Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PVDT5813 1STQ005222B0000 is a System pro E power circuit breaker installation accessory for compatible Tmax T5 400–630 A, 3-pole or 4-pole configurations with an 800 mm nominal installation width and non-segregated N3 arrangement.
£291.12
The ABB PVDT5813 (1STQ005222B0000) is a dedicated circuit breaker mounting and installation accessory designed for compatible ABB System pro E power low-voltage switchgear and electrical distribution assemblies. Identified by the manufacturer's designation N3 T5 400_630A 3_4P F_V_W800 T F NO SEG, this accessory is intended for specified ABB Tmax T5 moulded case circuit breaker configurations in the 400–630 A range, supporting designated 3-pole and 4-pole arrangements.
As part of the ABB System pro E power series, the PVDT5813 supports the integration of compatible circuit breakers into modular electrical distribution switchboards. Its application-specific design helps panel builders and switchgear manufacturers construct suitable circuit breaker compartments while maintaining the mechanical arrangement required by the selected ABB switchboard configuration.
Specified for an N3 installation arrangement with a 600–800 mm class of modular switchboard applications, the PVDT5813 is specifically identified by the manufacturer for a nominal installation width of 800 mm. The product designation also identifies a non-segregated configuration and additional installation identifiers. This accessory is intended for use with appropriately selected ABB Tmax T5 circuit breakers and compatible System pro E power components, rather than functioning as a standalone electrical protection device.
The ABB PVDT5813 is intended for System pro E power switchboard assemblies incorporating compatible ABB Tmax T5 moulded case circuit breakers. These circuit breakers are used in low-voltage electrical distribution systems to provide switching and circuit protection, while dedicated mounting and installation accessories support their integration into suitable modular switchboard arrangements.
The manufacturer's designation specifies an N3 installation configuration, an associated breaker range of 400–630 A, 3-pole or 4-pole arrangements and an 800 mm nominal installation width. It also includes the configuration references F_V, T F and NO SEG. These identifiers help distinguish the PVDT5813 from other installation accessories within the System pro E power range and should be matched against ABB's relevant assembly documentation.
Correct installation of moulded case circuit breakers requires consideration of mechanical compatibility, electrical clearances, connection arrangements, thermal performance and the verified characteristics of the complete switchboard. The PVDT5813 is a mechanical installation accessory and does not independently provide a 400–630 A electrical current rating, overload protection or short-circuit protection. These characteristics depend on the installed circuit breaker and the approved switchboard assembly.
| Series | System pro E power |
|---|---|
| Manufacturer part number | 1STQ005222B0000 |
| Product type | Circuit breaker mounting / installation accessory |
| Manufacturer designation | N3 T5 400_630A 3_4P F_V_W800 T F NO SEG |
| Installation configuration | N3 |
| Associated circuit breaker family | ABB Tmax T5 |
| Designated circuit breaker current range | 400–630 A |
| Compatible pole configurations | 3-pole / 4-pole |
| Nominal installation width | 800 mm |
| Configuration identifier | F_V |
| Additional configuration identifier | T F |
| Segregation configuration | Non-segregated (NO SEG) |
| System compatibility | ABB System pro E power |
| Application | Low-voltage power distribution switchboard assembly |
| Accessory function | Installation of compatible Tmax T5 circuit breaker configurations |
The ABB PVDT5813 is a circuit breaker installation accessory designed for compatible ABB Tmax T5 arrangements within the ABB System pro E power modular low-voltage switchboard system.
The manufacturer's designation identifies ABB Tmax T5 circuit breaker configurations in the 400–630 A range, with specified 3-pole and 4-pole arrangements. Exact compatibility should be verified against ABB's System pro E power configuration documentation.
The PVDT5813 is specified for a nominal installation width of 800 mm, identified by W800 in the manufacturer's designation. This is the intended switchboard configuration width rather than a confirmed physical measurement of the accessory itself.
N3 identifies the specified installation configuration, while NO SEG indicates a non-segregated arrangement. The exact construction and internal separation requirements should be checked against ABB's relevant switchboard assembly instructions.
No. The 1STQ005222B0000 is a mounting and installation accessory for compatible ABB System pro E power assemblies. It does not include the protective functionality of a complete Tmax T5 circuit breaker and cannot independently provide switching, overload protection or short-circuit protection.
ABB System pro E power provides a modular platform for professional low-voltage electrical distribution and switchgear assemblies. The PVDT5813 offers a manufacturer-specific installation solution for designated Tmax T5 circuit breaker configurations, supporting consistent mechanical integration, organised panel construction and appropriate selection of compatible switchboard components.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.