1STQ006911B0000 ABB P3 Cubicle H600 W600 System pro E Power

Why Choose the ABB 1STQ006911B0000 P3 Cubicle 600 × 600 mm?

The ABB 1STQ006911B0000 is a dedicated P3 cubicle component for compatible low-voltage electrical distribution switchboards within the ABB System pro E Power range. Identified by the authoritative manufacturer designation CUBICLE P3 H=600MM W=600MM, this accessory is specified for a cubicle arrangement with a nominal height of 600 mm and width of 600 mm.

Designed for professional electrical panel building, the ABB 1STQ006911B0000 supports the construction and organisation of internal cubicle arrangements within compatible System pro E Power switchboards. Cubicle components contribute to the mechanical structure of modular electrical distribution assemblies, helping panel builders establish designated installation spaces and coordinate the positioning of associated structural and mounting accessories.

The manufacturer's P3 designation identifies a particular ABB cubicle configuration and is an important reference when selecting complementary switchboard components. With its specified 600 mm × 600 mm format, the ABB 1STQ006911B0000 is intended for appropriately configured industrial and commercial low-voltage distribution assemblies.

The dedicated manufacturer order code 1STQ006911B0000 enables accurate product identification during specification, procurement, installation planning and maintenance. It distinguishes this cubicle from other System pro E Power P3 configurations with different height and width requirements.

Key Advantages

• Purpose-designed P3 cubicle component for ABB System pro E Power switchboards.
• Specified for a 600 mm nominal height and 600 mm nominal width.
• Supports organised internal switchboard construction and cubicle layout planning.
• Dedicated P3 configuration reference assists accurate accessory selection.
• Designed for integration with compatible ABB modular switchboard structures.
• Provides a manufacturer-identified component for designated cubicle arrangements.
• Supports professional industrial and commercial low-voltage distribution installations.
• Helps panel builders maintain consistent component identification across assembly projects.
• Suitable for appropriately specified new installations and compatible switchboard modifications.
• Dedicated ABB order code simplifies procurement and replacement component identification.

Key Features

• ABB System pro E Power modular switchboard accessory.
• ABB manufacturer order code 1STQ006911B0000.
• Manufacturer designation: CUBICLE P3 H=600MM W=600MM.
• P3 cubicle configuration.
• 600 mm nominal height.
• 600 mm nominal width.
• Specified square-format height and width configuration.
• Designed for compatible low-voltage electrical distribution switchboard assemblies.
• Mechanical cubicle component for modular switchboard construction.
• Intended for integration with appropriate ABB structural and mounting accessories.
• Supports the arrangement of designated internal switchboard spaces.
• Application-specific accessory for professional electrical panel building.

P3 Cubicle Integration in ABB System pro E Power Switchboards

The ABB 1STQ006911B0000 P3 cubicle is intended for compatible mechanical arrangements within the System pro E Power switchboard platform. Modular electrical distribution assemblies use combinations of enclosure structures, internal supports, mounting accessories and cubicle components to establish the required installation layout for electrical equipment.

The ABB System pro E Power range provides a modular platform for low-voltage main distribution switchboards used in industrial and commercial environments. Different equipment arrangements and compartment configurations require appropriately selected mechanical components. The ABB 1STQ006911B0000 is a cubicle accessory rather than a complete switchboard, circuit breaker or independent electrical protective device.

The manufacturer's designation specifies a 600 mm high by 600 mm wide P3 cubicle. This equal-height-and-width configuration provides a clear dimensional reference when planning the associated switchboard arrangement. However, the stated dimensions do not establish the cubicle depth, exact external measurements, usable internal space or available equipment mounting clearances.

The P3 reference is an essential part of the manufacturer's product identification. It should not automatically be interpreted as an ingress protection rating, a particular form of internal separation or a universal equipment compatibility classification. Its precise technical meaning and associated assembly requirements should be verified against the relevant ABB System pro E Power instructions.

Correct installation requires confirmation of the intended cubicle position, compatible supporting structure, complementary accessories and equipment arrangement. The completed electrical distribution assembly must also satisfy applicable requirements for mechanical construction, electrical clearances, accessibility and enclosure protection.

Selecting the Correct 600 mm P3 Cubicle Configuration

When specifying the ABB 1STQ006911B0000, panel builders should confirm that the required cubicle configuration is P3 and that the intended assembly calls for a 600 mm nominal height and 600 mm nominal width. Matching these designation details is important because System pro E Power switchboards can incorporate multiple cubicle sizes and mechanical configurations.

The 600 mm height and width distinguish this product from smaller or differently proportioned P3 cubicle variants. The nominal dimensions provide a useful starting point for component selection, but they do not independently confirm compatibility with a particular circuit breaker, control device, distribution component or mounting accessory.

The manufacturer's order code should be checked against the applicable switchboard assembly drawings, installation instructions and bill of materials. Any required fixing hardware, supporting components or additional accessories should be identified separately, as the abbreviated product designation does not specify the complete package contents.

For applications requiring specific forms of internal separation, enclosure protection or equipment accessibility, these characteristics must be evaluated at the complete switchboard assembly level. The cubicle designation alone does not establish an electrical current rating, short-circuit withstand rating or IP classification.

Typical Applications

• ABB System pro E Power low-voltage main distribution switchboards.
• Compatible P3 cubicle and compartment arrangements.
• Modular electrical distribution board construction.
• Industrial electrical switchgear assembly projects.
• Commercial building electrical distribution installations.
• Switchboard layouts requiring a 600 mm × 600 mm P3 cubicle configuration.
• Internal switchboard compartment organisation.
• OEM electrical panel building and switchgear manufacturing.
• Electrical infrastructure and industrial power distribution projects.
• Compatible switchboard modifications, maintenance and refurbishment installations.