Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ004213B0000 ABB PPEA2017 IP4X/IP5X Aerated Side/Back Panel 2000 x 1000 mm
ABB PPEA2017 is an IP4X/IP5X aerated side/back panel measuring 2000 mm high by 1000 mm wide, designed for compatible ABB System pro E power low-voltage switchgear enclosures.
£474.53
Why Choose the ABB PPEA2017 IP4X/IP5X Aerated Side/Back Panel?
The ABB PPEA2017 is an IP4X/IP5X aerated side/back panel designed for compatible ABB System pro E power low-voltage switchgear enclosures. With a specified height of 2000 mm and width of 1000 mm, this enclosure accessory provides a designated panel arrangement for electrical distribution cabinets requiring an aerated side or rear covering. Identified by ABB order code 1STQ004213B0000, the PPEA2017 belongs to the ABB System pro E power product group.
The ABB System pro E power range provides modular enclosure solutions for low-voltage electrical distribution assemblies. Its coordinated structural components, enclosure panels and installation accessories enable electrical panel builders to configure switchgear cabinets for different installation requirements. The PPEA2017 aerated side/back panel is intended for compatible enclosure arrangements where ventilation provision is required alongside the appropriate protective covering.
Featuring a nominal size of 2000 mm × 1000 mm and an IP4X/IP5X protection designation, the ABB PPEA2017 provides a manufacturer-identified component for compatible switchgear configurations. Its aerated construction distinguishes it from a fully closed panel, supporting an enclosure arrangement designed to accommodate air movement. The protection achieved by the completed cabinet depends on the selected assembly configuration, associated components and correct installation.
Key Advantages
- Genuine ABB System pro E power enclosure accessory.
- Aerated side/back panel design for compatible ventilated switchgear arrangements.
- 2000 mm nominal height for designated electrical cabinets.
- 1000 mm nominal width for compatible enclosure configurations.
- IP4X/IP5X protection designation for the specified product arrangement.
- Supports modular construction of industrial and commercial electrical distribution assemblies.
- Provides a manufacturer-designated panel for compatible side or rear enclosure positions.
- Supports enclosure ventilation planning where an aerated covering is specified.
- Manufacturer-specific identification assists accurate component selection and replacement.
Key Features
- ABB System pro E power product family.
- PPEA2017 model designation.
- ABB order code 1STQ004213B0000.
- IP4X/IP5X protection designation.
- Aerated side/back panel construction.
- 2000 mm specified panel height.
- 1000 mm specified panel width.
- Designated for compatible side or rear enclosure arrangements.
- Supports ventilated configurations within modular low-voltage switchgear cabinets.
- Suitable for compatible electrical panel construction, assembly and replacement applications.
Technical Specifications
- Manufacturer: ABB
- Product family: System pro E power
- Model: PPEA2017
- ABB order code: 1STQ004213B0000
- Product designation: IP4X_IP5X AER.SIDE/BACK PAN.H2000 W1000
- Product type: Aerated enclosure side/back panel
- Protection designation: IP4X / IP5X
- Nominal height: 2000 mm
- Nominal width: 1000 mm
- Panel configuration: Aerated / ventilated
- Designated installation position: Side or back of compatible enclosure
- IP4X classification: Protection against solid foreign objects of 1 mm diameter and greater
- IP5X classification: Dust-protected classification
- Compatible enclosure family: ABB System pro E power
- Product category: Low-voltage switchgear enclosure side and back panels
- Primary function: Aerated side or rear covering for compatible electrical enclosures
- Application: Low-voltage electrical distribution and switchgear cabinet construction
Ventilated Side and Rear Panel Integration for Low-Voltage Switchgear
Low-voltage electrical distribution cabinets accommodate circuit breakers, busbar systems, switching devices and other electrical components within a protective enclosure. Correctly specified side and rear panels help complete the cabinet structure while supporting the intended installation arrangement. Where ventilation is required, aerated panels provide an alternative to fully closed coverings and form part of the overall enclosure design.
The ABB System pro E power range supports modular switchboard construction through coordinated enclosure frames, panels and installation accessories. The PPEA2017 is designated as an aerated side/back panel measuring 2000 mm high and 1000 mm wide, providing a defined component for compatible cabinet configurations requiring these dimensions.
The IP4X/IP5X designation identifies protection classifications relating to solid foreign objects and dust. IP4X indicates protection against objects of 1 mm diameter and greater, while IP5X indicates a dust-protected classification. Neither designation independently specifies water ingress protection. The final enclosure protection and ventilation performance depend on the complete switchgear configuration, the associated panel arrangement and correct installation in accordance with ABB documentation.
Typical Applications
- ABB System pro E power low-voltage switchgear enclosures.
- Compatible electrical distribution cabinets requiring aerated side or rear panels.
- Industrial power distribution switchboards.
- Commercial building electrical distribution assemblies.
- Modular switchgear cabinet construction and installation.
- Compatible enclosure configurations requiring 2000 mm-high and 1000 mm-wide panels.
- Electrical panel manufacturing and switchgear system integration projects.
- Maintenance and replacement of designated aerated enclosure panels.
Frequently Asked Questions
What is the ABB PPEA2017 aerated side/back panel used for?
The ABB PPEA2017 is an aerated side/back panel intended for compatible ABB System pro E power low-voltage switchgear enclosures. It provides a designated side or rear covering for cabinet arrangements requiring an aerated panel configuration.
What are the dimensions of the ABB PPEA2017?
The ABB PPEA2017 has a specified nominal height of 2000 mm and width of 1000 mm. These dimensions should be matched to the intended System pro E power enclosure configuration.
What do IP4X and IP5X mean for the ABB PPEA2017?
IP4X indicates protection against solid foreign objects of 1 mm diameter and greater, while IP5X indicates a dust-protected classification. The protection rating of the complete enclosure depends on its configuration and correct assembly.
Can the ABB PPEA2017 be used as both a side panel and a back panel?
The PPEA2017 is designated as an aerated side/back panel, indicating its intended use in compatible side or rear enclosure arrangements. The exact installation position and mounting requirements should be confirmed against the relevant ABB System pro E power assembly documentation.
What is the ABB order code for the PPEA2017 aerated panel?
The ABB order code is 1STQ004213B0000, identifying the PPEA2017 IP4X/IP5X aerated side/back panel with a specified height of 2000 mm and width of 1000 mm within the System pro E power range.
Trusted by Electrical Panel Builders and Switchgear Professionals
ABB System pro E power enclosure components support modular low-voltage electrical distribution installations across industrial and commercial environments. The ABB PPEA2017 IP4X/IP5X aerated side/back panel provides a manufacturer-designated accessory for compatible 2000 mm × 1000 mm enclosure arrangements, supporting accurate component selection, coordinated cabinet construction and appropriate ventilation planning.
