Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PPRA2027 System pro E power AER side/back enclosure panel with R configuration designation, specified for a height of 2000 mm and width of 1250 mm in compatible low-voltage switchboard arrangements associated with IP4X/IP5X protection classifications.
£281.50
The ABB PPRA2027 is a dedicated IP4X/IP5X AER side/back enclosure panel from the ABB System pro E power range of modular low-voltage switchboard components. Identified by the manufacturer designation IP4X_IP5X AER. SIDE/BA PAN.R.H2000W1250, this accessory is specified for compatible enclosure arrangements requiring a 2000 mm height and 1250 mm width.
ABB System pro E power provides a coordinated platform for constructing low-voltage electrical distribution switchboards using modular structural frames, enclosure panels, doors, mounting accessories and internal installation components. The PPRA2027 forms part of this system, providing a manufacturer-designated side/back covering solution for the corresponding AER enclosure configuration.
The product designation identifies IP4X and IP5X as associated enclosure protection classifications and includes the additional R configuration identifier. These characteristics distinguish the PPRA2027 from other System pro E power enclosure panels and should be matched to the intended switchboard arrangement using the applicable ABB assembly documentation.
With its specified 2000 mm × 1250 mm dimensions, the ABB PPRA2027 supports accurate component selection for professional electrical panel building, industrial distribution switchboard construction and compatible enclosure refurbishment. The official ABB order code is 1STQ004215B0000.
Low-voltage electrical distribution switchboards require correctly selected enclosure components to complete their mechanical structure and support the intended degree of protection. Side and rear panels form part of the physical enclosure boundary, helping separate installed electrical equipment from the surrounding environment when correctly integrated into the completed assembly.
The ABB PPRA2027 is specified as an AER side/back panel with a nominal height of 2000 mm and width of 1250 mm. These dimensions identify the corresponding panel configuration within the ABB System pro E power range and help panel builders select a component suited to the intended enclosure layout.
The product designation includes IP4X and IP5X. Under the IEC 60529 classification system, IP4X indicates protection against access to hazardous parts with a wire and against solid foreign objects measuring 1 mm or larger. IP5X indicates dust-protected construction, where dust ingress is not entirely prevented but must not occur in quantities that interfere with satisfactory equipment operation or impair safety.
These protection classifications relate to the applicable enclosure arrangement rather than automatically being achieved by an individual uninstalled panel. The completed switchboard must incorporate suitable structural components, panel interfaces, doors, joints, fixings and any required sealing arrangements to achieve its specified degree of protection.
The AER and R identifiers form part of the ABB manufacturer designation. Their precise mechanical implications should be established from the relevant System pro E power assembly documentation. In particular, the R identifier should not be assumed to describe a particular mounting position or handed arrangement without manufacturer confirmation.
The PPRA2027 provides a dedicated mechanical covering component for the specified switchboard configuration. The manufacturer designation establishes its principal dimensions and intended application but does not confirm its material, surface finish, thickness, fixing hardware or included sealing components. These details should be checked where they are important for installation planning.
The panel is a mechanical enclosure accessory, not an electrical protective device. It does not independently determine the rated current, short-circuit withstand capability, electrical protection functions or final ingress protection rating of the completed switchboard. The overall assembly should be designed and verified in accordance with the applicable IEC/EN 61439 requirements, with enclosure protection assessed against the relevant IP classification requirements.
| Product range | System pro E power |
|---|---|
| ABB order code | 1STQ004215B0000 |
| Manufacturer designation | IP4X_IP5X AER. SIDE/BA PAN.R.H2000W1250 |
| Product type | Side/back enclosure panel |
| Accessory category | Low-voltage switchboard enclosure panels |
| Specified panel height | 2000 mm |
| Specified panel width | 1250 mm |
| Associated protection classifications | IP4X / IP5X |
| Enclosure configuration | AER |
| Additional configuration identifier | R |
| Panel application | Side or rear enclosure covering arrangement |
| System compatibility | ABB System pro E power |
| Component function | Mechanical enclosure covering for compatible switchboard configurations |
| Product classification | Mechanical switchboard enclosure accessory |
The ABB PPRA2027 is an IP4X/IP5X AER side/back enclosure panel designed for compatible ABB System pro E power low-voltage switchboard assemblies requiring a panel with a specified height of 2000 mm and width of 1250 mm.
The manufacturer designation specifies a 2000 mm height and 1250 mm width. The supplied designation does not establish the panel thickness or any additional physical measurements.
IP4X identifies protection against access with a wire and against solid foreign objects of 1 mm and larger. IP5X identifies dust-protected construction and protection against access with a wire. The completed enclosure must be correctly designed and assembled to achieve its specified protection classification.
The manufacturer designation identifies the PPRA2027 as a side/back panel. Its suitability for either installation position depends on the specific ABB System pro E power enclosure arrangement and the applicable assembly drawings.
AER and R are configuration identifiers included in the manufacturer's product designation. Their precise installation meaning and compatibility requirements should be confirmed using the relevant ABB System pro E power technical documentation.
No. The PPRA2027 is associated with IP4X/IP5X enclosure configurations, but the final protection classification depends on the complete switchboard construction, including its frame, panel interfaces, doors, joints, fixing arrangements and any required sealing components.
No. The PPRA2027 is a mechanical side/back panel accessory rather than a complete electrical enclosure or distribution board. Other compatible structural and enclosure components are required to construct the finished switchboard.
Yes, it can be considered for compatible refurbishment or replacement projects where the existing ABB System pro E power assembly requires the same 2000 mm × 1250 mm AER side/back panel with the specified R configuration. The original enclosure arrangement and mounting requirements should be checked before installation.
The official ABB order code is 1STQ004215B0000. This identifies the PPRA2027 IP4X/IP5X AER side/back panel with a specified height of 2000 mm, width of 1250 mm and R configuration designation.
ABB System pro E power enclosure accessories support coordinated construction of modular low-voltage electrical distribution assemblies. The PPRA2027 provides a dedicated 2000 mm × 1250 mm AER side/back panel solution for compatible IP4X/IP5X switchboard configurations, helping panel builders maintain consistent enclosure dimensions, accurate component selection and organised assembly.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.