Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ006179B0000 ABB System Pro E Power Fixed XT7 Installation Kit 400×600 3P/4P I IMO
ABB 1STQ006179B0000 is a System Pro E Power fixed Tmax XT7 circuit-breaker installation kit for compatible 3-pole and 4-pole arrangements in a nominal 400 mm x 600 mm configuration, designated I IMO.
£210.56
Why Choose the ABB System Pro E Power Fixed XT7 Installation Kit 400 × 600 3P/4P?
The ABB 1STQ006179B0000 is a dedicated fixed XT7 circuit-breaker installation kit designed for compatible ABB System Pro E Power low-voltage switchboard assemblies. Identified by the manufacturer as FIXED XT7 KIT 400X600 3P_4P I IMO, this accessory supports the integration of ABB Tmax XT7 moulded-case circuit-breaker equipment into the specified modular electrical distribution arrangement.
As part of the ABB System Pro E Power range, the kit provides an application-specific installation solution for professional electrical panel builders, switchgear manufacturers and industrial power distribution specialists. Its designated configuration supports fixed-mounted XT7 equipment in compatible 3-pole and 4-pole arrangements, helping panel builders select suitable installation accessories for the intended circuit-breaker layout.
The manufacturer designation specifies a nominal 400 mm × 600 mm installation configuration, together with the identifiers I IMO. These identifiers distinguish this version from other XT7 installation kits and should be checked against ABB's applicable technical documentation when confirming compatibility with the selected circuit-breaker and switchboard arrangement.
Key Advantages
- Genuine ABB System Pro E Power installation accessory for compatible low-voltage switchboards.
- Designed for the integration of ABB Tmax XT7 moulded-case circuit-breaker equipment.
- Supports the specified fixed-mounted circuit-breaker arrangement.
- Manufacturer-designated compatibility with 3-pole and 4-pole XT7 configurations.
- Designed for a nominal 400 mm × 600 mm installation configuration.
- Provides an application-specific solution for modular electrical distribution assemblies.
- Helps simplify installation component selection for compatible XT7 switchboard layouts.
- Supports organised equipment positioning within the designated enclosure structure.
- Suitable for professional switchboard construction and compatible refurbishment projects.
- Designed for integration into the ABB System Pro E Power modular platform.
Key Features
- ABB System Pro E Power product family.
- 1STQ006179B0000 manufacturer ordering code.
- FIXED XT7 KIT 400X600 3P_4P I IMO manufacturer designation.
- Dedicated installation kit for compatible ABB Tmax XT7 circuit-breaker equipment.
- Designed for a fixed circuit-breaker installation.
- Specified for 3-pole (3P) and 4-pole (4P) arrangements.
- 400 mm nominal installation dimension.
- 600 mm nominal installation dimension.
- Includes the manufacturer configuration identifiers I IMO.
- Designed for integration into compatible modular low-voltage switchboard assemblies.
- Application-specific accessory for professional electrical panel-building projects.
Fixed XT7 Circuit-Breaker Integration for Low-Voltage Power Distribution
The ABB Tmax XT7 belongs to ABB's moulded-case circuit-breaker range, which is used in low-voltage power distribution systems for circuit switching and electrical protection. Incorporating an XT7 device into a modular switchboard requires an installation arrangement compatible with the circuit-breaker frame, pole configuration, mounting type and selected enclosure structure.
The ABB 1STQ006179B0000 is specifically designated for a fixed XT7 installation. In a fixed-mounted arrangement, the circuit-breaker is installed in its designated position within the assembly rather than using a withdrawable mounting configuration. The manufacturer's 3P_4P designation identifies the supported pole arrangements, while 400X600 identifies the nominal installation configuration.
The additional I IMO identifiers form part of the manufacturer's product designation. Because XT7 installation accessories are configuration-specific, these identifiers should be matched against the intended circuit-breaker variant, operating arrangement and applicable ABB assembly documentation. The precise interpretation of the codes should not be assumed without the corresponding manufacturer reference.
This product is an installation kit rather than a complete circuit-breaker. Its designation does not establish the electrical current rating, breaking capacity, protection functions or operating characteristics of the completed installation. Those characteristics depend on the selected XT7 device and associated components. The finished switchboard should be designed, assembled and verified in accordance with applicable ABB instructions and the relevant requirements of the IEC 61439 series.
Typical Applications
- ABB System Pro E Power low-voltage switchboard assemblies.
- Fixed-mounted ABB Tmax XT7 circuit-breaker installations.
- Compatible 3-pole and 4-pole circuit-breaker arrangements.
- Industrial electrical power distribution systems.
- Commercial building low-voltage switchgear installations.
- Main and secondary electrical distribution switchboards.
- Modular electrical panel manufacturing and circuit-breaker integration.
- OEM switchgear construction and compatible electrical distribution refurbishment projects.
Technical Specifications
| Product group | System Pro E Power |
|---|---|
| ABB order code | 1STQ006179B0000 |
| Manufacturer designation | FIXED XT7 KIT 400X600 3P_4P I IMO |
| Product type | Fixed circuit-breaker installation kit |
| Associated circuit-breaker family | ABB Tmax XT7 |
| Mounting arrangement | Fixed |
| Supported pole configurations | 3P / 4P |
| First nominal installation dimension | 400 mm |
| Second nominal installation dimension | 600 mm |
| Manufacturer configuration identifiers | I IMO |
| Compatible enclosure system | ABB System Pro E Power |
| Equipment category | Low-voltage switchboard installation accessories |
| Application | Integration of compatible fixed XT7 circuit-breaker equipment |
| Installation location | Within a compatible modular switchboard assembly |
Frequently Asked Questions
What is the ABB 1STQ006179B0000 used for?
The ABB 1STQ006179B0000 is a fixed XT7 installation kit for compatible ABB System Pro E Power low-voltage switchboards. It supports the installation of the specified ABB Tmax XT7 circuit-breaker arrangement within a modular electrical distribution assembly.
Is this ABB XT7 installation kit suitable for both 3-pole and 4-pole circuit-breakers?
Yes. The manufacturer's 3P_4P designation identifies the specified 3-pole and 4-pole XT7 arrangements. The selected circuit-breaker variant, mounting configuration and associated accessories must also match the complete ABB installation requirements.
What does 400X600 mean in the ABB product designation?
The 400X600 designation identifies a nominal 400 mm × 600 mm installation configuration. These values should not be interpreted as independently verified overall dimensions of the supplied kit components. The exact orientation and mounting arrangement should be checked against ABB's technical documentation.
Does the ABB 1STQ006179B0000 include a complete Tmax XT7 circuit-breaker?
The product is designated as a fixed XT7 installation kit, not as a complete circuit-breaker. The precise kit contents and any separately required XT7 device, operating accessories or connection components should be confirmed against the applicable ABB product documentation.
What do I IMO mean, and is this kit compatible with every XT7 circuit-breaker?
I IMO are configuration identifiers included in ABB's manufacturer designation. Their precise meaning and the corresponding compatible equipment arrangements should be verified against ABB's technical documentation. The kit should not be assumed compatible with every XT7 circuit-breaker or System Pro E Power switchboard configuration.
Designed for Professional Electrical Panel Builders
ABB System Pro E Power installation accessories support professional switchboard construction by providing dedicated solutions for integrating compatible low-voltage switching and protection equipment. The ABB 1STQ006179B0000 is designated for fixed ABB Tmax XT7 installations in a nominal 400 mm × 600 mm configuration, supporting the specified 3-pole and 4-pole arrangements within compatible modular electrical distribution assemblies.
