be assumed to represent plate thickness, fixing pitch or another physical measurement without manufacturer confirmation.
This accessory is not a circuit-breaker or an independent electrical protection device. It does not establish a rated current, breaking capacity, short-circuit withstand rating or enclosure ingress protection classification. These characteristics depend on the selected electrical equipment and completed switchboard assembly. Installation and verification should follow ABB's applicable instructions and the relevant requirements of the IEC 61439 series.
| Product group | System Pro E Power |
|---|---|
| ABB order code | 1STQ006923B0000 |
| Manufacturer designation | N.2 ANCH.PL.T6-T7-E1.2 H=400/500 (70) |
| Product type | Circuit-breaker anchoring plate accessory |
| Designated quantity | 2 anchoring plates |
| Associated equipment | ABB T6, T7 and E1.2 |
| First nominal installation height | 400 mm |
| Second nominal installation height | 500 mm |
| Additional manufacturer reference | (70) |
| Primary function | Mechanical anchoring within the designated switchboard installation |
| Compatible enclosure system | ABB System Pro E Power |
| Equipment category | Low-voltage switchboard mounting accessories |
| Application | Compatible circuit-breaker installation and mechanical support arrangements |
| Installation location | Within a compatible modular switchboard assembly |
The ABB 1STQ006923B0000 is an anchoring plate accessory for compatible ABB System Pro E Power low-voltage switchboards. It is designated for mechanical installation arrangements associated with ABB T6, T7 and E1.2 circuit-breaker equipment.
The manufacturer's N.2 ANCH.PL. designation identifies two anchoring plates. The precise supplied contents, fixing hardware and any additional required mounting accessories should be confirmed against the applicable ABB product documentation.
The H=400/500 designation identifies nominal installation height configurations of 400 mm and 500 mm. These values should not be interpreted as independently verified overall dimensions of the individual anchoring plates.
The (70) reference is part of ABB's manufacturer designation for this accessory. Its precise technical meaning should be verified using the relevant ABB product drawings or installation documentation rather than assumed to represent a particular plate dimension or fixing measurement.
No. Although the designation identifies T6, T7 and E1.2 equipment families, compatibility depends on the specific circuit-breaker arrangement, switchboard structure, nominal installation height and associated mounting components. The complete configuration should be checked against ABB's technical documentation.
ABB System Pro E Power mounting accessories support professional electrical panel builders and switchgear manufacturers in integrating compatible circuit-breaker equipment into modular low-voltage distribution assemblies. The ABB 1STQ006923B0000 provides a manufacturer-designated two-anchoring-plate solution for specified T6, T7 and E1.2 arrangements associated with nominal 400 mm and 500 mm installation heights.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.