Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ004229B0000 ABB PPFB1013 System pro E Power Blind Panel H100 L1250
ABB PPFB1013 System pro E Power blind panel with a nominal height of 100 mm and length of 1250 mm for covering designated openings or unused spaces in compatible modular low-voltage switchboard assemblies.
£61.03
Why Choose the ABB PPFB1013 System pro E Power Blinde Panel?
The ABB PPFB1013 is a blind panel with a nominal height of 100 mm and length of 1250 mm, designed for the ABB System pro E Power modular low-voltage switchboard range. Identified by manufacturer order code 1STQ004229B0000, this accessory provides a dedicated blanking panel solution for compatible electrical distribution board assemblies.
Blind panels are used in electrical switchboards to cover designated openings or unused equipment spaces, supporting an organised enclosure layout and helping restrict unintended access to internal components. The PPFB1013 provides a manufacturer-designated panel for applications requiring the specified dimensions.
As part of ABB's System pro E Power accessory range, the PPFB1013 supports professional switchboard construction, maintenance and refurbishment. Its authoritative manufacturer designation, BLINDE PANEL H=100MM L=1250MM, identifies the product's blanking function, height and length.
Key Advantages
- Dedicated blind panel for compatible ABB System pro E Power switchboards.
- Specified 100 mm nominal height for the designated panel arrangement.
- Specified 1250 mm nominal length for compatible switchboard installations.
- Provides a blanking solution for designated unused openings or equipment spaces.
- Supports organised and consistent internal switchboard layouts.
- Helps complete the intended physical barrier arrangement when correctly installed.
- Integrates with ABB's coordinated modular switchboard accessory system.
- Suitable for professional industrial and commercial electrical distribution assemblies.
- Manufacturer-specific identification simplifies product selection and replacement.
- Dedicated ABB order code supports accurate procurement and project documentation.
Key Features
- ABB System pro E Power switchboard accessory.
- PPFB1013 manufacturer model designation.
- 1STQ004229B0000 ABB order code.
- Blinde panel manufacturer product description.
- Blind/blanking panel functional configuration.
- 100 mm specified height.
- 1250 mm specified length.
- Intended for compatible modular low-voltage switchboard assemblies.
- Supports the covering of designated unoccupied panel spaces.
- Part of ABB's coordinated System pro E Power enclosure accessory range.
Blind Panel Installation for Modular Electrical Switchboards
The ABB PPFB1013 is intended for compatible System pro E Power configurations requiring a blanking panel with a specified 100 mm height and 1250 mm length. Its primary function is to cover designated switchboard spaces where the selected assembly design requires a blind panel rather than an equipment opening.
Modular electrical distribution boards are constructed using coordinated enclosure frames, mounting structures, equipment panels and accessories. Unused openings may require suitable blanking components to complete the intended enclosure arrangement. Selecting a manufacturer-designated blind panel helps maintain dimensional consistency within the system.
The PPFB1013 is particularly relevant to panel builders preparing switchboard layouts, equipment schedules and bills of materials. Its defined dimensions and ABB order code allow the specified blanking component to be identified consistently throughout procurement and installation.
The ABB System pro E Power platform provides a modular approach to low-voltage electrical distribution assemblies. The PPFB1013 belongs to its range of installation accessories and should be selected according to the relevant enclosure configuration, mounting requirements and ABB assembly drawings.
The PPFB1013 is a mechanical blanking accessory rather than an electrical protective device. Its exact material, thickness, finish, fixing arrangement and supplied hardware are not established by the product designation and should be verified using ABB's technical documentation.
A blind panel does not independently establish an enclosure's ingress protection rating or internal separation classification. The performance and conformity of the completed switchboard depend on its overall design, compatible components and correct installation, including verification against applicable IEC/EN 61439 requirements.
Typical Applications
- ABB System pro E Power main electrical distribution switchboards.
- Blanking of designated unused equipment openings.
- Covering compatible unoccupied spaces in modular electrical panels.
- Industrial low-voltage power distribution cabinets.
- Commercial building electrical distribution assemblies.
- Switchboard configurations requiring 100 mm-high blanking panels.
- Compatible installations requiring a 1250 mm-long panel.
- Professional electrical panel building and switchboard manufacturing.
- Maintenance, refurbishment and replacement of matching ABB blind panels.
Technical Specifications
| Series | System pro E Power |
|---|---|
| ABB order code | 1STQ004229B0000 |
| Product group | System Pro E Power |
| Product type | Blind panel |
| Accessory category | Switchboard blanking panels and enclosure accessories |
| Nominal height | 100 mm |
| Nominal length | 1250 mm |
| Panel configuration | Blind / blanking panel |
| Compatible switchboard family | ABB System pro E Power |
| Installation application | Blanking of designated openings or unused spaces in compatible switchboard assemblies |
| Manufacturer designation | BLINDE PANEL H=100MM L=1250MM |
Frequently Asked Questions
What is the ABB PPFB1013 used for?
The ABB PPFB1013 is a blind panel intended to cover designated openings or unused spaces in compatible ABB System pro E Power modular low-voltage switchboard assemblies.
What are the dimensions of the ABB PPFB1013 blind panel?
The manufacturer specifies a nominal height of 100 mm and length of 1250 mm. Exact overall dimensions and mounting details should be confirmed against ABB's technical drawings.
Which ABB switchboard range is compatible with the PPFB1013?
The PPFB1013 belongs to the ABB System pro E Power modular low-voltage switchboard range. Compatibility with a particular enclosure or panel configuration should be verified using the relevant ABB installation documentation.
What is the difference between a blind panel and a blind cell?
A blind panel is generally a blanking component used to cover a designated opening, while a blind cell refers to a blanked compartment or cell arrangement. The PPFB1013 is specifically identified by ABB as a BLINDE PANEL, and its precise mounting application should be confirmed against the relevant assembly drawings.
Does the ABB PPFB1013 include a complete switchboard enclosure?
No. The PPFB1013 is an individual blind panel accessory, not a complete enclosure. The required switchboard frame, mounting components, doors and additional accessories must be selected separately for the intended System pro E Power configuration.
Trusted by Electrical Panel Builders Worldwide
ABB System pro E Power provides coordinated enclosure and installation accessories for professional low-voltage switchboard construction. The PPFB1013 blind panel offers a manufacturer-designated 100 mm-high and 1250 mm-long blanking solution for compatible modular switchboard arrangements, supporting organised and consistent electrical distribution assembly construction.
