Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ005573B0000 ABB System Pro E Power Top and Bottom Opening Accessory IP30/IP40 D1250 W300
ABB 1STQ005573B0000 System Pro E Power top and bottom opening accessory designed for IP30/IP40 low-voltage switchboard configurations with a nominal enclosure depth of 1250 mm and width of 300 mm.
£97.79
Why Choose the ABB 1STQ005573B0000 System Pro E Power Top and Bottom Opening Accessory?
The ABB 1STQ005573B0000 is a dedicated top and bottom opening accessory for the ABB System Pro E Power modular low-voltage switchboard system. Identified by the manufacturer as OPEN TOP BOTTOM IP30/40 D1250 W300, this component is designed for compatible switchboard configurations with a 1250 mm nominal depth and 300 mm nominal width.
As part of the ABB System Pro E Power range, this accessory supports the construction and configuration of professional electrical distribution assemblies. It provides a manufacturer-specific solution for top and bottom opening arrangements in compatible switchboard structures, helping electrical panel builders achieve consistent mechanical integration and organised enclosure construction.
Designed for IP30/IP40 switchboard configurations, the ABB 1STQ005573B0000 is suitable for installations requiring the specified top and bottom opening arrangement. Its compatibility with 1250 mm deep and 300 mm wide System Pro E Power structures makes it a practical component for industrial and commercial electrical distribution projects where accurate enclosure component selection is essential.
Key Advantages
- Purpose-designed top and bottom opening accessory for ABB System Pro E Power switchboards.
- Compatible with designated IP30/IP40 enclosure configurations.
- Designed for 1250 mm nominal switchboard depth.
- Suitable for 300 mm nominal switchboard width.
- Manufacturer-specific component for coordinated modular switchboard assembly.
- Supports professional top and bottom enclosure opening arrangements.
- Facilitates integration with compatible System Pro E Power structural components.
- Suitable for industrial and commercial low-voltage electrical distribution assemblies.
- Helps simplify component identification during switchboard design and construction.
- Suitable for new installations, enclosure modifications and compatible replacement applications.
Key Features
- ABB System Pro E Power switchboard accessory.
- Manufacturer order code: 1STQ005573B0000.
- Manufacturer designation: OPEN TOP BOTTOM IP30/40 D1250 W300.
- Top and bottom opening configuration.
- Designed for IP30 and IP40 switchboard arrangements.
- 1250 mm nominal enclosure depth compatibility.
- 300 mm nominal enclosure width compatibility.
- Dedicated mechanical component for compatible low-voltage switchboard structures.
- Designed for integration into the modular System Pro E Power enclosure platform.
- Suitable for professional electrical panel-building applications.
- Supports coordinated assembly of compatible enclosure opening arrangements.
- Manufacturer-specific accessory for accurate switchboard component selection.
Technical Specifications
- Manufacturer: ABB
- Product group: System Pro E Power
- Series: System Pro E Power
- Model / type: 1STQ005573B0000
- Manufacturer order code: 1STQ005573B0000
- Manufacturer designation: OPEN TOP BOTTOM IP30/40 D1250 W300
- Product type: Top and bottom opening accessory
- Accessory category: Switchboard enclosure accessories
- Opening arrangement: Top and bottom
- Compatible protection configurations: IP30 / IP40
- Nominal enclosure depth: 1250 mm
- Nominal enclosure width: 300 mm
- Installation system: ABB System Pro E Power modular switchboards
- Component classification: Mechanical enclosure accessory
- Primary function: Provision of a compatible top and bottom switchboard opening arrangement
- Application: Low-voltage electrical distribution assemblies
Reliable Enclosure Integration for Low-Voltage Switchboards
The ABB 1STQ005573B0000 top and bottom opening accessory is intended for use in compatible System Pro E Power electrical switchboard structures. Top and bottom opening arrangements form part of the enclosure configuration options used in low-voltage distribution assemblies, allowing panel builders to select the appropriate mechanical components for the intended installation.
The accessory is specifically designated for 1250 mm deep and 300 mm wide switchboard configurations associated with IP30/IP40 protection arrangements. These dimensions identify the compatible enclosure configuration and should not be interpreted as the overall physical dimensions of the accessory itself.
The IP30 and IP40 designations relate to the intended enclosure protection configurations. Under the IEC 60529 classification system, IP30 provides protection against access to hazardous parts with a tool and ingress of solid objects measuring 2.5 mm or larger, while IP40 provides protection against ingress of solid objects measuring 1 mm or larger. Neither designation provides a specified water-ingress protection rating.
The final degree of protection of a completed switchboard depends on the entire enclosure assembly, including the selected panels, openings, covers, seals and installation method. The ABB 1STQ005573B0000 should therefore be installed in accordance with the applicable System Pro E Power assembly instructions to maintain the intended enclosure configuration.
As a mechanical switchboard accessory, this component does not provide electrical switching, overload protection or short-circuit protection. Its role is to support the specified enclosure opening arrangement within a correctly configured low-voltage distribution system.
Typical Applications
- ABB System Pro E Power low-voltage switchboards.
- Top and bottom opening arrangements in compatible electrical enclosures.
- IP30 and IP40 switchboard configurations.
- Industrial electrical distribution panels.
- Commercial building power distribution assemblies.
- Main and secondary electrical distribution switchboards.
- Modular electrical enclosure construction.
- OEM switchboard manufacturing and electrical panel building.
- Industrial facilities and electrical infrastructure installations.
- Maintenance, refurbishment and modification of compatible System Pro E Power assemblies.
Frequently Asked Questions
What is the ABB 1STQ005573B0000 used for?
The ABB 1STQ005573B0000 is a top and bottom opening accessory designed for compatible ABB System Pro E Power low-voltage switchboards with a nominal depth of 1250 mm and width of 300 mm.
Which ABB product range does the 1STQ005573B0000 belong to?
The accessory belongs to the ABB System Pro E Power product group, a modular switchboard system used for industrial and commercial low-voltage electrical distribution assemblies.
What switchboard dimensions are compatible with this accessory?
The ABB 1STQ005573B0000 is specified for a 1250 mm nominal enclosure depth and 300 mm nominal enclosure width. These values identify the intended switchboard configuration rather than the overall dimensions of the accessory.
What does IP30/IP40 mean for this product?
The IP30/IP40 designation identifies the compatible switchboard protection configurations. IP30 provides protection against solid objects of 2.5 mm or larger, while IP40 provides protection against solid objects of 1 mm or larger. The completed enclosure must be assembled correctly to achieve its intended protection rating.
Does the ABB 1STQ005573B0000 provide waterproof protection?
No. The specified IP30 and IP40 configurations do not include a water-ingress protection rating. Applications requiring water resistance must use an appropriately rated complete enclosure system.
Is this accessory suitable for both top and bottom switchboard openings?
Yes. The manufacturer designation OPEN TOP BOTTOM identifies the component as a top and bottom opening accessory for the specified System Pro E Power enclosure configuration.
Can the 1STQ005573B0000 be used with any electrical enclosure?
The accessory is specifically identified for ABB System Pro E Power switchboards. Compatibility should be matched to the required enclosure depth, width, protection configuration and relevant ABB assembly instructions.
Is the ABB 1STQ005573B0000 an electrical protection device?
No. It is a mechanical switchboard enclosure accessory rather than a circuit breaker or protective device. It supports the specified enclosure opening arrangement and does not provide overload or short-circuit protection.
What is the ABB manufacturer order code for this product?
The official ABB manufacturer order code is 1STQ005573B0000, corresponding to the System Pro E Power accessory designated OPEN TOP BOTTOM IP30/40 D1250 W300.
Trusted by Electrical Panel Builders Worldwide
ABB System Pro E Power accessories provide coordinated mechanical solutions for professional low-voltage switchboard construction. The ABB 1STQ005573B0000 top and bottom opening accessory supports compatible IP30/IP40 enclosure arrangements with a nominal depth of 1250 mm and width of 300 mm, helping panel builders achieve consistent and professionally assembled electrical distribution systems.
