Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB 1STQ005304B0000 System pro E power XLP02 installation kit designed for compatible low-voltage switchboard arrangements accommodating up to two XLP02 units within a nominal 450 mm width configuration and 600 mm installation height.
£196.39
The ABB XLP02 Installation Kit B450 H600, manufacturer order code 1STQ005304B0000, is a dedicated installation accessory from the ABB System pro E power range of modular low-voltage switchboard components. Identified by the manufacturer designation KIT XLP02 B450 H600 BIS ZU 2 XLP02, this kit is intended for a compatible switchboard arrangement accommodating two XLP02 units.
The manufacturer designation specifies a B450 configuration and 600 mm height. In this context, B450 identifies the nominal 450 mm width configuration associated with the installation arrangement. These dimensions help panel builders select the appropriate accessory for the intended System pro E power switchboard layout.
ABB XLP02 devices belong to the XLP family of fuse-switch disconnectors used in low-voltage electrical distribution systems. Integrating these devices into a modular switchboard requires a suitable mechanical installation arrangement that accommodates the selected equipment and corresponding enclosure structure.
The ABB 1STQ005304B0000 provides a manufacturer-designated kit for the specified two-device configuration, supporting coordinated equipment installation within compatible System pro E power assemblies. It is particularly relevant to professional panel builders, electrical contractors and switchboard manufacturers seeking an application-specific installation solution.
Low-voltage electrical distribution switchboards often incorporate fuse-switch disconnectors to provide switching, isolation and fuse-based circuit protection functions. Correct integration of this equipment requires a coordinated mechanical arrangement that accommodates the selected devices while maintaining the intended switchboard layout.
The ABB 1STQ005304B0000 is specifically identified for an installation arrangement involving two XLP02 units. This distinguishes it from accessories intended for a single device or other equipment sizes and helps panel builders identify the appropriate kit for the planned configuration.
The manufacturer designation includes B450 and H600, corresponding to a nominal 450 mm width configuration and 600 mm installation height. These values describe the designated switchboard arrangement and should not automatically be interpreted as the external dimensions of every individual component supplied within the kit.
ABB System pro E power uses a modular approach to switchboard construction, combining enclosure frames, structural profiles, mounting accessories, internal covers and equipment installation kits. Selecting the correct XLP02 installation accessory supports consistency between the planned equipment layout and the mechanical components used during assembly.
When arranging two XLP02 devices, installers must consider the relevant ABB equipment instructions, electrical connection requirements, conductor routing, operating access and any required clearances. The installation kit's compatibility with a particular XLP02 variant should be confirmed against the applicable ABB System pro E power assembly documentation.
The manufacturer designation does not establish the kit's individual component list, materials, surface finish, fixing hardware or the inclusion of electrical connections and protective covers. In particular, the kit should not be assumed to include the two XLP02 fuse-switch disconnectors or their fuse-links. The required equipment and accessories should be checked against the project bill of materials.
The 1STQ005304B0000 is a mechanical installation accessory and does not independently determine the electrical ratings of the installed XLP02 devices. Rated current, voltage, fuse characteristics, short-circuit performance and switching capabilities depend on the selected equipment and completed electrical design. The finished switchboard should be assembled and verified in accordance with the applicable ABB instructions and relevant IEC/EN 61439 requirements.
| Product range | System pro E power |
|---|---|
| ABB order code | 1STQ005304B0000 |
| Manufacturer designation | KIT XLP02 B450 H600 BIS ZU 2 XLP02 |
| Product type | XLP02 installation kit |
| Accessory category | Low-voltage switchboard equipment installation accessories |
| Associated equipment family | ABB XLP |
| Associated equipment model | XLP02 |
| Specified equipment quantity | Up to two XLP02 units in the designated arrangement |
| Nominal installation width configuration | B450 / 450 mm |
| Specified installation height | 600 mm |
| System compatibility | ABB System pro E power |
| Component function | Mechanical installation of compatible XLP02 equipment |
| Application | Modular low-voltage switchboard assemblies |
| Product classification | Mechanical switchboard installation accessory |
The ABB 1STQ005304B0000 is an installation kit from the System pro E power range, designed for a compatible switchboard arrangement accommodating two ABB XLP02 units within a nominal 450 mm width configuration and 600 mm installation height.
The manufacturer designation identifies the ABB XLP02 equipment model. Compatibility with specific XLP02 variants and the surrounding enclosure arrangement should be confirmed using the relevant ABB System pro E power installation documentation.
The manufacturer designation includes BIS ZU 2 XLP02, identifying an installation arrangement for up to two XLP02 units. The actual installed equipment configuration must follow the applicable ABB assembly instructions.
B450 identifies the nominal 450 mm width configuration, while H600 specifies a 600 mm installation height. These values relate to the designated switchboard arrangement rather than necessarily representing the external dimensions of each individual kit component.
The product is identified as an installation kit, and the supplied specification does not confirm that XLP02 devices are included. The fuse-switch disconnectors, fuse-links and any additional required accessories should be checked separately against the ABB bill of materials.
The manufacturer designation specifically identifies XLP02. Compatibility with other XLP sizes or equipment variants should not be assumed without confirmation from the relevant ABB technical documentation.
No. The 1STQ005304B0000 is a mechanical installation accessory. Electrical switching, isolation and fuse-based protection functions depend on the correctly selected and installed XLP02 equipment and associated fuse-links.
Yes, it can be considered for compatible refurbishment or replacement projects where an ABB System pro E power assembly requires the specified two-XLP02 installation arrangement with a B450 configuration and 600 mm height. The existing enclosure structure and mounting requirements should be checked before installation.
The official ABB order code is 1STQ005304B0000. This identifies the System pro E power installation kit designated KIT XLP02 B450 H600 BIS ZU 2 XLP02 for compatible arrangements accommodating two XLP02 units.
ABB System pro E power installation accessories support coordinated mechanical integration of low-voltage electrical distribution equipment. The 1STQ005304B0000 XLP02 installation kit provides a dedicated B450 H600 arrangement for up to two compatible XLP02 units, helping professional panel builders maintain organised equipment layouts, accurate component selection and consistent modular switchboard construction.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.