Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ006898B0000 ABB P3 Cubicle 200 x 400 mm System pro E power
ABB 1STQ006898B0000 is a P3 cubicle component with a specified height of 200 mm and width of 400 mm for compatible ABB System pro E power low-voltage switchgear assemblies.
£184.29
Why Choose the ABB 1STQ006898B0000 P3 Cubicle 200 x 400 mm?
The ABB 1STQ006898B0000 is a P3 cubicle component designed for compatible ABB System pro E power low-voltage switchgear assemblies. With a specified height of 200 mm and width of 400 mm, this product provides a manufacturer-designated cubicle element for modular electrical distribution installations. Identified by ABB order code 1STQ006898B0000, it belongs to the ABB System pro E power product group.
The ABB System pro E power range provides modular enclosure solutions for low-voltage electrical distribution systems. Its coordinated structural components, internal accessories and cubicle arrangements allow electrical panel builders to configure switchgear assemblies according to installation requirements. The ABB P3 cubicle component is identified for applications requiring the specified P3 configuration and 200 mm × 400 mm dimensions.
Designed for integration into compatible System pro E power assemblies, the ABB 1STQ006898B0000 supports accurate component selection during switchgear construction, maintenance and refurbishment. Its manufacturer-specific P3 designation helps distinguish the component from other cubicle configurations, while the stated dimensions allow panel builders to identify the appropriate product for their intended installation.
Key Advantages
- Genuine ABB System pro E power cubicle component.
- P3 configuration designation for compatible switchgear assemblies.
- 200 mm nominal height for the specified cubicle arrangement.
- 400 mm nominal width for compatible installation configurations.
- Supports modular construction of low-voltage electrical distribution equipment.
- Provides a manufacturer-identified component for accurate switchgear assembly planning.
- Suitable for compatible industrial and commercial electrical distribution installations.
- Supports equipment maintenance, refurbishment and replacement where the specified part is required.
Key Features
- ABB System pro E power product family.
- ABB order code 1STQ006898B0000.
- CUBICLE P3 H=200MM W=400MM product designation.
- P3 cubicle configuration.
- 200 mm specified height.
- 400 mm specified width.
- Designed for compatible modular low-voltage switchgear assemblies.
- Suitable for designated cubicle arrangements within electrical distribution cabinets.
- Manufacturer-specific identification supports accurate product selection.
- Applicable to compatible switchgear construction and replacement projects.
Technical Specifications
- Manufacturer: ABB
- Product family: System pro E power
- ABB order code: 1STQ006898B0000
- Part number: 1STQ006898B0000
- Product designation: CUBICLE P3 H=200MM W=400MM
- Product type: Cubicle component
- Configuration: P3
- Nominal height: 200 mm
- Nominal width: 400 mm
- Compatible enclosure family: ABB System pro E power
- Product category: Low-voltage switchgear cubicle components
- Primary application: Compatible modular electrical distribution assemblies
Modular Cubicle Integration for Low-Voltage Power Distribution
Low-voltage switchgear assemblies require coordinated enclosure components to accommodate electrical distribution, protection and control equipment. Modular cubicle arrangements help panel builders organise the internal layout of switchboards and select components according to the specified cabinet configuration. Correct dimensions and manufacturer compatibility are important considerations when planning these assemblies.
The ABB System pro E power product family supports modular switchgear construction through coordinated enclosure structures and installation accessories. The ABB 1STQ006898B0000 is designated as a P3 cubicle component with a specified height of 200 mm and width of 400 mm, providing a defined product reference for compatible electrical distribution installations.
The P3 designation should be matched to the relevant ABB System pro E power configuration and assembly documentation. The supplied product designation does not independently establish material, ingress protection, electrical current rating or detailed mounting requirements. These characteristics should be confirmed from the applicable manufacturer documentation and the design of the complete switchgear assembly.
Typical Applications
- ABB System pro E power low-voltage switchgear assemblies.
- Compatible P3 cubicle configurations.
- Industrial electrical distribution switchboards.
- Commercial building power distribution cabinets.
- Modular electrical enclosure construction.
- Switchgear installations requiring a 200 mm-high and 400 mm-wide cubicle component.
- Electrical panel manufacturing and system integration projects.
- Maintenance and replacement of designated ABB cubicle components.
Frequently Asked Questions
What is the ABB 1STQ006898B0000 cubicle component used for?
The ABB 1STQ006898B0000 is a P3 cubicle component intended for compatible ABB System pro E power low-voltage switchgear assemblies. It is designated for installations requiring the specified cubicle configuration and dimensions.
What are the dimensions of the ABB P3 cubicle component?
The product has a specified nominal height of 200 mm and width of 400 mm. These dimensions should be matched to the intended System pro E power assembly.
What does P3 mean in the ABB cubicle designation?
P3 is the configuration designation provided by ABB for this cubicle component. Its precise application and compatibility should be verified against the relevant ABB System pro E power selection and assembly documentation.
Which ABB enclosure range is the 1STQ006898B0000 associated with?
The component belongs to the ABB System pro E power product group, which provides modular enclosure and installation solutions for low-voltage electrical distribution assemblies.
What is the ABB order code for the P3 200 x 400 mm cubicle component?
The ABB order code is 1STQ006898B0000, identifying the P3 cubicle component with a specified height of 200 mm and width of 400 mm.
Trusted by Electrical Panel Builders and Switchgear Professionals
ABB System pro E power components support modular low-voltage electrical distribution assemblies used in industrial and commercial installations. The ABB 1STQ006898B0000 P3 cubicle component provides a manufacturer-designated product for compatible 200 mm × 400 mm switchgear configurations, supporting accurate parts selection, coordinated enclosure construction and effective electrical panel integration.
