Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB 1STQ005305B0000 System pro E power XLP03 installation kit designed for a compatible single-XLP03 fuse-switch disconnector arrangement with a nominal 550 mm width configuration, 400 mm installation height and N1 designation.
£177.51
The ABB XLP03 Installation Kit B550 H400 N1, manufacturer order code 1STQ005305B0000, is a dedicated mechanical installation accessory from the ABB System pro E power range of modular low-voltage switchboard components. Identified by the manufacturer designation KIT XLP03 B550 H400 N1 XLP03, this kit is intended for a compatible switchboard arrangement accommodating one ABB XLP03 fuse-switch disconnector.
The manufacturer designation specifies a B550 width configuration, corresponding to a nominal 550 mm, and an installation height of 400 mm. The N1 identifier distinguishes this particular installation arrangement within the System pro E power accessory range, helping panel builders select the appropriate kit for their intended switchboard layout.
ABB XLP03 devices belong to the XLP family of low-voltage fuse-switch disconnectors, which combine switching and isolation functions with fuse-based circuit protection when correctly equipped. Integrating an XLP03 unit into a modular switchboard requires a compatible mechanical arrangement that accommodates the selected device, associated electrical connections and surrounding enclosure structure.
The ABB 1STQ005305B0000 provides a manufacturer-designated solution for this specific XLP03 installation configuration. It supports coordinated equipment positioning, organised enclosure construction and accurate accessory selection for professional electrical panel builders, switchboard manufacturers and maintenance specialists.
Low-voltage electrical distribution switchboards frequently incorporate fuse-switch disconnectors to provide controlled switching, isolation and fuse-based protection for selected circuits. Correct installation requires mechanical accessories that accommodate the intended equipment arrangement while maintaining the switchboard's structural and electrical design requirements.
The ABB 1STQ005305B0000 is specifically designated for a single XLP03 installation arrangement. This distinguishes it from accessories intended for multiple XLP devices or different fuse-switch disconnector sizes, helping panel builders identify the correct installation solution for the selected equipment.
The manufacturer designation includes B550 and H400, indicating a nominal 550 mm width configuration and 400 mm installation height. These dimensions relate to the specified switchboard arrangement and should not automatically be interpreted as the external dimensions of every individual component supplied within the kit.
The N1 identifier forms part of the official ABB product designation. It should be retained when specifying or ordering the installation kit because different System pro E power arrangements may require different mechanical accessories. The exact construction details associated with N1 should be confirmed using the applicable ABB assembly documentation.
ABB System pro E power supports modular switchboard construction through coordinated enclosure frames, mounting structures, equipment installation kits, internal covers and other accessories. Using a manufacturer-designated XLP03 installation kit helps maintain consistency between the planned equipment layout and the mechanical components selected for assembly.
When installing an XLP03 fuse-switch disconnector, the panel builder must also consider the selected device's operating access, terminal connections, conductor routing, applicable clearances and any required protective barriers. The installation kit must be used with the appropriate switchboard configuration and according to the relevant ABB instructions.
The manufacturer designation does not establish the kit's individual component contents, materials, surface finish, fixing hardware or included electrical connections. In particular, the installation kit should not be assumed to include the XLP03 fuse-switch disconnector or its fuse-links. These components should be checked separately against the project bill of materials.
The 1STQ005305B0000 is a mechanical installation accessory and does not independently determine the electrical ratings or protective performance of the installed equipment. Current rating, voltage rating, switching characteristics and fuse protection depend on the selected XLP03 device and associated components. The completed switchboard should be assembled and verified according to the applicable ABB instructions and relevant IEC/EN 61439 requirements.
| Product range | System pro E power |
|---|---|
| ABB order code | 1STQ005305B0000 |
| Manufacturer designation | KIT XLP03 B550 H400 N1 XLP03 |
| Product type | XLP03 installation kit |
| Accessory category | Low-voltage switchboard equipment installation accessories |
| Associated equipment family | ABB XLP |
| Associated equipment model | XLP03 |
| Specified equipment arrangement | One XLP03 unit |
| Nominal installation width configuration | B550 / 550 mm |
| Specified installation height | 400 mm |
| Additional configuration identifier | N1 |
| System compatibility | ABB System pro E power |
| Component function | Mechanical installation of compatible XLP03 equipment |
| Application | Modular low-voltage electrical distribution switchboards |
| Product classification | Mechanical switchboard installation accessory |
The ABB 1STQ005305B0000 is a System pro E power mechanical installation kit designed for a compatible switchboard arrangement accommodating one ABB XLP03 fuse-switch disconnector, with a nominal 550 mm width configuration, 400 mm installation height and N1 designation.
The manufacturer designation specifically identifies the ABB XLP03 fuse-switch disconnector. Compatibility with the selected device variant and surrounding enclosure arrangement should be confirmed using the relevant ABB System pro E power assembly documentation.
The product designation specifies N1 XLP03, identifying an arrangement for one XLP03 unit. The exact mechanical configuration and required installation components should follow the applicable ABB instructions.
B550 identifies the nominal 550 mm width configuration, while H400 specifies a 400 mm installation height. These values describe the intended switchboard arrangement rather than necessarily representing the physical dimensions of each individual kit component.
N1 is an identifier included in the manufacturer's designation for this XLP03 installation arrangement. The designation identifies a single-XLP03 configuration, but the precise construction details associated with N1 should be checked against the relevant ABB technical documentation.
The product is identified as an installation kit, and the supplied specification does not confirm that an XLP03 device is included. The fuse-switch disconnector, fuse-links and any additional required accessories should be checked separately against the ABB bill of materials.
The manufacturer designation specifically identifies XLP03. Compatibility with XLP02 or other XLP equipment sizes should not be assumed without confirmation from the relevant ABB installation documentation.
No. The 1STQ005305B0000 is a mechanical installation accessory. Electrical switching, isolation and fuse-based protection depend on the correctly selected and installed XLP03 device and associated fuse-links.
The official ABB order code is 1STQ005305B0000. This identifies the System pro E power installation kit designated KIT XLP03 B550 H400 N1 XLP03 for a compatible single-XLP03 arrangement with a nominal 550 mm width and 400 mm height.
ABB System pro E power installation accessories support coordinated mechanical integration of low-voltage electrical distribution equipment. The 1STQ005305B0000 XLP03 installation kit provides a dedicated B550 H400 N1 arrangement for one compatible XLP03 fuse-switch disconnector, helping professional panel builders maintain organised equipment layouts, accurate component selection and consistent modular switchboard construction.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.