Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ006900B0000 ABB P3 Cubicle H300 W400 System pro E Power
ABB 1STQ006900B0000 is a System pro E Power P3 cubicle component with a nominal height of 300 mm and width of 400 mm, intended for compatible modular low-voltage electrical distribution switchboard arrangements.
£212.42
Why Choose the ABB 1STQ006900B0000 P3 Cubicle 300 × 400 mm?
The ABB 1STQ006900B0000 is a dedicated P3 cubicle component for compatible low-voltage electrical distribution switchboards within the ABB System pro E Power range. Identified by the authoritative manufacturer designation CUBICLE P3 H=300MM W=400MM, this accessory is specified for a cubicle arrangement with a nominal height of 300 mm and width of 400 mm.
Designed for professional electrical panel building, the ABB 1STQ006900B0000 supports the construction of organised internal cubicle arrangements within compatible System pro E Power assemblies. Cubicle components contribute to the mechanical layout of modular switchboards, helping manufacturers establish designated installation spaces and coordinate associated structural and mounting accessories.
The manufacturer's P3 designation identifies a specific ABB cubicle configuration and should be retained when selecting complementary components. With its specified 300 mm × 400 mm format, this cubicle accessory is suitable for appropriately configured industrial and commercial electrical distribution assemblies.
The dedicated ABB order code 1STQ006900B0000 provides accurate product identification for procurement, installation planning and maintenance. It distinguishes this 300 mm high configuration from other P3 cubicle variants in the System pro E Power range.
Key Advantages
- Purpose-designed P3 cubicle component for ABB System pro E Power switchboards.
- Specified for a 300 mm nominal height and 400 mm nominal width.
- Supports organised internal switchboard construction and compartment planning.
- Dedicated P3 configuration reference assists accurate component selection.
- Designed for integration with compatible ABB modular switchboard structures.
- Provides a manufacturer-identified component for designated cubicle arrangements.
- Supports professional industrial and commercial low-voltage distribution installations.
- Helps panel builders maintain consistent component identification across assembly projects.
- Suitable for appropriately specified new installations and switchboard modifications.
- Dedicated ABB order code simplifies procurement and identification of replacement components.
Key Features
- ABB System pro E Power modular switchboard accessory.
- ABB manufacturer order code 1STQ006900B0000.
- Manufacturer designation: CUBICLE P3 H=300MM W=400MM.
- P3 cubicle configuration.
- 300 mm nominal height.
- 400 mm nominal width.
- Designed for compatible low-voltage electrical distribution switchboard assemblies.
- Mechanical cubicle component for modular switchboard construction.
- Intended for integration with appropriate ABB structural and mounting accessories.
- Supports the arrangement of designated internal switchboard spaces.
- Application-specific accessory for professional electrical panel building.
- Manufacturer-defined size and configuration for accurate product identification.
P3 Cubicle Integration in ABB System pro E Power Switchboards
The ABB 1STQ006900B0000 P3 cubicle is intended for compatible mechanical arrangements within the System pro E Power switchboard platform. Modular electrical distribution assemblies incorporate enclosure structures, internal supports, mounting accessories and cubicle components to establish the required installation layout for electrical equipment.
The ABB System pro E Power range provides a modular platform for low-voltage main distribution switchboards used in industrial and commercial environments. Different electrical equipment configurations and compartment layouts require appropriately selected mechanical components. The ABB 1STQ006900B0000 is a cubicle accessory rather than a complete switchboard, circuit breaker or independent electrical protective device.
The manufacturer's designation specifies a 300 mm high by 400 mm wide P3 cubicle. These dimensions identify the stated product configuration. The cubicle depth, exact external dimensions, fixing arrangements and supplied component details are not established by the abbreviated designation and should be confirmed using ABB's applicable technical documentation.
The P3 reference is an essential part of the manufacturer's product identification. It should not automatically be interpreted as an ingress protection rating, a particular form of internal separation or a universal equipment compatibility classification. The precise technical meaning and associated assembly requirements should be verified against the relevant ABB System pro E Power instructions.
Correct installation requires confirmation of the intended cubicle position, compatible supporting structure, complementary accessories and equipment arrangement. The completed electrical distribution assembly must also satisfy the applicable requirements for electrical clearances, accessibility, mechanical construction and enclosure protection.
Selecting the Correct 300 mm P3 Cubicle Configuration
When specifying the ABB 1STQ006900B0000, panel builders should first confirm that the required cubicle configuration is P3 and that the intended installation arrangement calls for a 300 mm nominal height and 400 mm nominal width. Matching these designation details is important because System pro E Power assemblies can incorporate different compartment dimensions and mechanical arrangements.
The 300 mm height distinguishes this product from shorter or taller cubicle variants. However, the stated height and width alone do not establish the amount of usable internal installation space, the equipment that can be mounted or the mechanical clearances available within a completed assembly.
For reliable selection, the manufacturer's order code should be checked alongside the relevant switchboard assembly drawings, installation instructions and bill of materials. Any required mounting hardware, support components or additional accessories should be identified separately from the product designation.
Typical Applications
- ABB System pro E Power low-voltage main distribution switchboards.
- Compatible P3 cubicle and compartment arrangements.
- Modular electrical distribution board construction.
- Industrial electrical switchgear assembly projects.
- Commercial building electrical distribution installations.
- Switchboard layouts requiring a 300 mm × 400 mm P3 cubicle configuration.
- Internal switchboard compartment organisation.
- OEM electrical panel building and switchgear manufacturing.
- Electrical infrastructure and industrial power distribution projects.
- Compatible switchboard modifications, maintenance and refurbishment installations.
Technical Specifications
| Product group | System pro E Power |
|---|---|
| Manufacturer part number | 1STQ006900B0000 |
| ABB order code | 1STQ006900B0000 |
| Product designation | CUBICLE P3 H=300MM W=400MM |
| Product type | P3 cubicle component |
| Accessory category | Switchboard cubicle and compartment accessories |
| Compatible switchboard range | ABB System pro E Power |
| Cubicle configuration | P3 |
| Nominal height | 300 mm |
| Nominal width | 400 mm |
| Primary application | Compatible switchboard cubicle arrangements |
| Primary function | Mechanical component for designated cubicle configurations |
| System application | Low-voltage electrical distribution switchboards |
Frequently Asked Questions
What is the ABB 1STQ006900B0000 used for?
The ABB 1STQ006900B0000 is a P3 cubicle component for compatible ABB System pro E Power low-voltage switchboards. It is intended for designated mechanical cubicle arrangements within modular electrical distribution assemblies.
What are the dimensions of the ABB 1STQ006900B0000 P3 cubicle?
The manufacturer designation specifies a nominal height of 300 mm and width of 400 mm. The cubicle depth, exact external dimensions and fixing details are not established by the supplied designation and should be confirmed using ABB's technical documentation.
What does P3 mean in the ABB cubicle designation?
P3 is the manufacturer's configuration reference for this cubicle component. Its precise technical meaning should be confirmed from the relevant ABB System pro E Power documentation. It should not be assumed to indicate an IP rating, internal separation form or universal mounting standard.
Does the ABB 1STQ006900B0000 include electrical equipment?
The ABB 1STQ006900B0000 is identified as a P3 cubicle component, not as a complete electrical distribution assembly or protective device. The supplied designation does not confirm that circuit breakers, control equipment or other electrical devices are included. The exact contents should be verified before ordering.
Is the ABB 1STQ006900B0000 compatible with System pro E Power switchboards?
Yes. The ABB 1STQ006900B0000 belongs to the System pro E Power product group and is identified for a P3 cubicle configuration measuring 300 mm in nominal height and 400 mm in nominal width. Suitability for a particular switchboard arrangement should be verified against ABB's applicable assembly instructions.
Trusted by Electrical Panel Builders Worldwide
ABB System pro E Power accessories support the construction of modular low-voltage electrical distribution switchboards for industrial and commercial applications. The ABB 1STQ006900B0000 P3 cubicle provides a manufacturer-specified 300 mm × 400 mm component for compatible switchboard arrangements, supporting accurate product identification, structured assembly planning and organised electrical distribution installations.
