Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ004225B0000 ABB PVGE2440 Emax 2 E2.2 3P/4P Withdrawable Vertical Breaker Installation Kit W1250 H600
ABB PVGE2440 System pro E power vertical installation kit for compatible Emax 2 E2.2 three-pole and four-pole withdrawable air circuit breakers, specified for a 1250 mm wide and 600 mm high switchboard mounting arrangement.
£603.80
Why Choose the ABB PVGE2440 Emax 2 E2.2 Vertical Breaker Installation Kit?
The ABB PVGE2440 is a dedicated Emax 2 E2.2 vertical circuit breaker installation kit from the ABB System pro E power range of modular low-voltage switchboard accessories. Identified by the manufacturer designation KIT E2.2 3-4P W- VERT BREAKER W1250 H600, this kit is intended for compatible ABB Emax 2 E2.2 three-pole and four-pole withdrawable circuit breaker arrangements installed in a vertical configuration.
The kit is specified for a switchboard installation arrangement with a 1250 mm width and 600 mm height. These dimensions identify the relevant System pro E power mounting configuration and help panel builders select the correct installation accessory for their planned switchboard layout.
ABB System pro E power provides a coordinated modular platform for constructing low-voltage electrical distribution switchboards, while the ABB Emax 2 family provides air circuit breakers for power distribution and protection applications. The PVGE2440 supports the mechanical integration of these systems by providing a manufacturer-designated installation kit for the corresponding E2.2 withdrawable breaker arrangement.
Designed for professional electrical panel builders, switchboard manufacturers and maintenance specialists, the ABB PVGE2440 helps support consistent breaker positioning, coordinated enclosure construction and accurate component selection. The official ABB order code is 1STQ004225B0000.
Key Advantages
- Genuine ABB accessory: Part of the System pro E power modular low-voltage switchboard range.
- Emax 2 E2.2 compatibility: Specifically designated for compatible ABB E2.2 air circuit breaker installations.
- Three-pole and four-pole support: Intended for corresponding 3P and 4P breaker configurations.
- Withdrawable arrangement: Identified for the W-type E2.2 circuit breaker installation configuration.
- Vertical breaker installation: Designed for the specified vertical mounting arrangement.
- 1250 mm width: Supports accurate selection for the corresponding switchboard installation layout.
- 600 mm height: Matches the designated installation space within the compatible enclosure arrangement.
- Modular integration: Supports coordinated assembly with compatible ABB System pro E power structural components.
- Application-specific design: Provides a manufacturer-designated solution instead of relying on general-purpose mounting arrangements.
- Professional switchboard construction: Suitable for compatible commercial and industrial low-voltage distribution assemblies.
- Accurate procurement: ABB order code 1STQ004225B0000 supports component identification and replacement matching.
Key Features
- ABB System pro E power circuit breaker installation accessory.
- Manufacturer model: PVGE2440.
- Manufacturer designation: KIT E2.2 3-4P W- VERT BREAKER W1250 H600.
- Designed for the ABB Emax 2 E2.2 air circuit breaker frame.
- Compatible pole configurations: 3P and 4P.
- Specified breaker execution: Withdrawable (W).
- Installation orientation: Vertical.
- Specified switchboard arrangement width: 1250 mm.
- Specified installation arrangement height: 600 mm.
- Dedicated mechanical installation kit for compatible E2.2 breaker assemblies.
- Supports coordinated integration with compatible ABB switchboard structures.
- Suitable for professional low-voltage electrical distribution panel construction.
- ABB manufacturer order code: 1STQ004225B0000.
Reliable Vertical Integration for ABB Emax 2 E2.2 Withdrawable Circuit Breakers
Low-voltage power distribution switchboards require correctly selected installation accessories to accommodate air circuit breakers within the intended enclosure layout. The mechanical arrangement must account for the breaker frame, pole configuration, execution type, mounting orientation and surrounding switchboard structure.
The ABB PVGE2440 is specifically designated for the Emax 2 E2.2 frame in three-pole or four-pole withdrawable execution. The E2.2 belongs to ABB's Emax 2 air circuit breaker family, which is used in low-voltage power distribution and protection systems. Selecting the correct installation kit helps align the breaker configuration with the corresponding System pro E power switchboard arrangement.
The manufacturer designation specifies a vertical breaker installation with an arrangement width of 1250 mm and height of 600 mm. These values should be understood as dimensions associated with the specified installation configuration rather than automatically representing the external physical dimensions of every individual kit component.
The W designation identifies the withdrawable breaker arrangement. Withdrawable Emax 2 circuit breakers use an appropriate fixed part and associated withdrawal mechanism to permit movement between designated operating positions. The installation kit must therefore be selected for the intended withdrawable configuration rather than assumed to be interchangeable with accessories for fixed circuit breakers.
ABB System pro E power supports modular switchboard construction using coordinated enclosure structures, installation kits, covers, mounting components and internal accessories. The PVGE2440 provides a manufacturer-designated mechanical integration solution for the specified E2.2 configuration, helping panel builders plan the breaker installation within the intended enclosure layout.
The supplied designation does not establish the kit's individual component list, material, finish, fixing hardware or whether the breaker fixed part, electrical connections, barriers or other accessories are included. The PVGE2440 should not be assumed to include the Emax 2 circuit breaker itself. These details must be checked against the relevant ABB assembly documentation and bill of materials.
The installation kit is a mechanical accessory and does not independently determine the circuit breaker's rated current, breaking capacity, trip-unit functionality or the completed switchboard's short-circuit withstand characteristics. The electrical ratings depend on the selected E2.2 breaker and complete assembly design. Installation and verification should follow the applicable ABB instructions and relevant IEC/EN 61439 requirements.
Typical Applications
- ABB System pro E power modular low-voltage switchboards.
- Vertical installation of compatible ABB Emax 2 E2.2 air circuit breakers.
- Three-pole E2.2 withdrawable breaker mounting arrangements.
- Four-pole E2.2 withdrawable breaker mounting arrangements.
- Switchboard configurations requiring a 1250 mm wide breaker installation arrangement.
- Switchboard layouts requiring a 600 mm high installation arrangement.
- Main low-voltage electrical distribution switchboards.
- Industrial power distribution assemblies.
- Commercial building main distribution boards.
- Low-voltage switchboards incorporating withdrawable air circuit breakers.
- Professional electrical panel manufacturing and assembly.
- Compatible switchboard refurbishment and equipment replacement projects.
- Mechanical integration of Emax 2 protection equipment within ABB modular enclosures.
Technical Specifications
| Product range | System pro E power |
|---|---|
| ABB order code | 1STQ004225B0000 |
| Manufacturer designation | KIT E2.2 3-4P W- VERT BREAKER W1250 H600 |
| Product type | Circuit breaker installation kit |
| Accessory category | Low-voltage switchboard circuit breaker mounting accessories |
| Associated circuit breaker family | ABB Emax 2 |
| Compatible circuit breaker frame | E2.2 |
| Compatible pole configurations | 3-pole / 4-pole |
| Specified breaker execution | Withdrawable (W) |
| Installation orientation | Vertical |
| Specified installation width | 1250 mm |
| Specified installation height | 600 mm |
| System compatibility | ABB System pro E power |
| Component function | Mechanical installation of a compatible Emax 2 E2.2 withdrawable air circuit breaker arrangement |
| Product classification | Mechanical switchboard installation accessory |
Frequently Asked Questions
What is the ABB PVGE2440 used for?
The ABB PVGE2440 is a mechanical installation kit designed for compatible ABB Emax 2 E2.2 three-pole and four-pole withdrawable air circuit breakers in a vertical System pro E power switchboard arrangement with a specified width of 1250 mm and height of 600 mm.
Which ABB circuit breaker is compatible with the PVGE2440?
The manufacturer designation identifies the ABB Emax 2 E2.2 air circuit breaker frame in compatible 3P or 4P withdrawable execution. The exact breaker variant and installation components should be checked against the applicable ABB assembly documentation.
Does the ABB PVGE2440 support three-pole and four-pole breakers?
Yes. The manufacturer designation specifies 3-4P, indicating that the kit is intended for compatible three-pole and four-pole Emax 2 E2.2 withdrawable breaker configurations.
What does W mean in the ABB PVGE2440 designation?
The W designation identifies the withdrawable circuit breaker execution. The kit is intended for the corresponding E2.2 withdrawable installation arrangement and should not be assumed compatible with fixed-execution breakers.
What are the installation dimensions of the ABB PVGE2440?
The manufacturer designation specifies an installation arrangement with a 1250 mm width and 600 mm height. These values identify the intended switchboard configuration rather than necessarily representing the physical dimensions of each individual kit component.
Is the ABB PVGE2440 designed for vertical breaker installation?
Yes. The manufacturer designation explicitly identifies a vertical breaker installation. The surrounding enclosure structure and mounting arrangement must match the relevant ABB System pro E power assembly requirements.
Does the ABB PVGE2440 include the Emax 2 E2.2 circuit breaker?
The PVGE2440 is identified as an installation kit, and the supplied specification does not confirm that a circuit breaker is included. The E2.2 breaker, withdrawable fixed part and any additional required accessories should be checked separately against the ABB bill of materials.
Can the PVGE2440 be used with a fixed Emax 2 E2.2 breaker?
The manufacturer designation specifies a withdrawable (W) E2.2 configuration. Compatibility with fixed-execution circuit breakers should not be assumed; the appropriate installation kit must be selected for the actual breaker execution.
What is the ABB order code for the PVGE2440?
The official ABB order code is 1STQ004225B0000. This identifies the PVGE2440 System pro E power installation kit for compatible Emax 2 E2.2 three-pole and four-pole withdrawable circuit breakers in a vertical 1250 mm × 600 mm installation arrangement.
Designed for Professional Emax 2 Switchboard Integration
ABB System pro E power installation accessories support coordinated mechanical integration of low-voltage power distribution equipment. The PVGE2440 provides a dedicated vertical installation solution for compatible Emax 2 E2.2 three-pole and four-pole withdrawable breaker arrangements, helping professional panel builders maintain consistent switchboard layouts, accurate component selection and organised assembly.
